Department of Mechanical Engineering

Research Output 1978 2020

Filter
Paper
1982

EFFECTS OF BOUNDARY CONDITIONS ON THE VIBRATION OF TRANSVERSE ISOTROPIC THICK PLATES.

Chen, L-W., Doong, J. L. & Ye, T. Y., 1982 Dec 1, p. 319-325. 7 p.

Research output: Contribution to conferencePaper

Boundary conditions
Natural frequencies
1983
3 Citations (Scopus)

BUCKLING OF A BIMODULUS COMPOSITE THICK PLATE.

Chen, L. W. & Doong, J. L., 1983 Dec 1, p. 195-200. 6 p.

Research output: Contribution to conferencePaper

Buckling
Composite materials
5 Citations (Scopus)

CREATIVE DESIGN OF A WHEEL DAMPING MECHANISM.

Yan, H. S. & Chen, J. J., 1983 Dec 1.

Research output: Contribution to conferencePaper

EFFECTS OF FREE CONVECTION AND MASS TRANSFER ON THE STOKES' SECOND PROBLEM FOR AN INFINITE VERTICAL PLATE.

Wu, C-Y., Chen, C. K. & Lien, F. S., 1983 Dec 1. 1 p.

Research output: Contribution to conferencePaper

Natural convection
Mass transfer

LAMINAR FILM CONDENSATION ON A DOWNWARD VERTICAL FIN.

Chen, C. K., Chen, H-T. & Cleaver, J. W., 1983 Dec 1, p. 130-131. 2 p.

Research output: Contribution to conferencePaper

Condensation

PHASE-CHANGE HEAT TRANSFER IN RECTANGULAR CAVITIES.

Viskanta, R., Ho, C. J. & Gau, C., 1983 Dec 1, p. B. 5.

Research output: Contribution to conferencePaper

1984
3 Citations (Scopus)

GENERALIZATION OF PLANAR MECHANICAL DEVICES.

Yan, H. S. & Hsu, C. H., 1984 Dec 1, p. 341-346. 6 p.

Research output: Contribution to conferencePaper

1985

ATLAS OF BASIC RIGID CHAINS.

Yan, H. S. & Hwang, W. M., 1985 Dec 1.

Research output: Contribution to conferencePaper

Degrees of freedom (mechanics)
Kinematics
1986
3 Citations (Scopus)

SOME EXPERIENCES IN IMPLEMENTING A KNOWLEDGE-BASED CONSULTANT FOR OPTIMUM STRUCTURAL SYNTHESIS.

Hajela, P. & Chen, J. L., 1986 Jan 1, p. 221-226. 6 p.

Research output: Contribution to conferencePaper

Expert systems
Mesh generation
Boundary conditions
Specifications
Monitoring
1987

COMBINED FORCED AND FREE CONVECTIVE FLOWS OF COLD WATER OVER A VERTICAL FLAT SURFACE.

Jang, J-Y. & Chen, M. H., 1987 Jan 1, p. 85-89. 5 p.

Research output: Contribution to conferencePaper

Nusselt number
Finite difference method
Freezing
Ice
Water

COMPUTER-AIDED DESIGN AND MANUFACTURING OF CURVED SHAPES.

Lai, S. H-Y., 1987 Jan 1, p. 183-188. 6 p.

Research output: Contribution to conferencePaper

Computer aided manufacturing
Computer aided design
Milling machines
Splines
Specifications

DISCRETE REPRESENTATION OF NONLINEAR PROCESSES USING TIME SERIES DATA.

Lai, S. H-Y. & Hsieh, S. H., 1987 Dec 1, p. 43-49. 7 p.

Research output: Contribution to conferencePaper

Time series
Pattern recognition
Dynamical systems

FINITE ELEMENT SOLUTIONS OF THE POSTBUCKLING BEHAVIOR OF A THICK PLATE.

Chen, L. W. & Lin, C. C., 1987 Jan 1, p. 423-428. 6 p.

Research output: Contribution to conferencePaper

Shear deformation
Mindlin plates
Buckling
Differential equations
Finite element method
1 Citation (Scopus)

NONLINEAR ADAPTIVE MODELING FOR MACHINING CHATTER IDENTIFICATION AND MONITORING.

Lai, S. H-Y., 1987 Dec 1, p. 181-187. 7 p.

Research output: Contribution to conferencePaper

Machine tools
Machining
Monitoring
Control charts

NONLINEAR DATA DEPENDENT SYSTEM FOR NONLINEAR RANDOM VIBRATION.

Lai, H. Y. & Hsieh, S. H., 1987 Jan 1, p. 375-381. 7 p.

Research output: Contribution to conferencePaper

Computational methods
Systems engineering
Parameter estimation
Pattern recognition
Time series
1 Citation (Scopus)

RULE BASED APPROACH TO OPTIMUM DESIGN MODELING.

Chen, J. L. & Hajela, P., 1987 Jan 1, p. 66-81. 16 p.

Research output: Contribution to conferencePaper

Expert systems
Structural design
Optimum design

STATISTICAL MODELING FOR CAD/CAM APPLICATIONS.

Lai, S. H-Y., 1987 Dec 1, p. 3-10. 8 p.

Research output: Contribution to conferencePaper

Computer aided manufacturing
Computer aided design
Computer simulation
Process monitoring
Machine tools

THRESHOLD ADAPTIVE MODELING FOR DRILLING PROCESS IDENTIFICATION AND MONITORING.

Lai, H. Y. & Hsieh, S. H., 1987 Dec 1, p. 89-94. 6 p.

Research output: Contribution to conferencePaper

Drilling
Monitoring
Vibrations (mechanical)
Machining
Wear of materials
1 Citation (Scopus)

THRESHOLD MODELING OF NONLINEAR DYNAMIC SYSTEMS.

Lai, S. H-Y. & Hsieh, S. H., 1987 Dec 1, p. 89-95. 7 p.

Research output: Contribution to conferencePaper

Dynamical systems
Computational methods
Nonlinear systems
Identification (control systems)

THRESHOLD MODELS FOR NONLINEAR TIME SERIES ANALYSIS.

Lai, S. H-Y. & Hsieh, S. H., 1987 Jan 1, p. 369-374. 6 p.

Research output: Contribution to conferencePaper

Time series analysis
Systems engineering
Physical properties

VIBRATIONS OF AN ORTHOTROPIC PLATE SUBJECTED TO A FOLLOWER FORCE.

Chen, L-W. & Yu, C. Y., 1987 Dec 1, p. 5-10. 6 p.

Research output: Contribution to conferencePaper

Orthotropic plates
Finite element method
1988
2 Citations (Scopus)

Coding design expert system for automatic assembly

Lai, S. H-Y., 1988 Dec 1, p. 443-450. 8 p.

Research output: Contribution to conferencePaper

Expert systems
Automation
Decision making
Hardware

MAXIMUM DENSITY EFFECTS ON VORTEX INSTABILITY OF HORIZONTAL AND INCLUDED BUOYANCY-INDUCED FLOWS IN POROUS MEDIA.

Jang, J-Y. & Chang, W. J., 1988 Jan 1, p. 297-305. 9 p.

Research output: Contribution to conferencePaper

Buoyancy
Porous materials
Vortex flow
Heat transfer
Boundary layer flow

Moving grid method for the computation of recirculating flow

Lee, D. & Lee, H. T., 1988 Dec 1, p. 485-489. 5 p.

Research output: Contribution to conferencePaper

On the dead-center positions of planar linkage mechanisms

Yan, H-S. & Wu, L. L., 1988 Dec 1, p. 71-78. 8 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Real-time compensator of geometrical and kinematic errors of a multiaxis machine

Lin, P-D. & Eman, K. F., 1988 Dec 1, p. 1069-1074. 6 p.

Research output: Contribution to conferencePaper

Kinematics
Error compensation
Machining centers
Feedforward control
Feedback

TURBINE BLADE PROFILE ANALYSIS FOR DESIGN AND MANUFACTURING.

Owusu-Ofori, S. P., Lai, S. H-Y. & Sharma, A. K., 1988 Jan 1.

Research output: Contribution to conferencePaper

Turbomachine blades
Turbines
Splines
Geometry
Airfoils
1989
4 Citations (Scopus)

Expert system for the structural identification and generalization of mechanical devices

Yan, H-S. & Hwang, Y. W., 1989 Dec 1, p. 337-343. 7 p.

Research output: Contribution to conferencePaper

Expert systems
Inference engines
User interfaces
Automation
Data storage equipment
13 Citations (Scopus)

New algorithm for automatic sketching of kinematic chains

Yan, H-S. & Hwang, Y. W., 1989 Dec 1, p. 245-250. 6 p.

Research output: Contribution to conferencePaper

Kinematics
Computer program listings

Precomputed-gain nonlinear filters for nonlinear systems with state-dependent noise

Chang, R. J., 1989 Dec 1, p. 2639-2645. 7 p.

Research output: Contribution to conferencePaper

Linearization
Nonlinear systems
Stochastic systems
Extended Kalman filters
Monte Carlo simulation
1990
7 Citations (Scopus)

Development of the infrared pyrometer with fiber optic for measuring cutting temperature at high speed cutting

Lin, J., Chen, T. C. & Weng, C. L., 1990 Dec 1, p. 17-32. 16 p.

Research output: Contribution to conferencePaper

Pyrometers
Fiber optics
Infrared radiation
Temperature
Surface measurement

Movable spatial 6R mechanisms with three adjacent parallel axes

Lee, C. C. & Yan, H. S., 1990 Dec 1, p. 263-270. 8 p.

Research output: Contribution to conferencePaper

Simplified equations for the synthesis of four-bar path generator with specified tangents at two cusps

Hwang, W-M. & Chang, C. F., 1990 Dec 1, p. 369-371. 3 p.

Research output: Contribution to conferencePaper

Kinematics
1991
19 Citations (Scopus)

Weighting function selection in H design

Postlethwaite, I., Tsai, M. C. & Gu, D. W., 1991 Jan 1, p. 127-132. 6 p.

Research output: Contribution to conferencePaper

Controllers
Disturbance rejection
Constrained optimization
Poles
Specifications
1992
15 Citations (Scopus)

Analytical method for locating velocity instantaneous centers

Yan, H. S. & Hsu, M. H., 1992 Dec 1, p. 353-359. 7 p.

Research output: Contribution to conferencePaper

Kinematics

Kinematic analysis and synthesis type III movable spatial 6R mechanism with three adjacent parallel axes

Lee, C. C. & Yan, H-S., 1992 Dec 1, p. 607-613. 7 p.

Research output: Contribution to conferencePaper

Kinematics
Landing gear (aircraft)
Animation
Wheels
Geometry

Shape optimization by using simulated biological growth approaches

Chen, J. L. & Tsai, W. C., 1992 Jan 1, p. 895-901. 7 p.

Research output: Contribution to conferencePaper

Shape optimization
1994

Adaptive control of a magnetically levitated structure

Ju, M-S. & Chang, L. T., 1994 Dec 1, p. 643-648. 6 p.

Research output: Contribution to conferencePaper

Actuators
Magnetic structure
Vibration control
Permanent magnets
Air

Application of genetic algorithm for the support location optimization of beams

Wang, B. P. & Chen, J. L., 1994 Dec 1, p. 323-327. 5 p.

Research output: Contribution to conferencePaper

Genetic algorithms
Boundary conditions
Optimal design
2 Citations (Scopus)

Bending vibrations of rotating nonuniform Timoshenko beams with an elastically restrained root

Lee, S-Y. & Lin, S. M., 1994 Dec 1, p. 1-7. 7 p.

Research output: Contribution to conferencePaper

Differential equations
Coriolis force
Buckling
Natural frequencies
Materials properties
1 Citation (Scopus)

Finite element formulation of flexible slider crank mechanism using local coordinates

Fallahi, B., Lai, S. & Venkat, C., 1994 Dec 1, p. 309-317. 9 p.

Research output: Contribution to conferencePaper

Computational efficiency
Productivity

Kinematic method for improving motion characteristics of cam-follower systems

Yan, H-S., Tsai, M-C., Hsu, M. H., Fong, M. K. & Hsieh, W. H., 1994 Dec 1, p. 253-260. 8 p.

Research output: Contribution to conferencePaper

Cams
Kinematics
Trajectories

On the surface geometry of variable pitch cylindrical cams with hyperboloidical meshing elements

Kang, Y. H., Wu, F. C., Cheng, H. Y. & Yan, H. S., 1994 Dec 1, p. 115-120. 6 p.

Research output: Contribution to conferencePaper

Cams
Geometry
Gears
Computer program listings

Transient hygrothermal stresses induced in two-dimensional problems by nonlinear theory of coupled heat and moisture

Chen, T-C. & Hwang, B. H., 1994 Dec 1, p. 1-6. 6 p.

Research output: Contribution to conferencePaper

Temperature distribution
Moisture
Inverse transforms
Laplace transforms
Composite materials
1995
3 Citations (Scopus)

Speed controller design using singular H control

Hsien, T. L., Sun, Y. Y. & Tsai, M. C., 1995 Dec 1, p. 632-636. 5 p.

Research output: Contribution to conferencePaper

Controllers
Real time control
Synchronous motors
Robust control
Permanent magnets
1996

Explicit formula for general H control

Tsai, C. S., Tsai, M-C. & Sun, Y. Y., 1996 Dec 1, p. 1376-1381. 6 p.

Research output: Contribution to conferencePaper

Factorization
Linear matrix inequalities
Transfer functions
Controllers

Low-order H controller design with an application in flexible servomechanisms

Tsai, C. S., Tsai, M-C. & Sun, Y. Y., 1996 Dec 1, p. 199-203. 5 p.

Research output: Contribution to conferencePaper

Servomechanisms
Controllers
Scattering
4 Citations (Scopus)

Numerical analysis of two-dimensional laminar flow over an elliptic tube bank

Jang, J-Y. & Li, B. C., 1996 Dec 1, p. 547-552. 6 p.

Research output: Contribution to conferencePaper

Laminar flow
Pressure drop
Numerical analysis
Nusselt number
Heat transfer coefficients

Oblique impact and perforation behaviours of AISI 4340 alloy steel plate by hemispherically-tipped tungsten sinter alloys projectile

Lee, W-S. & Lin, C. C., 1996 Jan 1, p. 351-360. 10 p.

Research output: Contribution to conferencePaper

Alloy steel
Projectiles
Tungsten
Perforating
Perforated plates
8 Citations (Scopus)

Robust speed control of permanent magnet synchronous motors: Design and experiments

Hsien, T. L., Tsai, M. C. & Sun, Y. Y., 1996 Dec 1, p. 1177-1182. 6 p.

Research output: Contribution to conferencePaper

Synchronous motors
Speed control
Robust control
Permanent magnets
Torque