Department of Materials Science and Engineering

Research Output 1973 2020

Filter
Conference contribution
1981
9 Citations (Scopus)

HYDROTHERMAL REACTION SINTERING OF MONOCLINIC ZIRCONIA.

Yoshimura, M. & Somiya, S., 1981 Dec 1, Advances in Ceramics. Am Ceram Soc, p. 455-463 9 p. (Advances in Ceramics; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1982
4 Citations (Scopus)

DISCONTINUOUS COARSENING OF LAMELLAR CELLULAR PRECIPITATE IN AN Al-29 AT. PCT. Zn ALLOY.

Fournelle, R. A. & Ju, C-P., 1982 Dec 1, Unknown Host Publication Title. Aaronson, H. I., Laughlin, D. E., Sekerka, R. F. & Wayman, C. M. (eds.). Metallurgical Soc of AIME, p. 957-961 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coarsening
Precipitates

EFFECT OF SILICATE AND PHOSPHATE ON THE FATIGUE CRACK GROWTH RATES IN TYPE 403 STAINLESS STEEL IN CONCENTRATED SODIUM CHLORIDE AND SODIUM HYDROXIDE SOLUTIONS.

Tsai, W-T., Moccari, A. & Macdonald, D. D., 1982, Unknown Host Publication Title. NACE

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sodium chloride
Fatigue crack propagation
Silicates
Phosphates
Stainless steel
3 Citations (Scopus)

SYNTHESIS AND SINTERING OF ZIRCONIA FINE POWDERS BY HYDROTHERMAL REACTIONS FROM ZIRCONIUM METAL AND HIGH-TEMPERATURE HIGH-PRESSURE SOLUTIONS.

Yoshimura, M. & Somiya, S., 1982 Dec 1, Materials Science Monographs. Elsevier Scientific Publ Co, p. 417-422 6 p. (Materials Science Monographs; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1983

EFFECT OF POTENTIAL ON THE CORROSION FATIGUE CRACK GROWTH RATE IN TYPE 304 STAINLESS STEEL IN SODIUM SULFATE SOLUTION AT 250 degree C.

Tsai, W-T., Moccari, A., Szklarska-Smialowska, Z. & Macdonald, D. D., 1983, Unknown Host Publication Title. NACE

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion fatigue
Sodium sulfate
Fatigue crack propagation
Stainless steel
1 Citation (Scopus)

ELECTROPHORETIC MOBILITY STUDIES IN LIQUID-LIQUID EXTRACTION SYSTEMS.

Lin, K-L. & Osseo-Asare, K., 1983 Dec 1, Unknown Host Publication Title. p. 278-279 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrophoretic mobility
Liquids
4 Citations (Scopus)

FAST CRACK PROPAGATION ACROSS INTERFACES.

Huang, J-L., Virkar, A. V. & Huber, R. J., 1983 Dec 1, Fracture Mechanics of Ceramics. Bradt, R. C., Evans, A. G., Hasselman, D. P. H. & Lange, F. F. (eds.). Plenum Press, p. 121-135 15 p. (Fracture Mechanics of Ceramics; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack propagation
8 Citations (Scopus)

MASS TRANSFER IN CATALYTIC SYSTEMS: MICELLES, LIQUID MEMBRANES AND SINGLE DROPS.

Osseo-Asare, K., Lin, K. L. & Chaiko, D. J., 1983 Dec 1, Unknown Host Publication Title. p. 313-314 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid membranes
Micelles
Mass transfer
1984
19 Citations (Scopus)

Al//2O//3-ZrO//2 CERAMICS PREPARED FROM CVD POWDERS.

Hori, S., Yoshimura, M., Somiya, S. & Takahashi, R., 1984 Dec 1, Advances in Ceramics. Claussen, N., Ruehle, M. & Heuer, A. H. (eds.). American Ceramic Soc Inc, p. 794-805 12 p. (Advances in Ceramics; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical vapor deposition
Powders
Microcracks
Grain growth
Densification
5 Citations (Scopus)

PREPARATION OF MIXED FINE Al//2O//3-HfO//2 POWDERS BY HYDROTHERMAL OXIDATION.

Toraya, H., Yoshimura, M. & Somiya, S., 1984 Dec 1, Advances in Ceramics. Claussen, N., Ruehle, M. & Heuer, A. H. (eds.). American Ceramic Soc Inc, p. 806-815 10 p. (Advances in Ceramics; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Intermetallics
Particle size
Powders
Oxidation
Temperature
8 Citations (Scopus)

PREPARATION OF ZIRCONIA-ALUMINA FINE POWDERS BY HYDROTHERMAL OXIDATION OF Zr-Al ALLOYS.

Somiya, S., Yoshimura, M. & Rikugawa, S., 1984 Dec 1, Materials Science Research. Davis, R. F., Palmour, H. III. & Porter, R. L. (eds.). Plenum Press, p. 155-166 12 p. (Materials Science Research; vol. 17).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Alumina
Powders
Oxidation
1 Citation (Scopus)

SINTERING OF SYNTHETIC MICA BY A HYDROTHERMAL HOT ISOSTATIC PROCESS.

Hattori, T., Mohri, J. I., Yoshimura, M. & Somiya, S., 1984 Dec 1, Materials Science Monographs. Upadhyaya, G. S. (ed.). Elsevier, p. 153-155 3 p. (Materials Science Monographs).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mica
Sintering
Hot isostatic pressing
Phosphates
Temperature
1986
12 Citations (Scopus)

OXIDATION OF Si//3N//4 AND SiC BY HIGH TEMPERATURE - HIGH PRESSURE WATER VAPOR.

Yoshimura, M., Kase, J. & Somiya, S., 1986 Dec 1, Unknown Host Publication Title. Bunk, W. & Hausner, H. (eds.). Verlag Deutsche Keramische Gesellschaft, p. 529-536 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Water vapor
Structural ceramics
Powders
Oxidation
Oxidation resistance
3 Citations (Scopus)

RAPID QUENCHING OF MELTS IN THE SYSTEM ZrO//2-SiO//2-Al//2O//3.

Yoshimura, M., Kaneko, M. & Somiya, S., 1986 Feb 1, Journal de Physique (Paris), Colloque. 2 ed. p. 473-477 5 p. (Journal de Physique (Paris), Colloque; vol. 47, no. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rapid quenching
Mullite
Furnaces
Crystallization
Imaging techniques
1989

Impedance evaluation of lining materials of LLW canisters

Cheng, T. P., Lee, J. T. & Tsai, W-T., 1989, Low and Intermediate Level Radiactive Waste Management. Publ by ASME, p. 169-174 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Linings
Concretes
Electrochemical properties
Electrochemical corrosion
Portland cement
1993

Joining strategy for high heat flux materials

Ting, J-M., Lake, M. L., Lin, R. Y. & Eppich, C., 1993 Dec 1, Proceedings of SPIE - The International Society for Optical Engineering. Khounsary, A. M. (ed.). Publ by Society of Photo-Optical Instrumentation Engineers, p. 182-195 14 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1997).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Conductance
Joining
Heat Flux
Heat flux
heat flux
2 Citations (Scopus)

Stable Pt/Ge/Au ohmic contact to n-GaAs with a Ta-Si-N barrier

Chen, J. S., Kolawa, E., Ruiz, R. P. & Nicolet, M. A., 1993 Dec 1, III-V Electronic and Photonic Device Fabrication and Performance. Jones, K. S., Pearton, S. J. & Kanber, H. (eds.). Publ by Materials Research Society, p. 255-260 6 p. (Materials Research Society Symposium Proceedings; vol. 300).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ohmic contacts
electric contacts
barrier layers
Annealing
annealing
2 Citations (Scopus)

VGCF/carbon composites for plasma-facing materials

Lake, M. L. & Ting, J. M., 1993 Dec 1, Proceedings of SPIE - The International Society for Optical Engineering. Khounsary, A. M. (ed.). Publ by Society of Photo-Optical Instrumentation Engineers, p. 196-205 10 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1997).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Facings
carbon fibers
Carbon fibers
Vapors
vapors
2000
4 Citations (Scopus)

Direct fabrication of LiCoO2 films on papers by electrodeposition method with interfacial reaction

Fujiwara, T., Nakagawa, Y., Song, S. W., Teranishi, R., Watanabe, T. & Yoshimura, M., 2000 Dec 1, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 935-938 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface chemistry
Electrodeposition
Fabrication
Anodes
Substrates

Electrochemically deposited LiCoO2 film on platinum metal substrate under hydrothermal condition

Song, S. W., Fujita, H., Han, K. S., Yoshimura, M. & Sato, Y., 2000 Dec 1, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 975-978 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Platinum metals
Substrates
Powder metals
X ray diffraction analysis
Raman spectroscopy
1 Citation (Scopus)

Hydrothermal corrosion of TiN, TiAlN and CrN films on SUS-304 in 100 MPA water

Korablov, S. & Yoshimura, M., 2000 Dec 1, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 945-948 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion
Water
Temperature
Oxides
Physical vapor deposition
1 Citation (Scopus)

Materials interaction between inherent barrier Pb-free Sn-Zn-Al solder and Cu contact

Lin, K-L. & Hsu, H. M., 2000 Jan 1, International Symposium on Electronic Materials and Packaging, EMAP 2000. Institute of Electrical and Electronics Engineers Inc., p. 378-382 5 p. 904183. (International Symposium on Electronic Materials and Packaging, EMAP 2000).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soldering alloys
Aging of materials
Heat treatment
Interdiffusion (solids)
Diffusion barriers
2 Citations (Scopus)

Room-temperature direct patterning of crystalline inorganic materials on organic substrates by on-site solution reaction

Teranishi, R., Fujiwara, T., Watanabe, T. & Yoshimura, M., 2000 Dec 1, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 961-964 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystalline materials
Substrates
Ink jet printers
Ink jet printing
Cadmium sulfide
2001

Interfacial reaction of printed solder bump with UBM

Lin, K-L. & Chung, M. J., 2001 Jan 1, Advances in Electronic Materials and Packaging 2001. Lee, S. B. & Paik, K. W. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 146-149 4 p. 983974. (Advances in Electronic Materials and Packaging 2001).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface chemistry
Soldering alloys
Nickel
Ointments
Interdiffusion (solids)
1 Citation (Scopus)

The striated deformation of Sn solders under high frequency resonant vibration

Chuang, C. M., Lui, T. S. & Chen, L. H., 2001 Jan 1, Advances in Electronic Materials and Packaging 2001. Lee, S. B. & Paik, K. W. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 328-334 7 p. 984005. (Advances in Electronic Materials and Packaging 2001).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soldering alloys
Vibrations (mechanical)
Natural frequencies
Cracks
Fracture toughness
2002
10 Citations (Scopus)

Effects of gallium on wettability, microstructures and mechanical properties of the Sn-Zn-Ag-Ga and Sn-Zn-Ag-Al-Ga solder alloys

Chen, K. I. & Lin, K. L., 2002 Jan 1, Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002. Institute of Electrical and Electronics Engineers Inc., p. 49-54 6 p. 1188812. (Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gallium
Soldering alloys
Wetting
Mechanical properties
Microstructure
16 Citations (Scopus)

Interfacial reaction between Sn-Ag-Cu, Sn-Ag-Cu-Ni-Ge lead-free solders and metallic substrates

Chuang, C. M., Shi, P. C. & Lin, K-L., 2002 Jan 1, Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002. Institute of Electrical and Electronics Engineers Inc., p. 360-365 6 p. 1188865. (Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface chemistry
Soldering alloys
Intermetallics
Substrates
Lead-free solders
3 Citations (Scopus)

Microstructural features and vibration fracture behavior of Sn-Zn-Ag solder alloys

Song, J. M., Lan, G. F., Lui, T-S. & Chen, L. H., 2002 Jan 1, Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002. Institute of Electrical and Electronics Engineers Inc., p. 276-281 6 p. 1188850. (Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soldering alloys
Fracture toughness
Damping
Fatigue of materials
Cracks
4 Citations (Scopus)

The introduction of MEMS packaging technology

Hsieh, C. T., Ting, J-M., Yang, C. & Chung, C-K., 2002 Jan 1, Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002. Institute of Electrical and Electronics Engineers Inc., p. 300-306 7 p. 1188855. (Proceedings of the 4th International Symposium on Electronic Materials and Packaging, EMAP 2002).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MEMS
Packaging
Biochemistry
Consumer electronics
Modems
2003

Exploration of magnetoelectric thin-film sensors using superlattice composition spreads

Chang, K. S., Aronova, M. A., Gao, C., Lin, C. L., Simpers, J. H., Murakami, M. & Takeuchi, I., 2003 Jan 1, 2003 International Semiconductor Device Research Symposium, ISDRS 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 1 p. 1272099. (2003 International Semiconductor Device Research Symposium, ISDRS 2003 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thin films
Sensors
Chemical analysis
Magnetization
Piezoelectric materials

Microstructure mechanics: Investigation on deformation behavior of grain boundaries

Kuo, J-C., Raabe, D., Zaefferer, S., Roters, F., Zhao, Z. & Winning, M., 2003 Jul 7, 10th International Symposium Plasticity 03: Plasticity and its Current Applications. Quebec City, Canada

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2004

Design and fabrication of multi-microelectrode array with SAMs surface modification for neural prosthesis

Chang, C. H., Chen, J-J. & Liao, J-D., 2004 Dec 1, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 246-247 2 p. (Digest of Papers - Microprocesses and Nanotechnology 2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Neural prostheses
Microelectrodes
Surface treatment
Fabrication
Electrodes

Effect of the electrolyte composition on the electrochemical reactivation behavior of alloy 182 weld

Wu, T. F. & Tsai, W-T., 2004, EUROCORR 2004 - European Corrosion Conference: Long Term Prediction and Modelling of Corrosion.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrolytes
Welds
Corrosion
Chemical analysis
Grain boundaries

Self-assembled alternating nano-scaled layers

Wu, W. Y. & Ting, J. M., 2004 Jan 1, 2004 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2004. Nano Science and Technology Institute, p. 448-451 4 p. (2004 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2004; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sputter deposition
Sputtering
Diamonds
Microstructure
Carbon
2005
3 Citations (Scopus)

2-D computer simulation of rapid solidification

Nikolić, Z. S., Yoshimura, M. & Araki, S., 2005 Dec 1, Current Research in Advanced Materials and Processes, YUCOMAT VI - Proceedings of the 6th Conference of the Yugoslav Materials Research Society. p. 381-386 6 p. (Materials Science Forum; vol. 494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

rapid solidification
Rapid solidification
Solidification
computerized simulation
solidification
3 Citations (Scopus)

Amorphous diamond electron emission for thermal generation of electricity

Sung, J. C. M., Kan, K., Sung, M., Huang, J-L., Sung, E., Chen, C. P., Hsu, K. H. & Tai, M. F., 2005 Dec 1, 2005 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2005 Technical Proceedings. Laudon, M. & Romanowicz, B. (eds.). p. 193-196 4 p. (2005 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2005 Technical Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron emission
Diamonds
Electricity
Vacuum
Electrons

Characteristics of W-Ni-Fe-(Cr) in metal injection molding

Hung, F-Y., Lui, T-S. & Chen, L. H., 2005 Dec 1, MPMD Sixth Global Innovations Proceedings - Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metallurgy Res. and Development in the Transportation Industry. Bieler, T. R., Carsley, J. E., Fraser, H. L., Sears, J. W. & Smugeresky, J. E. (eds.). p. 321-331 11 p. (MPMD Sixth Global Innovations Proceedings - Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metall. Research and Development in the Transportation Industry).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Tungsten
Powders
Particle size
1 Citation (Scopus)

Design and implementation of a non-contact X-Y table with high temperature superconductors

Chen, H. S., Wang, C. C., Lai, W. C., Tsai, M. H., Chen, I-G., Cheng, M-Y. & Tsai, M-C., 2005 Dec 1, Proceedings of the 2005 IEEE International Conference on Mechatronics, ICM '05. p. 959-963 5 p. 1529391. (Proceedings of the 2005 IEEE International Conference on Mechatronics, ICM '05; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High temperature superconductors
Flux pinning
Stators
Permanent magnets
Superconducting materials

Effects of surface texturiimg on lubrication theory - Consideration of Electrodouble layer (EDL)

Li, W. L., 2005 Dec 1, Proceedings of the World Tribology Congress III - 2005. p. 317-318 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Texturing
Lubrication
Hydrodynamics
Surface roughness

Fabrication of Bi2O3 thin film by thermal-enhanced electroplating

Huang, C. C., Wen, T. Y. & Fung, K-Z., 2005, Solid Oxide Fuel Cells IX, SOFC IX: Materials - Proceedings of the International Symposium. Singhal, S. C. & Mizusaki, J. (eds.). Vol. PV 2005-07. p. 1137-1141 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroplating
Fabrication
Crystal orientation
Thin films
Oxidation
5 Citations (Scopus)

Fabrication of the patterned flexible OLEDs using a combined roller imprinting and photolithography method

Kao, P. C., Chu, S-Y., Zhan, C. Y., Hsu, L-C. & Liao, W. C., 2005 Dec 1, 2005 5th IEEE Conference on Nanotechnology. p. 885-887 3 p. 1500860. (2005 5th IEEE Conference on Nanotechnology; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photolithography
Lithography
Pixels
Fabrication
Wet etching
1 Citation (Scopus)

Modeling of heat transfer for laser-assisted direct nano imprint processing

Hsiao, F. B., Wang, D. B., Jen, C. P., Hsu, H. J., Chuang, C. H., Lee, Y-C. & Liu, C-P., 2005 Dec 1, 2005 IEEE International Conference on Robotics and Biomimetics, ROBIO. p. 747-751 5 p. 1708840. (2005 IEEE International Conference on Robotics and Biomimetics, ROBIO; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Melting
Contact resistance
Heat transfer
Lasers
Processing

Modeling of laser assisted direct imprinting process based on pulsed laser heating and elastodynamic theory

Lee, Y-C., Chuang, C. H., Wang, D. B., Liu, C-P. & Hsiao, F. B., 2005 Dec 1, 2005 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2005 Technical Proceedings. Laudon, M. & Romanowicz, B. (eds.). p. 680-683 4 p. (2005 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2005 Technical Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser heating
Pulsed lasers
Lasers
Quartz
Materials properties

Strain Distribution Analysis Using Digital- Image-Correlation Techniques

Tung, S. H., Kuo, J-C. & Shih, M. H., 2005 Dec 19, The Eighteenth KKCNN Symposium on Civil Engineering-NTU 29. Kaohsiung, Taiwan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2006

A hybrid nano-imprinting lithography based on infrared pulsed laser heating

Lee, Y. C., Chen, C. H. & Liu, C. P., 2006 Dec 1, Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS. p. 6-10 5 p. 4134891. (Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser heating
Infrared lasers
Silicon
Pulsed lasers
Heating
1 Citation (Scopus)

Calibration of the image distortion induced error for a plane strain field measured using digital image correlation techniques

Tung, S. H., Kuo, J-C. & Shih, M. H., 2006 Dec 1, Proceedings of the 5th International Conference on Engineering Computational Technology. (Proceedings of the 5th International Conference on Engineering Computational Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calibration
Photogrammetry
Digital cameras
Tensors
Interpolation
16 Citations (Scopus)

Carbon nanotube AFM probes for microlithography process control

Liu, H. C., Fong, D., Dahlen, G. A., Osborn, M., Hand, S. & Osborne, J. R., 2006 Jul 11, Metrology, Inspection, and Process Control for Microlithography XX. 61522Y. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6152 II).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microlithography
Carbon Nanotubes
Atomic Force Microscopy
Process Control
Nanotubes
1 Citation (Scopus)

Controllability of flatband voltage in high-k gate stack structures - Remarkable advantages of la2O3 over HfO2

Ohmori, K., Ahmet, P., Shiraishi, K., Yamabe, K., Watanabe, H., Akasaka, Y., Umezawa, N., Nakajima, K., Yoshitake, M., Nakayama, T., Chang, K. S., Kakushima, K., Nara, Y., Green, M. L., Iwai, H., Yamada, K. & Chikyow, T., 2006 Jan 1, ICSICT-2006: 2006 8th International Conference on Solid-State and Integrated Circuit Technology, Proceedings. IEEE Computer Society, p. 376-379 4 p. 4098113. (ICSICT-2006: 2006 8th International Conference on Solid-State and Integrated Circuit Technology, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Controllability
Electric potential
Gases
Charge transfer
Annealing
25 Citations (Scopus)

Critical dimension AFM tip characterization and image reconstruction applied to the 45 nm node

Dahlen, G., Osborn, M., Liu, B. H., Jain, R., Foreman, W. & Osborne, J. R., 2006 Jul 10, Metrology, Inspection, and Process Control for Microlithography XX. 61522R. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6152 II).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomic Force Microscopy
Critical Dimension
Image Reconstruction
image reconstruction
Image reconstruction
1 Citation (Scopus)

Determination of residual resist layer thickness in e-beam lithography based on energy dispersive X-ray spectrometer

Lee, Y. C., Chiu, C. Y., Liu, C. P., Hsiao, F. B. & Chen, C. H., 2006 Dec 1, Progress on Advanced Manufacture for Micro/Nano Technology 2005 - Proceedings of the 2005 International Conference on Advanced Manufacture. PART 1 ed. p. 43-48 6 p. (Materials Science Forum; vol. 505-507, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

X ray spectrometers
Polymethyl Methacrylate
Lithography
lithography
spectrometers