Department of Mechanical Engineering

Research Output 1978 2019

Filter
Conference contribution
2019

A New Control Approach for Power Generation System Based on Compliance Ratio and Full Closed-loop Position Control

Huang, C. Y., Wu, B. F., Chen, C. L. & Tsai, M-C., 2019 Jan 9, 2018 International Automatic Control Conference, CACS 2018. Institute of Electrical and Electronics Engineers Inc., 8606744. (2018 International Automatic Control Conference, CACS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position Control
Closed-loop Control
Position control
Compliance
Power generation

Control System Design of Power Assisted Bike Based on Planetary Gear

Chen, C. L., Wang, C. C., Tsai, M-C. & Ko, P. J., 2019 Feb 20, 2019 1st International Symposium on Instrumentation, Control, Artificial Intelligence, and Robotics, ICA-SYMP 2019. Institute of Electrical and Electronics Engineers Inc., p. 171-174 4 p. 8646306. (2019 1st International Symposium on Instrumentation, Control, Artificial Intelligence, and Robotics, ICA-SYMP 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

control systems design
Gears
Systems analysis
Control systems
torque

Design and Realization of a Novel Elastomer Characterization System for Precision Positioning Application

Lin, P. C., Cheng, Y. F. & Chen, K-S., 2019 Jan 23, Proceedings of the 2018 18th International Conference on Mechatronics - Mechatronika, ME 2018. Maga, D., Stefek, A. & Brezina, T. (eds.). Institute of Electrical and Electronics Engineers Inc., 8624672. (Proceedings of the 2018 18th International Conference on Mechatronics - Mechatronika, ME 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Elastomers
Precision engineering
Rubber
Stiffness

DIC image on FIB ring-core analysis of depth sensing residual stress measurement of thin films

Pan, W. C., Tsai, A. T., Cheng, F. Y., Chen, T. Y-F. & Lin, M. T., 2019 Jan 1, Advancement of Optical Methods and DigitalImage Correlation in Experimental Mechanics - Proceedings of the 2018 Annual Conference on Experimentaland Applied Mechanics. Sutton, M. A., Lin, M-T., Reu, P. L., Furlong, C., Lamberti, L. & Sciammarella, C. (eds.). Springer New York LLC, p. 109-111 3 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Core analysis
Stress measurement
Focused ion beams
Residual stresses
Thin films

Effects of substrate structure on the warpage of flip chip IC packages

Lee, Y. S., Lin, P. Y., Wu, K. T., Lee, H-H. & Hwang, S-J., 2019 Jan 24, 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018. IEEE Computer Society, p. 66-70 5 p. 8625738. (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Substrates
Thermal effects
Thermal expansion
Electromagnetic compatibility
Encapsulation

Fatigue crack growth on the interface of copper and epoxy molding compound under mixed-mode loading

Chen, Y. J., Deng, Y. A. & Chiu, T-C., 2019 Jan 24, 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018. IEEE Computer Society, p. 139-142 4 p. 8625759. (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sheet molding compounds
Fatigue crack propagation
Fatigue of materials
Copper
Cracks

Finite Element Input Shaping Design for Vibration Suppression of Mechatronics Systems

Chen, W., Chen, K-S. & Tsai, M-C., 2019 May 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 37-42 6 p. 8722868. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration Suppression
Mechatronics
Finite Element
Motion
Finite Element Simulation
1 Citation (Scopus)

Investigation on the P-V-T-C property characterization and its importance on IC encapsulation material application

Wang, C. C., Huang, C. T., Hsu, C. C., Chang, R. Y., Huang, R., Huang, M. F. & Hwang, S-J., 2019 Feb 6, Proceedings of PPS-34: 34th International Conference of the Polymer Processing Society - Conference Papers. Liu, S-J. (ed.). American Institute of Physics Inc., 020006. (AIP Conference Proceedings; vol. 2065).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

warpage
shrinkage
industries
plungers
trends

Leaderless Consensus for Multiple Euler-Lagrange Systems with Event-Triggered Communication

Liu, Y-C., 2019 Jan 16, Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 2657-2662 6 p. 8616450. (Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Communication
Multi agent systems
Telecommunication networks
Damping
Topology

Object Transportation Using Networked Mobile Manipulators without Force/Torque Sensors

Ngo, V. T. & Liu, Y-C., 2019 Jan 9, 2018 International Automatic Control Conference, CACS 2018. Institute of Electrical and Electronics Engineers Inc., 8606770. (2018 International Automatic Control Conference, CACS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile Manipulator
Manipulators
Torque
Wavelet Neural Network
Sensor

Object Transportation Using Networked Mobile Manipulators without Force/Torque-Sensors

Ngo, V. T. & Liu, Y-C., 2019 Jan 9, 2018 International Automatic Control Conference, CACS 2018. Institute of Electrical and Electronics Engineers Inc., 8606732. (2018 International Automatic Control Conference, CACS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile Manipulator
Manipulators
Torque
Wavelet Neural Network
Sensor

Observation of fiber orientation in injection molded long-fiber reinforced composites

Aditya, R., Hwang, S-J. & Lee, H-H., 2019 Feb 6, Proceedings of PPS-34: 34th International Conference of the Polymer Processing Society - Conference Papers. Liu, S-J. (ed.). American Institute of Physics Inc., 030029. (AIP Conference Proceedings; vol. 2065).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fiber orientation
injection
composite materials
fibers
glass fibers

Study on the influences on fiber micro-structure variations and the connection to final shrinkage/warpage on long fiber reinforced thermoplastics (FRT) parts

Huang, C. T., Hsu, C., Yeh, C. E., Chen, Y. S., Hwang, S-J., Peng, H. S., Wu, C. C. & Tu, C. I., 2019 Feb 6, Proceedings of PPS-34: 34th International Conference of the Polymer Processing Society - Conference Papers. Liu, S-J. (ed.). American Institute of Physics Inc., 030023. (AIP Conference Proceedings; vol. 2065).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

warpage
shrinkage
microstructure
fibers
fiber orientation

Temporal focusing-based multiphoton excitation fluorescence images with background noise cancellation via Hilbert-Huang transform

Yuling Hu, Y., Luo, Y. R., Lin, C. Y., Chang, C-Y. & Chen, S. J., 2019 Jan 1, Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XXVI. Wilson, T. & Brown, T. G. (eds.). SPIE, 108831C. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10883).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

background noise
Lighting
cancellation
Lenses
Noise

Thermo-mechanical process emulation and sensitivity analysis of wafer warpage after reconstitution in fan-out packaging

Yang, C. Y., Chen, K-S., Yang, T-S., Chiu, T-C. & Ho, C-J., 2019 Apr 1, 2019 International Conference on Electronics Packaging, ICEP 2019. Institute of Electrical and Electronics Engineers Inc., p. 355-360 6 p. 8733604. (2019 International Conference on Electronics Packaging, ICEP 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fans
Sensitivity analysis
Packaging
Processing
Sheet molding compounds
2018

3D structure line start synchronous reluctance motor design based on selective laser melting of 3D printing

Huang, P., Tsai, M-C. & Jiang, I., 2018 Oct 24, 2018 IEEE International Magnetic Conference, INTERMAG 2018. Institute of Electrical and Electronics Engineers Inc., 8508376. (2018 IEEE International Magnetic Conference, INTERMAG 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

reluctance
Reluctance motors
Synchronous motors
printing
Printing

A new heat transfer simulation model for selective laser melting to estimate the geometry of cross section of melt pool

Tran, H. C. & Lo, Y-L., 2018 Jan 1, Mechanics of Additive and Advanced Manufacturing - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Huskins-Retzlaff, E., Brown, E., Antoun, B., Thakre, P. R., Chasiotis, I., Kramer, S., Chen, W. & Wang, J. (eds.). Springer New York LLC, p. 13-16 4 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Melting
Heat transfer
Geometry
Lasers
Powder metals

A new technique for creating curved interior holes on ultrathin glass based on picosecond laser drilling and thermo-shock separation

Chuang, C. F. & Chen, K-S., 2018 Jun 22, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018. Marcelli, R., Mita, Y., Smith, S., Pressecq, F., Nouet, P., Mailly, F. & Schneider, P. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 1-5 5 p. (Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser drilling
Drilling
shock
Glass
Lasers

A Novel Measurement for Monitoring Mechanical Impedance Applied to Breakthrough Detection of Bone-Drill System

Ko, P. J. & Tsai, M-C., 2018 Nov 16, 2017 5th International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2017. Institute of Electrical and Electronics Engineers Inc., p. 133-137 5 p. 8540168. (2017 5th International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bone
Monitoring
DC motors
Drilling
Mathematical transformations

Apply forced dynamic control and state feedback mechanism for motor position control

Wu, J. R., Hsu, C. C., Chen, C. L. & Tsai, M-C., 2018 Feb 7, 2017 International Automatic Control Conference, CACS 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-10 10 p. (2017 International Automatic Control Conference, CACS 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motor Control
Position Control
Dynamic Control
Position control
Feedforward
1 Citation (Scopus)

A soft robotic gripper module with 3d printed compliant fingers for grasping fruits

Liu, C-H., Chiu, C. H., Chen, T. L., Pai, T. Y., Chen, Y. & Hsu, M. C., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 736-741 6 p. 8452420. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grippers
Fruits
Robotics
Linear actuators
Shape optimization

Autonomous guided robotic systems in regulating indoor environmental quality

Wu, W. Y. & Liu, Y-C., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 188-193 6 p. 8452331. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Robots
Air cleaners
Sensors
Collision avoidance

Bi-object Energy Consumption Minimization Strategy for HEVs

Huang, Y. H., Tsai, N-C., Chiu, H. L., Chen, Y. C. & Kuo, C. C., 2018 Aug 21, 2018 5th International Conference on Electric Power and Energy Conversion Systems, EPECS 2018. Institute of Electrical and Electronics Engineers Inc., 8443492. (2018 5th International Conference on Electric Power and Energy Conversion Systems, EPECS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy Consumption
Energy utilization
Simulink
Simulators
Simulator

Calibration of multi-focal planes for zoom-lens unit

Huang, J. C., Liu, C-S. & Huang, Y. C., 2018 Feb 27, 2017 11th International Conference on Sensing Technology, ICST 2017. IEEE Computer Society, p. 1-5 5 p. 8304441. (Proceedings of the International Conference on Sensing Technology, ICST; vol. 2017-December).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Calibration
Scanning

Computerized Fragment Reduction and Evaluation for Distal Femur Fractures

Hsiao, Y-C. & Fang, J-J., 2018 Aug 30, Basic & Clinical Pharmacology & Toxicology: 2018 IERI International Conference on Medical Physics, Medical Engineering and Informatics. S3 ed. Vol. 123.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damping Enhancement and Positioning Control of Compliant Stages by Incorporating Rubber Shear Dampers

Yula, Y. H., Lee, K. H., Chen, K-S. & Liu, Y. H., 2018 Oct 15, 2018 57th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2018. Institute of Electrical and Electronics Engineers Inc., p. 533-538 6 p. 8492683

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damper
dampers
Rubber
rubber
positioning

Design and hardware realization of wheel-shaped object labeling and quality inspection system

Chao, C. H. & Liu, Y-C., 2018 Feb 20, 2017 International Conference on Advanced Robotics and Intelligent Systems, ARIS 2017. Institute of Electrical and Electronics Engineers Inc., 8297192. (International Conference on Advanced Robotics and Intelligent Systems, ARIS; vol. 2017-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Labeling
Wheels
Inspection
Hardware
Graphical user interfaces
4 Citations (Scopus)

Design and prototype of monolithic compliant grippers for adaptive grasping

Liu, C-H. & Chiu, C. H., 2018 Jun 8, 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018. Institute of Electrical and Electronics Engineers Inc., p. 51-55 5 p. (2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grippers
Rubber
Linear actuators
Robotics
Topology
1 Citation (Scopus)

Design of a lightweight forearm exoskeleton for fine-motion rehabilitation

Su, Y. Y., Wu, K. Y., Lin, C. H., Yu, Y. L. & Lan, C-C., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 438-443 6 p. 8452243. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patient rehabilitation
Robots
Actuators
Torque
Exoskeleton (Robotics)

Development of consistent interconversions between linear viscoelastic functions for multiaxial viscoelastic models

Chen, D. L., Chiu, T-C., Lee, S. H., Sung, P. H., Shih, M. K., Tarng, D. & Hung, C. P., 2018 Jan 12, IMPACT 2017 - 12th International Microsystems, Packaging, Assembly and Circuits Technology Conference, Proceedings. IEEE Computer Society, p. 282-285 4 p. (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; vol. 2017-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Packaging materials
Mathematical models

Development of dual Wiimote-based 3D localization schemes for mobile robot and quadcopter integration

Zhan, H. Y., Li, T. H., Cheng, C. H., Kuo, S. H. & Chen, K-S., 2018 Jan 1, Mechatronics 2017 - Recent Technological and Scientific Advances. Brezina, T. & Jablonski, R. (eds.). Springer Verlag, p. 644-652 9 p. (Advances in Intelligent Systems and Computing; vol. 644).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile robots
Demonstrations
Stereo vision
Animation
Wheels

Dual Cooperative Drive Circuit for Active Magnetic Bearings

Chiu, H. L., Tsai, N-C. & Chen, Y. K., 2018 Oct 19, 2018 23rd International Conference on Applied Electronics, AE 2018. IEEE Computer Society, 8501436. (International Conference on Applied Electronics; vol. 2018-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic bearings
Rotors
Networks (circuits)
Pulse width modulation
Computer simulation

Dynamic Deformation Behaviour and Dislocation Substructure of AZ80 Magnesium Alloy over a Wide Range of Temperatures

Lee, W-S. & Chou, C. W., 2018 Sep 7, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. Cosculluela, A., Cadoni, E., Buzaud, E. & Couque, H. (eds.). EDP Sciences, 03010. (EPJ Web of Conferences; vol. 183).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

magnesium alloys
substructures
strain rate
temperature
work hardening

Effective control for wireless sensor and mobile actuator network in regulation of environmental density function

Lin, M. T. & Liu, Y-C., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1190-1195 6 p. 8452364. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Probability density function
Actuators
Mobile robots
Sensors
Robots

Experimental studies of composite shrinkage of dental restorations

Chuang, S-F., Huang, P. S., Chen, T. Y-F., Huang, L. H., Su, K. C. & Chang, C-H., 2018 Jan 1, 6th International Conference on the Development of Biomedical Engineering in Vietnam, BME6. Vo Van, T., Nguyen Le, T. A. & Nguyen Duc, T. (eds.). Springer Verlag, p. 65-68 4 p. (IFMBE Proceedings; vol. 63).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Restoration
Composite materials
Curing
Dental composites
Debonding

Hardware Design and Realization of Wheel-Shaped Object Labeling and Quality Inspection System

Chao, C. H. & Liu, Y-C., 2018 Nov 1, 2018 International Conference on System Science and Engineering, ICSSE 2018. Institute of Electrical and Electronics Engineers Inc., 8520042. (2018 International Conference on System Science and Engineering, ICSSE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hardware Design
Wheel
Labeling
Inspection
Wheels

High content Nd-Fe-B in polymer composite by fused depo-sition Modeling

Chang, T., Jyun, J. K., Lee, W., Tsai, M-C. & Cheng, C., 2018 Oct 24, 2018 IEEE International Magnetic Conference, INTERMAG 2018. Institute of Electrical and Electronics Engineers Inc., 8508341. (2018 IEEE International Magnetic Conference, INTERMAG 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnets
Polymers
magnets
Magnetic devices
Extrusion molding
1 Citation (Scopus)

Identification of curing kinetics of epoxy molding compounds and mold flow analysis for assessment of die-shift defects

Hsiao, C. L., Yang, C. Y., Chen, H. C., Yang, T-S., Chen, K-S., Wu, T. H., Wang, Y. C. & Lee, S., 2018 Jan 12, IMPACT 2017 - 12th International Microsystems, Packaging, Assembly and Circuits Technology Conference, Proceedings. IEEE Computer Society, p. 42-45 4 p. (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; vol. 2017-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sheet molding compounds
Curing
Defects
Kinetics
Molding

Integrated Design of Magnetic Gear and Electric Motor for Electric Vehicles

Tsai, M-C., Wu, Y. C., Chan, C. T., Cai, P. Y., Huang, P. W. & Tsai, M. H., 2018 Oct 2, 2016 International Conference of Asian Union of Magnetics Societies, ICAUMS 2016. Institute of Electrical and Electronics Engineers Inc., 8479780. (2016 International Conference of Asian Union of Magnetics Societies, ICAUMS 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electric motors
Electric motors
Electric vehicles
Gears
vehicles

Mechanical Properties Characterizations of Elastomer Pads and Control of a 3-DOF Rubber-Bearing Stage

Chen, Y. C., Chen, C. A., Chen, K-S. & Liu, Y. H., 2018 Oct 15, 2018 57th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2018. Institute of Electrical and Electronics Engineers Inc., p. 539-544 6 p. 8492707. (2018 57th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bearing pads
Elastomers
Rubber
elastomers

Model Reference Impedance Control of Power-Assisted Bike

Wang, C. C., Chen, C. L. & Tsai, M-C., 2018 Nov 27, ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems. Institute of Electrical and Electronics Engineers Inc., p. 2781-2784 4 p. 8549272. (ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque
Electric motors
Power transmission
Gears
Friction

Non-invasive glucose monitoring based on optical coherence tomography

Chen, T. L., Lo, Y-L. & Phan, Q. H., 2018 Jan 1, Biomedical Imaging and Sensing Conference. Yatagai, T., Aizu, Y., Matoba, O., Awatsuji, Y. & Luo, Y. (eds.). SPIE, Vol. 10711. 1071112

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical Coherence Tomography
Optical tomography
Glucose
glucose
tomography

Optimal design of an elastomeric engine mount with desired stiffness using topology optimization

Liu, C-H., Chiang, Y. P. & Hsu, Y. Y., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-July. p. 1003-1008 6 p. 8452442

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape optimization
Stiffness
Engines
Elastomers
Optimal design

Performance analysis of the automata in a blossoming flower clock in the 18th century

Chen, Y. H., Ceccarelli, M. & Yan, H-S., 2018 Jan 1, Advances in Service and Industrial Robotics - Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer Netherlands, p. 1017-1024 8 p. (Mechanisms and Machine Science; vol. 49).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clocks
Museums
Dynamic analysis
Kinematics

Physical aging of epoxy molding compound and its influences on the warpage of reconstituted wafer

Chiu, T-C., Yin, W. J., Yeh, E. Y., Yang, Y. T., Chen, D. L. & Tseng, Y. H., 2018 Aug 7, Proceedings - IEEE 68th Electronic Components and Technology Conference, ECTC 2018. Institute of Electrical and Electronics Engineers Inc., p. 1848-1855 8 p. 8429790. (Proceedings - Electronic Components and Technology Conference; vol. 2018-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sheet molding compounds
Aging of materials
Creep
Experiments
Constitutive models

Probabilistic reasoning in diagnostic expert system for smart homes

Vechet, S., Krejsa, J., Hrbacek, J. & Chen, K-S., 2018 Jan 1, Mechatronics 2017 - Recent Technological and Scientific Advances. Brezina, T. & Jablonski, R. (eds.). Springer Verlag, p. 708-715 8 p. (Advances in Intelligent Systems and Computing; vol. 644).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Expert systems
Mobile robots
Uncertainty

Rapid and highly integrated FPGA-based Shack-Hartmann wavefront sensor for adaptive optics system

Chen, Y. P., Chang, C-Y. & Chen, S. J., 2018 Jan 1, Adaptive Optics and Wavefront Control for Biological Systems IV. Kubby, J., Gigan, S. & Bifano, T. G. (eds.). SPIE, 1050203. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10502).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

field-programmable gate arrays
Adaptive optics
Computer Systems
Wavefronts
adaptive optics

Research of Axial-Radial Flux Permanent Magnet Integrated Starter/Generator Based on Dual Air-Gap Design

Tsai, M. K., Huang, P. W. & Tsai, M-C., 2018 Nov 27, ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems. Institute of Electrical and Electronics Engineers Inc., p. 261-264 4 p. 8549432. (ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Starters
Permanent magnets
Fluxes
Air
Hybrid vehicles

The best and worst feed directions in milling chatter

Wang, J. J., 2018 Jan 1, Processes. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modal analysis
Frequency response
Transfer functions

The sensing technology of applying the acoustic emission sensor to the grinding wheel loading phenomenon

Liu, C-S. & Li, Y. A., 2018 Aug 27, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. Institute of Electrical and Electronics Engineers Inc., 8449149. (2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustic Emission
Grinding wheels
Grinding
acoustic emission
grinding