Department of Mechanical Engineering

Research Output 1978 2019

2019

3D dynamic thermal and thermomechanical stress analysis of a hot blast stove

Gan, Y. F., Jang, J-Y. & Wu, T. Y., 2019 Jan 1, (Accepted/In press) In : Ironmaking and Steelmaking.

Research output: Contribution to journalArticle

Stoves
Stress analysis
Linings
Refractory materials
Domes
2 Citations (Scopus)
Biopsy
Needles
Tissue
Torque

Active vibration suppression platform for milling machine

Yeh, C. W., Tsai, N-C., Chiu, H. L. & Hsieh, P. H., 2019 Jun 1, 2019 18th European Control Conference, ECC 2019. Institute of Electrical and Electronics Engineers Inc., p. 3450-3455 6 p. 8795682. (2019 18th European Control Conference, ECC 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

milling machines
Vibration Suppression
Milling machines
platforms
Vibration

A generalized framework for controlling FDR in gene regulatory network inference

Morgan, D., Tjärnberg, A., Nordling, T. & Sonnhammer, E. L. L., 2019 Mar 15, In : Bioinformatics. 35, 6, p. 1026-1032 7 p.

Research output: Contribution to journalArticle

Gene Regulatory Networks
Gene Regulatory Network
Genes
Bootstrapping
Bootstrap
1 Citation (Scopus)

A hydrolyzed chicken extract CMI-168 enhances learning and memory in middle-aged mice

Tsai, S. F., Chang, C-Y., Yong, S. M., Lim, A. L., Nakao, Y., Chen, S. J. & Kuo, Y-M., 2019 Jan 1, In : Nutrients. 11, 1, 27.

Research output: Contribution to journalArticle

Open Access
middle-aged adults
chicken meat
Meat
Chickens
ingredients

Analysis of a customized cervical collar to improve neck posture during smartphone usage: a comparative study in healthy subjects

Kuo, Y. R., Fang, J-J., Wu, C. T., Lin, R. M., Su, P-F. & Lin, C-L., 2019 Aug 1, In : European Spine Journal. 28, 8, p. 1793-1803 11 p.

Research output: Contribution to journalArticle

Posture
Healthy Volunteers
Neck
Head
Sports
1 Citation (Scopus)
Open Access
subdivisions
grooves
gratings
Sequence Analysis
Industry

A New Control Approach for Power Generation System Based on Compliance Ratio and Full Closed-loop Position Control

Huang, C. Y., Wu, B. F., Chen, C. L. & Tsai, M-C., 2019 Jan 9, 2018 International Automatic Control Conference, CACS 2018. Institute of Electrical and Electronics Engineers Inc., 8606744. (2018 International Automatic Control Conference, CACS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position Control
Closed-loop Control
Position control
Compliance
Power generation

An Intelligent Metrology Architecture with AVM for Metal Additive Manufacturing

Yang, H. C., Adnan, M., Huang, C. H., Cheng, F-T., Lo, Y-L. & Hsu, C. H., 2019 Jul 1, In : IEEE Robotics and Automation Letters. 4, 3, p. 2886-2893 8 p., 8733865.

Research output: Contribution to journalArticle

3D printers
Metrology
Manufacturing
Metals
Module

A novel design of an expandable cage used in posterior interbody fusion for lumbar spine surgery

Fang, J-J., Hsiao, Y. C. & Lin, R. M., 2019 Jan 1, In : Computer-Aided Design and Applications. 16, 4, p. 679-687 9 p.

Research output: Contribution to journalArticle

Cage
Spine
Surgery
Fusion
Fusion reactions
1 Citation (Scopus)

Anti-reflection nano-structures fabricated on curved surface of glass lens based on metal contact printing lithography

Su, W. X., Wu, C. Y. & Lee, Y-C., 2019 Jun 1, In : Microelectronic Engineering. 214, p. 15-20 6 p.

Research output: Contribution to journalArticle

curved surfaces
printing
Lithography
Printing
electric contacts
1 Citation (Scopus)

Application of Legendre orthogonal polynomial method in calculating reflection and transmission coefficients of multilayer plates

Guorong, S., Mingkun, L., Yan, L., Lee, Y-C., Bin, W. & Cunfu, H., 2019 Jan 1, In : Wave Motion. 84, p. 32-45 14 p.

Research output: Contribution to journalArticle

polynomials
solid-solid interfaces
reflectance
liquid-solid interfaces
coefficients

Atomistic study on shape memory properties of Ni-Al alloys

Chang, I-L., Hsu, C. C. & Chao, T. H., 2019 Jan 1, In : Journal of Materials Research.

Research output: Contribution to journalArticle

Shape memory effect
Recovery
recovery
Phase transitions
heating

A viscoplastic-based fatigue reliability model for the polyimide dielectric thin film

Chang, Y. C., Chiu, T-C., Yang, Y. T., Tseng, Y. H. & Chen, X. H., 2019 May 1, Proceedings - IEEE 69th Electronic Components and Technology Conference, ECTC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1359-1365 7 p. 8811235. (Proceedings - Electronic Components and Technology Conference; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dielectric films
Polyimides
Fatigue of materials
Thin films
Stress relaxation

Case Study: Taiwan's pathway into a circular future for buildings

Van Bueren, B. J. A., Leenders, M. A. A. M. & Nordling, T., 2019 Feb 25, In : IOP Conference Series: Earth and Environmental Science. 225, 1, 012060.

Research output: Contribution to journalConference article

Open Access
social housing
stakeholder
flora
village
innovation

Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

Jhong, K. J., Chang, T. W., Lee, W-S., Tsai, M-C. & Jiang, I. H., 2019 Mar 1, In : AIP Advances. 9, 3, 035317.

Research output: Contribution to journalArticle

Open Access
electric motors
melting
electromagnetic properties
eddy currents
printing
Carrier mobility
Carrier concentration
Electric properties
Optical properties
Glass

Configuration synthesis of two-mode hybrid transmission systems with nine-link mechanisms

Ho, T. T. & Hwang, S-J., 2019 Dec 1, In : Mechanism and Machine Theory. 142, 103615.

Research output: Contribution to journalArticle

Kinematics
Clutches
Brakes
Gears

Contact photolithography at sub-micrometer scale using a soft photomask

Wu, C. Y., Hsieh, H. & Lee, Y-C., 2019 Aug 1, In : Micromachines. 10, 8, 547.

Research output: Contribution to journalArticle

Open Access
Photomasks
Photolithography
Polydimethylsiloxane
Photoresists
Linewidth

Control System Design of Power Assisted Bike Based on Planetary Gear

Chen, C. L., Wang, C. C., Tsai, M-C. & Ko, P. J., 2019 Feb 20, 2019 1st International Symposium on Instrumentation, Control, Artificial Intelligence, and Robotics, ICA-SYMP 2019. Institute of Electrical and Electronics Engineers Inc., p. 171-174 4 p. 8646306. (2019 1st International Symposium on Instrumentation, Control, Artificial Intelligence, and Robotics, ICA-SYMP 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

control systems design
Gears
Systems analysis
Control systems
torque

Design and Realization of a Novel Elastomer Characterization System for Precision Positioning Application

Lin, P. C., Cheng, Y. F. & Chen, K-S., 2019 Jan 23, Proceedings of the 2018 18th International Conference on Mechatronics - Mechatronika, ME 2018. Maga, D., Stefek, A. & Brezina, T. (eds.). Institute of Electrical and Electronics Engineers Inc., 8624672. (Proceedings of the 2018 18th International Conference on Mechatronics - Mechatronika, ME 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Elastomers
Precision engineering
Rubber
Stiffness
1 Citation (Scopus)

Design of a measurement system for six-degree-of-freedom geometric errors of a linear guide of a machine tool

Liu, C-S., Lai, J. J. & Luo, Y. T., 2019 Jan 1, In : Sensors (Switzerland). 19, 1, 5.

Research output: Contribution to journalArticle

Yaws
machine tools
Machine tools
degrees of freedom
Theoretical Models

Design of a miniature series elastic actuator for bilateral teleoperations requiring accurate torque sensing and control

Yu, Y. L. & Lan, C-C., 2019 Apr 1, In : IEEE Robotics and Automation Letters. 4, 2, p. 500-507 8 p., 8604035.

Research output: Contribution to journalArticle

Teleoperation
Remote control
Torque
Actuator
Sensing
1 Citation (Scopus)

Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification

Kuo, J. K., Huang, P. H., Lai, S. H-Y. & Wu, W. J., 2019 Jan 16, In : International Journal of Advanced Manufacturing Technology. 100, 1-4, p. 529-540 12 p.

Research output: Contribution to journalArticle

Exhaust manifolds
Casting
Stainless steel
Defects
Porosity

Design of VCM actuator for optical zooming smartphone cameras

Chang, Y. H., Hu, C. C., Hsieh, C. L. & Liu, C-S., 2019 Jan 9, In : Microsystem Technologies. 25, 1, p. 277-281 5 p.

Research output: Contribution to journalArticle

Smartphones
Actuators
actuators
Cameras
cameras
Mechanical properties
3D printers
Frequency division multiplexing
Air permeability
Static analysis

DIC image on FIB ring-core analysis of depth sensing residual stress measurement of thin films

Pan, W. C., Tsai, A. T., Cheng, F. Y., Chen, T. Y-F. & Lin, M. T., 2019 Jan 1, Advancement of Optical Methods and DigitalImage Correlation in Experimental Mechanics - Proceedings of the 2018 Annual Conference on Experimentaland Applied Mechanics. Sutton, M. A., Lin, M-T., Reu, P. L., Furlong, C., Lamberti, L. & Sciammarella, C. (eds.). Springer New York LLC, p. 109-111 3 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Core analysis
Stress measurement
Focused ion beams
Residual stresses
Thin films

Dual-mode power drive for active magnetic bearings

Chiu, H. L. & Tsai, N-C., 2019 Feb 1, In : IET Electric Power Applications. 13, 2, p. 162-167 6 p.

Research output: Contribution to journalArticle

Magnetic bearings
Networks (circuits)
Digital signal processors
Power amplifiers
Pulse width modulation
Enclosures
Natural convection
Pipelines
Heat transfer
Flow of fluids
Viscoelasticity
Medical problems
Rats
Optical tomography
Elastic moduli

Effects of substrate structure on the warpage of flip chip IC packages

Lee, Y. S., Lin, P. Y., Wu, K. T., Lee, H-H. & Hwang, S-J., 2019 Jan 24, 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018. IEEE Computer Society, p. 66-70 5 p. 8625738. (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Substrates
Thermal effects
Thermal expansion
Electromagnetic compatibility
Encapsulation
Open Access
Laser modes
Sulfur
Powders
Stainless Steel
Melting
1 Citation (Scopus)

Elastic wave propagation of two-dimensional metamaterials composed of auxetic star-shaped honeycomb structures

Chang, S. Y., Chen, C-D., Yeh, J. Y. & Chen, L-W., 2019 Mar 1, In : Crystals. 9, 3, 121.

Research output: Contribution to journalArticle

Open Access
Honeycomb structures
honeycomb structures
Elastic waves
Metamaterials
elastic waves

Electrochemical properties of biopolymers in strong acid and application in displacement sensor

Shi, S-C., 2019 Jan 1, In : Sensors and Materials. 31, 5, p. 1599-1608 10 p.

Research output: Contribution to journalArticle

Open Access
hydroxypropylmethylcellulose acetate succinate
phthalates
Biopolymers
Steel
biopolymers
Pyrometers
Melting
Stainless steel
Calibration
Lasers

Enhanced cell proliferation on biomedical titanium surfaces by laser ablation-induced micro- And nanoscale hybrid structures

Lee, H-T. & Lin, C. C., 2019 Jan 1, In : Materials Transactions. 60, 9, p. 1799-1806 8 p.

Research output: Contribution to journalArticle

hybrid structures
Cell proliferation
Laser ablation
Titanium
microbalances

Experimental study of cooling characteristics of water-based alumina nanofluid in a minichannel heat sink

Ho, C-J., Liao, J. C., Li, C. H., Yan, W. M. & Amani, M., 2019 Sep 1, In : Case Studies in Thermal Engineering. 14, 100418.

Research output: Contribution to journalArticle

Open Access
Aluminum Oxide
Heat sinks
Reynolds number
Alumina
Cooling
5 Citations (Scopus)
ceilings
Aluminum Oxide
wall temperature
heat sinks
Ceilings
2 Citations (Scopus)

Experimental study of transient thermal characteristics of nanofluid in a minichannel heat sink with MEPCM layer in its ceiling

Ho, C-J., Liao, J. C., Yan, W. M. & Amani, M., 2019 Apr 1, In : International Journal of Heat and Mass Transfer. 133, p. 1041-1051 11 p.

Research output: Contribution to journalArticle

ceilings
heat sinks
Ceilings
Heat sinks
wall temperature

Fabrication of thin-film spherical anodic alumina oxide templates using a superimposed nano-micro structure

Chung, C-K., Tu, K. T., Chang, C. Y. & Peng, Y. C., 2019 Mar 15, In : Surface and Coatings Technology. 361, p. 170-175 6 p.

Research output: Contribution to journalArticle

Aluminum Oxide
Oxides
Alumina
templates
aluminum oxides

Fatigue crack growth on the interface of copper and epoxy molding compound under mixed-mode loading

Chen, Y. J., Deng, Y. A. & Chiu, T-C., 2019 Jan 24, 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018. IEEE Computer Society, p. 139-142 4 p. 8625759. (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sheet molding compounds
Fatigue crack propagation
Fatigue of materials
Copper
Cracks

Finite Element Input Shaping Design for Vibration Suppression of Mechatronics Systems

Chen, W., Chen, K-S. & Tsai, M-C., 2019 May 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 37-42 6 p. 8722868. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration Suppression
Mechatronics
Finite Element
Motion
Finite Element Simulation
2 Citations (Scopus)

High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation

Tsai, S. P., Tsai, Y. T., Chen, Y. W., Chen, P. J., Chiu, P. H., Chen, C. Y., Lee, W-S., Yeh, J. W. & Yang, J. R., 2019 Jan 1, In : Materials Characterization. 147, p. 193-198 6 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
Entropy
entropy
strain hardening
1 Citation (Scopus)
Machine tools
Machining
Compensation and Redress
Kinematics
Controllers
4 Citations (Scopus)
Machine tools
Calibration
Inverse kinematics
Machining
Kinematics

Influence of equivalence ratio on flame acceleration and detonation transition of ethylene/oxygen mixture in a narrow channel

Chan, H. P., Su, W. Y., Tseng, Y. C. & Wu, M-H., 2019 Jan 1.

Research output: Contribution to conferencePaper

Detonation
detonation
equivalence
flames
Ethylene
1 Citation (Scopus)

Investigation on the P-V-T-C property characterization and its importance on IC encapsulation material application

Wang, C. C., Huang, C. T., Hsu, C. C., Chang, R. Y., Huang, R., Huang, M. F. & Hwang, S-J., 2019 Feb 6, Proceedings of PPS-34: 34th International Conference of the Polymer Processing Society - Conference Papers. Liu, S-J. (ed.). American Institute of Physics Inc., 020006. (AIP Conference Proceedings; vol. 2065).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

warpage
shrinkage
industries
plungers
trends

Leaderless Consensus for Multiple Euler-Lagrange Systems with Event-Triggered Communication

Liu, Y-C., 2019 Jan 16, Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 2657-2662 6 p. 8616450. (Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Communication
Multi agent systems
Telecommunication networks
Damping
Topology

Maskless lithography based on digital micromirror device (DMD) and double sided microlens and spatial filter array

Dinh, D. H., Chien, H. L. & Lee, Y-C., 2019 May 1, In : Optics and Laser Technology. 113, p. 407-415 9 p.

Research output: Contribution to journalArticle

Digital devices
Lithography
lithography
Microfabrication
filters

Micro-explosion of emulsified fuel droplet and its combustion characteristics in a boiler

Hsuan, C. Y., Hou, S. S., Wang, Y. L. & Lin, T-H., 2019 Jan 1.

Research output: Contribution to conferencePaper

Fuel Oils
fuel oils
Residual fuels
boilers
Fuel oils