Department of Mechanical Engineering

Research Output 1978 2020

Filter
Paper
2019

Influence of equivalence ratio on flame acceleration and detonation transition of ethylene/oxygen mixture in a narrow channel

Chan, H. P., Su, W. Y., Tseng, Y. C. & Wu, M-H., 2019 Jan 1.

Research output: Contribution to conferencePaper

Detonation
detonation
equivalence
flames
Ethylene

Investigation on the microstructures of long fiber and their influences on warpage and mechanical property in injection reinforced thermoplastics (FRT) parts

Huang, C. T. C. T., Hsu, C., Hwang, S. J., Peng, H. S., Wu, C. C. & Tu, C. I., 2019 Jan 1.

Research output: Contribution to conferencePaper

Thermoplastics
Mechanical properties
Microstructure
Fibers
Tensile strength

Micro-explosion of emulsified fuel droplet and its combustion characteristics in a boiler

Hsuan, C. Y., Hou, S. S., Wang, Y. L. & Lin, T-H., 2019 Jan 1.

Research output: Contribution to conferencePaper

Fuel Oils
fuel oils
Residual fuels
boilers
Fuel oils

Properties and electrolytic decomposition characteristics of han aqueous solutions

Yang, H. O., You, C. W., Chin, J. K. & Wu, M-H., 2019 Jan 1.

Research output: Contribution to conferencePaper

aqueous solutions
Decomposition
decomposition
conductivity
electrolysis

Simulation of co-gasification of sewage sludge and PKS in ASPEN PLUS: Effects of reactor temperature and steam to biomass ratio

Lin, S. P., Wu, F. H., Chen, G. B. & Lin, T. H., 2019 Jan 1.

Research output: Contribution to conferencePaper

sewage
sludge
gasification
Steam
Sewage sludge

Study of the effect of process parameters on fiber length, fiber orientation and tensile strength of long glass fiber reinforced polypropylene molding

Huang, P. W., Peng, H. S., Hwang, S. J., Huang, C. T., Chen, P. C., Ke, Y. Y., Pan, P. S., Wu, C. C. & Tu, C. I., 2019 Jan 1.

Research output: Contribution to conferencePaper

Polypropylenes
Fiber reinforced materials
Molding
Glass fibers
Tensile strength

Two successive drops impinging onto a hydrophobic plate

Chen, C. K., Verma, D. & Lin, T. H., 2019 Jan 1.

Research output: Contribution to conferencePaper

impingement
falling
solid surfaces
intervals
Water
2018

Development of vehicle collision avoidance system based on impedance control approach

Chen, C. L., Tsai, M. C., Wang, K. L., Hu, J. S. & Liu, Y. C., 2018 Jan 1.

Research output: Contribution to conferencePaper

Collision avoidance
Braking
Feedback
Hardware
Testing

Effects of processing parameters on fiber length distribution and tensile strength of long glass fiber reinforced Nylon66 composites molded parts

Huang, P. W., Peng, H. S., Hwang, S. J., Huang, C. T., Wu, C. C. & Tu, C. I., 2018 Jan 1.

Research output: Contribution to conferencePaper

Glass fibers
Tensile strength
Fibers
Composite materials
Processing
Biopsy
Needles
Fracture toughness

Geometrical effects on fiber micro-structure variations and the influences on long Fiber Reinforced Thermoplastics (FRT) parts

Huang, C. T., Hsu, C., Chen, Y. S., Hwang, S. J., Peng, H. S., Wu, C. C. & Tu, C. I., 2018 Jan 1.

Research output: Contribution to conferencePaper

Thermoplastics
Microstructure
Fibers
Plastics
Fiber reinforced materials
2017

Analysis and validations of optical image stabilization actuator for cellphone camera modules

Hsieh, C. L., Wang, H. Y., Chang, Y. H. & Liu, C-S., 2017 Jan 1.

Research output: Contribution to conferencePaper

modules
stabilization
actuators
cameras
launching

Combustion behavior of partial substitution of solid fossil fuel by biomass

Hou, S. S., Huang, W. C. & Lin, T-H., 2017 Jan 1.

Research output: Contribution to conferencePaper

fossil fuels
Coal
biomass
Fossil fuels
coal
1 Citation (Scopus)

Experimental study on velocity deficits of near-limit detonation waves initiated in narrow channels

Xiong, Y., Chan, H. P., Wu, M-H., Qin, J. & Chen, C. F., 2017 Jan 1.

Research output: Contribution to conferencePaper

detonation waves
Detonation
detonation
deflagration
equivalence

Thermogravimetric analysis of sludge pyrolysis oil mixed with heavy fuel oil

Chatelier, S., Kuan, Y. H., Chen, G. B., Lin, H. T. & Lin, T. H., 2017 Jan 1.

Research output: Contribution to conferencePaper

Fuel Oils
fuel oils
Residual fuels
sludge
Fuel oils

The study of fire resistance of building integrated photovoltaics

Yang, M. T., Liou, Y. L., Chen, C. K., Lee, H. K., Lin, T. H., Tsai, C. F., Lei, M. Y. & Wang, T. C., 2017 Jan 1.

Research output: Contribution to conferencePaper

flammability
Fire resistance
Fires
modules
Calcium Sulfate
2015

Assembly and reaction characterization of a novel Al/CuO nanothermite shell on a copper wire

Chiang, Y. C. & Wu, M-H., 2015 Jan 1.

Research output: Contribution to conferencePaper

Copper
Wire

Augmented reality in peg-in-hole microassembly operations

Chang, R-J. & Jau, J. C., 2015 Oct 18.

Research output: Contribution to conferencePaper

Augmented reality
Virtual reality
Computer aided design

Charaterization of pressure evolutions during flame acceleration and ddt in a thin channel

Chen, Z. E. & Wu, M-H., 2015 Jan 1.

Research output: Contribution to conferencePaper

Synthesis of carbon nano-materials in methane-ethylene jet diffusion flames modulated by acoustic excitation

Sari, S. K., Hu, W. C., Hou, S. S. & Lin, T-H., 2015 Jan 1.

Research output: Contribution to conferencePaper

Methane
Carbon
Acoustics
ethylene
2014

3-D numerical heat transfer for confined turbulent twin circular jets impinging on an inclined moving plate

Jang, J-Y. & Huang, J. C., 2014 Jan 1.

Research output: Contribution to conferencePaper

Nusselt number
Heat transfer
Water
2013

Combustion synthesis of carbon nanostructures by liquid-fuel flames in a stagnation-point flow

Hu, W. C., Hou, S. S. & Lin, T. H., 2013 Jan 1.

Research output: Contribution to conferencePaper

Combustion synthesis
Liquid fuels
Nanostructures
Carbon
Oxygen

Design a free-space fiber coil gyroscope using Mueller matrix

Lo, Y. L., Yen, C. C., Chung, Y. F., Lin, H. H. & Liu, R. Y., 2013 May 27, p. 105-107. 3 p.

Research output: Contribution to conferencePaper

Gyroscopes
Fibers
Polarization
Fiber optics

Laser cleaning of carbonaceous deposits on combustion engine components

Guan, Y., Liu, C-H., Lim, G. C., Hong, M. & Zheng, H., 2013 Dec 1, p. 436-442. 7 p.

Research output: Contribution to conferencePaper

Cleaning
Deposits
Engines
Lasers
Steel

Numerical study on oxy-co-firing of pulverized coal and rice straw in a 300kW research furnace

Lin, P. S., Chen, Z. E. & Wu, M. H., 2013 Jan 1.

Research output: Contribution to conferencePaper

Straw
Furnaces
Coal
Flow simulation
Chemical analysis

Thermal and electrical performance of a PV module integrated with microencapsulated phase change material

Ho, C-J., Tanuwijaya, A. O. & Lai, C., 2013 Jan 1.

Research output: Contribution to conferencePaper

Phase change materials
Facades
Temperature control
Melting point
Aspect ratio
Nanocapsules
Suspensions
Water
Heat sinks
Urea formaldehyde resins

Visualization of shock and reaction fronts during flame acceleration and transition to detonation in a small channel

Chiu, P. Y., Cheng, C. H., Chen, Z. E. & Wu, M-H., 2013 Jan 1.

Research output: Contribution to conferencePaper

Detonation
Visualization
Surges (fluid)
Explosions
Ethylene
2012
1 Citation (Scopus)

Effects of compression distribution on PEMFC stacks using reformate as fuel

Huang, K. J., Chen, C. Y., Hwang, S. J. & Lai, W. H., 2012 Jan 1, p. 234-243. 10 p.

Research output: Contribution to conferencePaper

Diffusion in gases
Proton exchange membrane fuel cells (PEMFC)
Pressure distribution
Compaction
Fuel cells
2011

Analyzing thermo-electro-mechanical response of active composites

Lin, C. & Muliana, A., 2011 Dec 1.

Research output: Contribution to conferencePaper

Composite materials
Micromechanics
Ferroelectric materials
Boundary conditions
Temperature
2009

Effects of water injection on nitric oxide emission of a single cylinder port injection spark ignition gasoline engine

Li, J. L., Wu, M-H., Chen, R. H., Lin, T-H. & Wang, J. K., 2009 Jan 1.

Research output: Contribution to conferencePaper

water injection
spark ignition
gasoline
Water injection
Nitric oxide
deflagration
Detonation
detonation
flames
Oxygen

Impingement of a gas-in-liquid compound drop on a heated flat plate

Chang, K. N., Chen, R. H., Pu, J. Y. & Lin, T-H., 2009 Jan 1.

Research output: Contribution to conferencePaper

impingement
flat plates
Gases
Liquids
liquids

Modeling of variance for machine tool positioning errors

Liao, Y. Y., Wang, J. J., Hsu, F. C., Lyu, Y. T. & Melkote, S. N., 2009 Dec 1, p. 309-312. 4 p.

Research output: Contribution to conferencePaper

Machine tools
Lasers
Measurement errors
Kinematics

One-dimensional completely-prevaporized compound-drops spray flames

Hsuan, C. Y., Hou, S. S. & Lin, T-H., 2009 Jan 1.

Research output: Contribution to conferencePaper

sprayers
flames
Heat losses
Water
heat
46 Citations (Scopus)

Reconfiguration principles and strategies for reconfigurable mechanisms

Kuo, C. H., Dai, J. S. & Yan, H-S., 2009 Nov 12, p. 1-7. 7 p.

Research output: Contribution to conferencePaper

Topology
14 Citations (Scopus)

Structural analysis and configuration synthesis of mechanisms with variable topologies

Yan, H-S. & Kuo, C. H., 2009 Nov 12, p. 23-31. 9 p.

Research output: Contribution to conferencePaper

Structural analysis
Kinematics
Topology

The effect of inert dilution on flickering motions of jet diffusion flames

Hu, C. W., Chen, C. H., Hou, S. S. & Lin, T-H., 2009 Jan 1.

Research output: Contribution to conferencePaper

Flickering
diffusion flames
Dilution
dilution
low speed
2008
3 Citations (Scopus)

Design and hand-eye coordination of a humanoid robot

Tsay, J. T-I. & Lai, C. H., 2008 Dec 1, p. 124-129. 6 p.

Research output: Contribution to conferencePaper

End effectors
Robots
Self organizing maps
Neural networks
Binoculars
10 Citations (Scopus)

Effect of thickness to grain size ratio on drawability for micro deep drawing of AISI 304 stainless steel

Lee, R-S., Chen, C. H. & Gau, J. T., 2008 Jan 1, p. 183-188. 6 p.

Research output: Contribution to conferencePaper

Deep drawing
Stainless Steel
Stainless steel
Metal foil
Formability
4 Citations (Scopus)

Viscoelastic characterization of soft micropillars for cellular mechanics study

Lin, I. K., Liao, Y. M., Chen, K-S. & Zhang, X., 2008 Jan 1, p. 278-280. 3 p.

Research output: Contribution to conferencePaper

Polydimethylsiloxane
Mechanics
Viscoelasticity
Dynamic mechanical analysis
Compaction
2007

Full-scale analysis on fire characteristics of a furnished office room

Chen, K. J., Su, H. C., Wu, C. W., Pu, J. Y., Lin, T-H., Lai, C., Tsai, M. J. & Chen, C. J., 2007 Dec 1.

Research output: Contribution to conferencePaper

Fires
Flashover
Flammable materials
Ignition
Heat flux

Numerical and experimental studies of flow field and heat transfer for high temperature exhaust gas over in-line tube banks

Liu, C. E., Jang, J-Y., Huang, T. S., Wang, P. H. & Chen, C. D., 2007 Dec 1.

Research output: Contribution to conferencePaper

Exhaust gases
Flow fields
Nusselt number
Heat transfer
Recuperators

PEM fuel cell channel width optimization by integrating computational fluid dynamics code with optimization method

Jang, J-Y., Cheng, C-H., Hwang, Y. S. & Wu, Y. M., 2007 Dec 1.

Research output: Contribution to conferencePaper

Proton exchange membrane fuel cells (PEMFC)
Computational fluid dynamics
Conjugate gradient method
Proton transfer
Navier Stokes equations
2006

A new friction model based on a hypothetical friction mechanism

Hsieh, C., Chen, Y. F. & Lee, S. Y., 2006 Dec 1, p. 182-187. 6 p.

Research output: Contribution to conferencePaper

Friction
Model-based
Model
Mechanical Systems
Experiment
3 Citations (Scopus)

Experimental investigation of infrared rapid surface heating for injection molding

Chang, P. C. & Hwang, S-J., 2006 Jul 10, p. 1285-1289. 5 p.

Research output: Contribution to conferencePaper

Injection molding
Infrared radiation
Heating
Costs
Temperature

Formation of gas-in-liquid compound drops

Lin, S. Y., Chiu, S. L., Chen, R. H., Pu, J. Y. & Lin, T-H., 2006 Dec 1.

Research output: Contribution to conferencePaper

Gases
Liquids
Needles
Nozzles
Satellites

Influence of water sprays and heat loss on propane/air flames propagating in a stagnation-point flow

Hou, S. S. & Lin, T-H., 2006 Dec 1.

Research output: Contribution to conferencePaper

Propane
Heat losses
Water
Air
Liquids
5 Citations (Scopus)

True 3D numerical simulation for micro injection molding

Yang, W. H., Chang, D., Yang, V., Chang, P. C. & Hwang, S-J., 2006 Jul 10, p. 1270-1274. 5 p.

Research output: Contribution to conferencePaper

Injection molding
Molding
Microstructure
Computer simulation
Experiments
2005
5 Citations (Scopus)

An analytical method for design of compliant grippers with macro/micro manipulation and assembly applications

Lan, C. C. & Lee, K. M., 2005 Nov 16, p. 1023-1028. 6 p.

Research output: Contribution to conferencePaper

Grippers
Macros
Constrained optimization
Finite element method
Fabrication