College of Engineering

Research Output 1973 2020

Filter
Conference article
1990

Optimal linear feedback control for non-linear-non-quadratic-non-Gaussian problems

Chang, R. J., 1990 May 1, In : Proceedings of the American Control Conference. p. 481-487 7 p.

Research output: Contribution to journalConference article

Feedback control
Feedback
Control systems
Controllers
Stochastic systems
6 Citations (Scopus)
Laminates
Buckling
Fibers
Composite materials
Fiber reinforced materials
1 Citation (Scopus)
Laminates
Composite materials
Elasticity
7 Citations (Scopus)

Pole-zero cancellations and closed-loop properties of an H mixed sensitivity design problem

Tsai, M. C., Geddes, E. J. M. & Postlethwaite, I., 1990 Dec 1, In : Proceedings of the IEEE Conference on Decision and Control. 2, p. 1028-1029 2 p.

Research output: Contribution to journalConference article

Design Sensitivity
Cancellation
Closed-loop
Pole
Poles
50 Citations (Scopus)

Synthesis and characterization of polyimides based on 2,2′-bis(trifluoromethyl)-4,4′-diaminobiphenyl

Harris, F. W., Hsu, L-C. & Tso, C. C., 1990 Apr 1, In : American Chemical Society, Polymer Preprints, Division of Polymer Chemistry. 31, 1, p. 342-343 2 p.

Research output: Contribution to journalConference article

Nylons
Polyamides
Polyimides
Hydrolysis
Polymers
11 Citations (Scopus)

Telefunctioning: An approach to telerobotic manipulations

Kazerooni, H., Tsay, T. I. & Moore, C. L., 1990 Dec 1, In : Proceedings of the American Control Conference. p. 2778-2783 6 p.

Research output: Contribution to journalConference article

Robots
Human robot interaction
Dynamic loads
Closed loop systems
Loads (forces)
3 Citations (Scopus)
Thermal stress
Cracks
Heat transfer
Thermoelasticity
Energy release rate
1989

Acoustic microscopy of heterogeneous matrix composites

Woo, E., 1989 Dec 1, In : Annual Technical Conference - Society of Plastics Engineers. p. 1127-1131 5 p.

Research output: Contribution to journalConference article

Wave interference
Rayleigh waves
Composite materials
Cracks
Imaging techniques
5 Citations (Scopus)

Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)

Liou, M. J., Young, W. B., Rupel, K., Han, K. & Lee, L. J., 1989 Dec 1, In : National SAMPE Technical Conference. 21, p. 1058-1066 9 p.

Research output: Contribution to journalConference article

Reaction injection molding
Resin transfer molding
Flow visualization
Fiber reinforced materials
Computer simulation

Effect of toughness modification on viscoelastic properties of epoxy matrix composites

Woo, E. & Schaffnit, R. S., 1989 Dec 1, In : Annual Technical Conference - Society of Plastics Engineers. p. 1155-1159 5 p.

Research output: Contribution to journalConference article

Toughness
Laminates
Fibers
Composite materials
Micromechanics

Frame approach to the H super-optimal solution

Gu, D. W., Tsai, M. C. & Postlethwaite, I., 1989 Dec 1, In : Proceedings of the IEEE Conference on Decision and Control. 2, p. 1477-1482 6 p.

Research output: Contribution to journalConference article

Optimal Solution
Hankel
Singular Values
6 Citations (Scopus)

FRASES. A knowledge representation scheme for engineering design

Hu, J., Huang, Y. & Rozenblit, J. W., 1989 Mar 1, In : Simulation Series. 20, 4, p. 141-146 6 p.

Research output: Contribution to journalConference article

Knowledge representation
Knowledge acquisition
Knowledge management
Knowledge based systems
Processing

Role of knowledge management in hierarchical model development

Huang, Y. M., Rozenblit, J. W. & Hu, J., 1989 Dec 1, In : Winter Simulation Conference Proceedings. p. 584-592 9 p.

Research output: Contribution to journalConference article

Knowledge Management
Hierarchical Model
Knowledge management
Knowledge Acquisition
Knowledge Representation

Stability analysis of closed-loop thermosyphon system

Hwang, C-C., Yin, S. H., Teng, J. T. & Tsai, M. J., 1989 Dec 1, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 107, p. 381-388 8 p.

Research output: Contribution to journalConference article

Thermosyphons
Grashof number
Natural convection
8 Citations (Scopus)
Polyimides
Solubility
Diamines
Rigidity
Acids

Thermal expansion of three-phase composite materials

Dvorak, G. J. & Chen, T., 1989 Dec 1, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Thermal expansion
Composite materials
Thermal stress
Volume fraction
Decomposition
30 Citations (Scopus)

Treatment of landfill leachate with an upflow anaerobic reactor combining a sludge bed and a filter

Chang, J. E., 1989 Jan 1, In : Water Science and Technology. 21, 4-5 -5 pt 1, p. 133-143 11 p.

Research output: Contribution to journalConference article

Land fill
sludge
sulfate
filter
Recovery
1988
2 Citations (Scopus)

Control and stability analysis of cooperating robots.

Kazerooni, H. & Tsay, J. T-I., 1988 Dec 1, In : Proceedings of the American Control Conference. 88 pt 1-3, p. 1382-1386 5 p.

Research output: Contribution to journalConference article

Robots
Manipulators
Point contacts
Position control
End effectors
1 Citation (Scopus)
Laplace transforms
Finite element method
Relaxation time
1 Citation (Scopus)

Hygrothermal effects on the stability of a cylindrical composite shell panel

Lee, S. Y. & Yen, W. J., 1988 Dec 1, In : American Society of Mechanical Engineers, Aerospace Division (Publication) AD. 13, p. 21-31 11 p.

Research output: Contribution to journalConference article

elastic modulus
modulus of elasticity
Elastic moduli
shell
shear

Large elastic deformation of shear deformable shells of revolution: Numerical and experimental results

Kempski, M. H., Taber, L. A. & Su, F. C., 1988 Dec 1, In : American Society of Mechanical Engineers (Paper). p. WA/APM48 6

Research output: Contribution to journalConference article

Elastic deformation
Rubber
Asymptotic analysis
Circular cylinders
Strain energy
1 Citation (Scopus)
Flow velocity
Trajectories
Temperature
2 Citations (Scopus)

On the stability of the constrained robotic maneuvers.

Kazerooni, H. & Tsay, J. T-I., 1988 Dec 1, In : Proceedings of the American Control Conference. 88 pt 1-3, p. 892-897 6 p.

Research output: Contribution to journalConference article

Robotics
Robots
Manipulators
Actuators
Stiffness
1 Citation (Scopus)
Linearization
Manipulators
Robots
1987

APPLICATION OF SIMULATION SENSITIVITY ANALYSIS TO FUNCTIONAL NEUROMUSCULAR STIMULATION OF GAIT.

Ju, M-S. & Mansour, J. M., 1987 Jan 1, In : American Society of Mechanical Engineers, Applied Mechanics Division, AMD. 84, p. 327-330 4 p.

Research output: Contribution to journalConference article

Sensitivity analysis
Computer simulation
1 Citation (Scopus)
Engine cylinders
Gasoline
Engines
Temperature
Thermocouples

COMBUSTION OF LIQUID FUEL SPRAYS IN STAGNATION FLOWS.

Chen, Z. H., Lin, T. H. & Sohrab, S. H., 1987 Dec 1, In : Chemical and Physical Processes in Combustion, Fall Technical Meeting, The Eastern States Section. p. 74. 1-74. 4

Research output: Contribution to journalConference article

Liquid fuels
Flow fields
Quartz
Methane
Air
3 Citations (Scopus)

GAIN SPACE STABILITY ANALYSIS OF NONLINEAR SYSTEMS UNDER PI CONTROL.

Boe, E., Hwang, S-H. & Chang, H. C., 1987 Dec 1, In : Proceedings of the American Control Conference. p. 263-269 7 p.

Research output: Contribution to journalConference article

Nonlinear systems
Open systems
System stability
Derivatives
Feedback

LASER-ENHANCED THERMOPHORESIS IN VERTICAL TUBE FLOWS.

Wang, C-Y., Morse, T. F. & Cipolla, J. W., 1987 Dec 1, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 82, p. 9-14 6 p.

Research output: Contribution to journalConference article

Thermophoresis
Pipe flow
Lasers
High power lasers
Buoyancy
1986
2 Citations (Scopus)

ACOUSTIC CURE MONITORING OF EPOXY MATRICES AND COMPOSITES.

Woo, E. & Seferis, J. C., 1986 Dec 1, In : Annual Technical Conference - Society of Plastics Engineers. p. 375-379 5 p.

Research output: Contribution to journalConference article

Acoustics
Monitoring
Composite materials
Micromechanics
Fibers
9 Citations (Scopus)

COMPUTATION OF STEADY 3-D SEPARATED FLOWS OVER AERODYNAMIC BODIES AT INCIDENCE AND YAW.

Pan, D. & Pulliam, T. H., 1986 Jan 1, In : AIAA Paper.

Research output: Contribution to journalConference article

Subsonic flow
Transonic flow
Factorization
Data structures
Aerodynamics
1 Citation (Scopus)
Electric heating elements
Engine cylinders
Natural convection
Heat transfer
Nusselt number

INTERFACIAL EFFECTS OF THE GROWTH OF SPHERICAL CRYSTAL NUCLEI IN SUBCOOLED LIQUID.

Jang, J. Y. & Lin, C. N., 1986 Dec 1, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Crystals
Kinetics
Liquids
Heat transfer
Microstructure
Finite element method
Jigs
Milling machines
Boring
Computer workstations
1 Citation (Scopus)
Natural convection
Heat transfer
Finite difference method
Flow patterns
Water

NEW APPROXIMATE LU FACTORIZATION SCHEME FOR THE REYNOLDS-AVERAGED NAVIER-STOKES EQUATIONS.

Pan, D. & Lomax, H., 1986 Jan 1, In : AIAA Paper.

Research output: Contribution to journalConference article

Factorization
Navier Stokes equations

ON THE MAXIMUM VALUE OF THE MAXIMUM DEGREE OF KINEMATIC CHAINS.

Yan, H. S. & Harary, F., 1986 Dec 1, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Kinematics
Graph theory
1 Citation (Scopus)

OPTIMUM STRUCTURAL SIZING OF CONVENTIONAL CANTILEVER AND JOINED WING CONFIGURATIONS USING EQUIVALENT BEAM MODELS.

Hajela, P. & Chen, J. L., 1986 Dec 1, In : AIAA Paper.

Research output: Contribution to journalConference article

Geometry
Computer program listings
Aerodynamics
1985
1 Citation (Scopus)

A. C. IMPEDANCE MEASUREMENT IN RANDOM METAL-INSULATOR COMPOSITES.

Chen, I-G. & Johnson, W. B., 1985 Dec 1, In : Proceedings - The Electrochemical Society. 85-8, p. 148-157 10 p.

Research output: Contribution to journalConference article

Composite materials
Metals
Ionic conductivity
Volume fraction
Electric Conductivity

AC IMPEDANCE MEASUREMENT IN RANDOM METAL-INSULATOR COMPOSITES.

Chen, I-G. & Johnson, W. B., 1985 Jan 1, In : Electrochemical Society Extended Abstracts. 85-1, 1 p.

Research output: Contribution to journalConference article

Composite materials
Metals
Polytetrafluoroethylenes
Volume fraction
Powders
2 Citations (Scopus)

CALCULATIONS OF TWO AND THREE-DIMENSIONAL TRANSONIC CASCADE FLOW FIELDS USING THE NAVIER-STOKES EQUATIONS.

Weinberg, B. C., Yang, R-J., McDonald, H. & Shamroth, S. J., 1985 Jan 1, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Navier Stokes equations
Flow fields
Cascades (fluid mechanics)
Turbulent flow
Turbines
2 Citations (Scopus)

COMPUTATIONAL METHOD FOR SHAPE OPTIMIZATION.

Hou, J. W., Chen, J. L. & Sheen, J. S., 1985 Jan 1, In : Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. pt 1, p. 629-638 10 p.

Research output: Contribution to journalConference article

Shape optimization
Computational methods
Sensitivity analysis

EFFECTS OF PLATING VARIABLES AND ADDITIVES ON THE INITIAL STAGE OF GOLD ELECTRODEPOSITION.

Lin, K-L., Weil, R. & Desai, K., 1985 Dec 1, In : Electrochemical Society Extended Abstracts. 85-2, p. 348-349 2 p.

Research output: Contribution to journalConference article

Plating
Electrodeposition
Gold
Melamine
Silver
2 Citations (Scopus)

FINITE ELEMENT MODELLING OF THE IMPACT RESPONSE OF LAMINATED PLATES WITH EDGE DEFECTS.

Jing, H. S. & Kenner, V. H., 1985 Dec 1, In : Developments in Mechanics. 13, p. 365-366 2 p.

Research output: Contribution to journalConference article

Defects
Piezoelectric transducers
Delamination
Transducers
Graphite

GENERALIZED SUCCESSIVE IMPROVEMENT OF THE MODIFIED DIFFERENTIAL APPROXIMATION IN PARTICIPATING RADIATIVE HEAT TRANSFER.

Wu, C-Y., Sutton, W. H. & Love, T. J., 1985 Jan 1, In : AIAA Paper.

Research output: Contribution to journalConference article

Scattering
Heat transfer
1 Citation (Scopus)

ROLE OF AXIAL EDGE EFFECTS AND CAVITATION IN LUBRICATION FOR SHORT JOURNAL BEARINGS.

Buckholz, R. H., Lin, J-F. & Pan, C. H. T., 1985 Jan 1, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Bearings (structural)
Journal bearings
Cavitation
Lubrication
Boundary layers
1984

CALCULATION OF TWO- AND THREE-DIMENSIONAL TRANSONIC CASCADE FLOW FIELD USING THE NAVIER-STOKES EQUATIONS.

Weinberg, B. C., Yang, R. J., Shamroth, S. J. & McDonald, H., 1984 Dec 1, In : NASA Conference Publication. p. 365-372 8 p.

Research output: Contribution to journalConference article

Navier Stokes equations
Flow fields
Turbines
Turbomachine blades
Pressure distribution
1 Citation (Scopus)

SHAPE OPTIMIZATION OF ELASTIC HOLLOW BARS.

Hou, J. W. & Chen, J. L., 1984 Dec 1, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Shape optimization
Keyways
Rigidity
Materials properties
Stiffness
1983

LASER INDUCED CONVECTION AND THERMOPHORESIS.

Wang, C. Y., Morse, T. F. & Cipolla, J., 1983 Dec 1, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 23, p. 13-19 7 p.

Research output: Contribution to journalConference article

Thermophoresis
Lasers
Convection

LASER INDUCED THERMOPHORESIS AND PARTICULATE DEPOSITION EFFICIENCY.

Cipolla, J., Wang, C. Y. & Morse, T. F., 1983 Dec 1, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 23, p. 21-27 7 p.

Research output: Contribution to journalConference article

Thermophoresis
Lasers