Department of Mechanical Engineering

Research Output 1978 2020

Filter
Article
2020

Effects of fluorination of carbon film and annealing conditions on side leakage current and current breakdown time of SiO2/graphene/Cu/Ti/SiO2/Si specimens

Chang, C. S., Cheng, H. C., Han, C. F., Lai, C. S. & Lin, J. F., 2020 Feb, In : Vacuum. 172, 109037.

Research output: Contribution to journalArticle

Fluorination
fluorination
Graphite
Carbon films
Leakage currents
phase change materials
Phase change materials
heat sinks
Heat sinks
Emulsions
tube heat exchangers
chimneys
Chimneys
Natural convection
free convection

Total effective surface area principle for enhancement of capacitive humidity sensor of thick-film nanoporous alumina

Chung, C. K., Khor, O. K., Kuo, E. H. & Ku, C. A., 2020 Feb 1, In : Materials Letters. 260, 126921.

Research output: Contribution to journalArticle

Capacitive sensors
Humidity sensors
Aluminum Oxide
Thick films
thick films
ball bearings
Ball bearings
coefficient of friction
Entropy
Wear of materials
2019

3D dynamic thermal and thermomechanical stress analysis of a hot blast stove

Gan, Y. F., Jang, J-Y. & Wu, T. Y., 2019 Jan 1, (Accepted/In press) In : Ironmaking and Steelmaking.

Research output: Contribution to journalArticle

Stoves
Stress analysis
Linings
Refractory materials
Domes
2 Citations (Scopus)
Biopsy
Needles
Tissue
Torque

Adaptive process control of the changeover point for injection molding process

Chen, Y. S., Wu, K. T., Tsai, M. H., Hwang, S. J., Lee, H. H., Peng, H. S. & Chu, H. Y., 2019 Jan 1, (Accepted/In press) In : Journal of Low Frequency Noise Vibration and Active Control.

Research output: Contribution to journalArticle

Open Access
injection molding
Injection molding
Process control
Viscosity
viscosity

A generalized framework for controlling FDR in gene regulatory network inference

Morgan, D., Tjärnberg, A., Nordling, T. & Sonnhammer, E. L. L., 2019 Mar 15, In : Bioinformatics. 35, 6, p. 1026-1032 7 p.

Research output: Contribution to journalArticle

Gene Regulatory Networks
Gene Regulatory Network
Genes
Bootstrapping
Bootstrap
1 Citation (Scopus)

A hydrolyzed chicken extract CMI-168 enhances learning and memory in middle-aged mice

Tsai, S. F., Chang, C. Y., Yong, S. M., Lim, A. L., Nakao, Y., Chen, S. J. & Kuo, Y. M., 2019 Jan, In : Nutrients. 11, 1, 27.

Research output: Contribution to journalArticle

Open Access
middle-aged adults
chicken meat
Meat
Chickens
ingredients

Analysis of a customized cervical collar to improve neck posture during smartphone usage: a comparative study in healthy subjects

Kuo, Y. R., Fang, J-J., Wu, C. T., Lin, R. M., Su, P-F. & Lin, C-L., 2019 Aug 1, In : European Spine Journal. 28, 8, p. 1793-1803 11 p.

Research output: Contribution to journalArticle

Posture
Healthy Volunteers
Neck
Head
Sports

Analysis of heat transfer enhancement of electrohydrodynamic electrode in a horizontal enclosure

Jang, J. Y., Chen, C. C. & Leu, J. S., 2019 Jan 1, In : Journal of thermophysics and heat transfer. 33, 4, p. 1176-1180 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
subdivisions
grooves
gratings
Sequence Analysis
Industry

An Intelligent Metrology Architecture with AVM for Metal Additive Manufacturing

Yang, H. C., Adnan, M., Huang, C. H., Cheng, F-T., Lo, Y-L. & Hsu, C. H., 2019 Jul 1, In : IEEE Robotics and Automation Letters. 4, 3, p. 2886-2893 8 p., 8733865.

Research output: Contribution to journalArticle

3D printers
Metrology
Manufacturing
Metals
Module

A novel design of an expandable cage used in posterior interbody fusion for lumbar spine surgery

Fang, J. J., Hsiao, Y. C. & Lin, R. M., 2019 Jan 1, In : Computer-Aided Design and Applications. 16, 4, p. 679-687 9 p.

Research output: Contribution to journalArticle

Cage
Spine
Surgery
Fusion
Fusion reactions
1 Citation (Scopus)
curved surfaces
printing
Lithography
Printing
electric contacts
2 Citations (Scopus)

Application of Legendre orthogonal polynomial method in calculating reflection and transmission coefficients of multilayer plates

Guorong, S., Mingkun, L., Yan, L., Lee, Y-C., Bin, W. & Cunfu, H., 2019 Jan 1, In : Wave Motion. 84, p. 32-45 14 p.

Research output: Contribution to journalArticle

polynomials
solid-solid interfaces
reflectance
liquid-solid interfaces
coefficients

Atomistic study on shape memory properties of Ni-Al alloys

Chang, I-L., Hsu, C. C. & Chao, T. H., 2019 Jan 1, In : Journal of Materials Research.

Research output: Contribution to journalArticle

Shape memory effect
Recovery
recovery
Phase transitions
heating

Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

Jhong, K. J., Chang, T. W., Lee, W. H., Tsai, M. C. & Jiang, I. H., 2019 Mar 1, In : AIP Advances. 9, 3, 035317.

Research output: Contribution to journalArticle

Open Access
electric motors
melting
electromagnetic properties
eddy currents
printing
Carrier mobility
Carrier concentration
Electric properties
Optical properties
Glass

Configuration synthesis of two-mode hybrid transmission systems with nine-link mechanisms

Ho, T. T. & Hwang, S-J., 2019 Dec 1, In : Mechanism and Machine Theory. 142, 103615.

Research output: Contribution to journalArticle

Kinematics
Clutches
Brakes
Gears

Contact photolithography at sub-micrometer scale using a soft photomask

Wu, C. Y., Hsieh, H. & Lee, Y. C., 2019 Aug 1, In : Micromachines. 10, 8, 547.

Research output: Contribution to journalArticle

Open Access
Photomasks
Photolithography
Polydimethylsiloxane
Photoresists
Linewidth

Design of a laser-based autofocusing microscope for a sample with a transparent boundary layer

Liu, C. S., Song, R. C. & Fu, S. J., 2019 Nov 1, In : Applied Physics B: Lasers and Optics. 125, 11, 199.

Research output: Contribution to journalArticle

boundary layers
microscopes
image processing
lasers
lenses
2 Citations (Scopus)

Design of a measurement system for six-degree-of-freedom geometric errors of a linear guide of a machine tool

Liu, C. S., Lai, J. J. & Luo, Y. T., 2019 Jan, In : Sensors (Switzerland). 19, 1, 5.

Research output: Contribution to journalArticle

Yaws
machine tools
Machine tools
degrees of freedom
Theoretical Models

Design of a miniature series elastic actuator for bilateral teleoperations requiring accurate torque sensing and control

Yu, Y. L. & Lan, C-C., 2019 Apr 1, In : IEEE Robotics and Automation Letters. 4, 2, p. 500-507 8 p., 8604035.

Research output: Contribution to journalArticle

Teleoperation
Remote control
Torque
Actuator
Sensing
2 Citations (Scopus)

Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification

Kuo, J. K., Huang, P. H., Lai, S. H-Y. & Wu, W. J., 2019 Jan 16, In : International Journal of Advanced Manufacturing Technology. 100, 1-4, p. 529-540 12 p.

Research output: Contribution to journalArticle

Exhaust manifolds
Casting
Stainless steel
Defects
Porosity

Design of VCM actuator for optical zooming smartphone cameras

Chang, Y. H., Hu, C. C., Hsieh, C. L. & Liu, C-S., 2019 Jan 9, In : Microsystem Technologies. 25, 1, p. 277-281 5 p.

Research output: Contribution to journalArticle

Smartphones
Actuators
actuators
Cameras
cameras
Mechanical properties
3D printers
Frequency division multiplexing
Air permeability
Static analysis

Dual-mode power drive for active magnetic bearings

Chiu, H. L. & Tsai, N-C., 2019 Feb 1, In : IET Electric Power Applications. 13, 2, p. 162-167 6 p.

Research output: Contribution to journalArticle

Magnetic bearings
Networks (circuits)
Digital signal processors
Power amplifiers
Pulse width modulation
Enclosures
Natural convection
Pipelines
Heat transfer
Flow of fluids
Viscoelasticity
Medical problems
Rats
Optical tomography
Elastic moduli
1 Citation (Scopus)
Open Access
Laser modes
Sulfur
Powders
Stainless Steel
Melting
2 Citations (Scopus)

Elastic wave propagation of two-dimensional metamaterials composed of auxetic star-shaped honeycomb structures

Chang, S. Y., Chen, C-D., Yeh, J. Y. & Chen, L-W., 2019 Mar 1, In : Crystals. 9, 3, 121.

Research output: Contribution to journalArticle

Open Access
Honeycomb structures
honeycomb structures
Elastic waves
Metamaterials
elastic waves

Electrochemical properties of biopolymers in strong acid and application in displacement sensor

Shi, S. C., 2019 Jan 1, In : Sensors and Materials. 31, 5, p. 1599-1608 10 p.

Research output: Contribution to journalArticle

Open Access
hydroxypropylmethylcellulose acetate succinate
phthalates
Biopolymers
Steel
biopolymers

Emissivity calibration method for pyrometer measurement of melting pool temperature in selective laser melting of stainless steel 316L

Ren, C. G., Lo, Y. L., Tran, H. C. & Lee, M. H., 2019 Nov 1, In : International Journal of Advanced Manufacturing Technology. 105, 1-4, p. 637-649 13 p.

Research output: Contribution to journalArticle

Pyrometers
Melting
Stainless steel
Calibration
Lasers

Enhanced cell proliferation on biomedical titanium surfaces by laser ablation-induced micro- And nanoscale hybrid structures

Lee, H-T. & Lin, C. C., 2019 Jan 1, In : Materials Transactions. 60, 9, p. 1799-1806 8 p.

Research output: Contribution to journalArticle

hybrid structures
Cell proliferation
Laser ablation
Titanium
microbalances

Experimental study of cooling characteristics of water-based alumina nanofluid in a minichannel heat sink

Ho, C-J., Liao, J. C., Li, C. H., Yan, W. M. & Amani, M., 2019 Sep 1, In : Case Studies in Thermal Engineering. 14, 100418.

Research output: Contribution to journalArticle

Open Access
Aluminum Oxide
Heat sinks
Reynolds number
Alumina
Cooling
7 Citations (Scopus)
ceilings
Aluminum Oxide
wall temperature
heat sinks
Ceilings
2 Citations (Scopus)

Experimental study of transient thermal characteristics of nanofluid in a minichannel heat sink with MEPCM layer in its ceiling

Ho, C-J., Liao, J. C., Yan, W. M. & Amani, M., 2019 Apr 1, In : International Journal of Heat and Mass Transfer. 133, p. 1041-1051 11 p.

Research output: Contribution to journalArticle

ceilings
heat sinks
Ceilings
Heat sinks
wall temperature

Fabrication of thin-film spherical anodic alumina oxide templates using a superimposed nano-micro structure

Chung, C. K., Tu, K. T., Chang, C. Y. & Peng, Y. C., 2019 Mar 15, In : Surface and Coatings Technology. 361, p. 170-175 6 p.

Research output: Contribution to journalArticle

Aluminum Oxide
Oxides
Alumina
templates
aluminum oxides
2 Citations (Scopus)

High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation

Tsai, S. P., Tsai, Y. T., Chen, Y. W., Chen, P. J., Chiu, P. H., Chen, C. Y., Lee, W-S., Yeh, J. W. & Yang, J. R., 2019 Jan 1, In : Materials Characterization. 147, p. 193-198 6 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
Entropy
entropy
strain hardening
3 Citations (Scopus)
Machine tools
Machining
Compensation and Redress
Kinematics
Controllers
5 Citations (Scopus)
Machine tools
Calibration
Inverse kinematics
Machining
Kinematics

Maskless lithography based on digital micromirror device (DMD) and double sided microlens and spatial filter array

Dinh, D. H., Chien, H. L. & Lee, Y-C., 2019 May 1, In : Optics and Laser Technology. 113, p. 407-415 9 p.

Research output: Contribution to journalArticle

Digital devices
Lithography
lithography
Microfabrication
filters
1 Citation (Scopus)

Mixed H and passivity-based resilient controller for nonhomogeneous Markov jump systems

Sathishkumar., M., Sakthivel, R., Alzahrani, F., Kaviarasan, B. & Ren, Y., 2019 Feb 1, In : Nonlinear Analysis: Hybrid Systems. 31, p. 86-99 14 p.

Research output: Contribution to journalArticle

Markov Jump Systems
Passivity
Quantization
Time-varying
Passivity-based Control
1 Citation (Scopus)

Model and characterization of a press-button-type piezoelectric energy harvester

Yang, C-L., Chen, K. W. & Chen, C-D., 2019 Feb 1, In : IEEE/ASME Transactions on Mechatronics. 24, 1, p. 132-143 12 p., 8491348.

Research output: Contribution to journalArticle

Harvesters
Numerical models
Piezoelectricity
Magnets
Capacitors
Gears
Computer simulation
Gear teeth
Hybrid vehicles
Fuel economy

Molecular dynamics simulation on mechanical behaviors of NixAl100-x nanowires under uniaxial compressive stress

Hsu, F. C. & Chen, T-C., 2019 Jan 1, In : AIMS Materials Science. 6, 3, p. 377-396 20 p.

Research output: Contribution to journalArticle

Open Access
Compressive stress
Nanowires
Molecular dynamics
Quenching
Computer simulation

Multi-scale modeling of selective electron beam melting of Ti6Al4V titanium alloy

Le, T. N., Lo, Y. L. & Tran, H. C., 2019 Nov 1, In : International Journal of Advanced Manufacturing Technology. 105, 1-4, p. 545-563 19 p.

Research output: Contribution to journalArticle

Electron beam melting
Titanium alloys
Powders
Electron beams
3D printers

Nanoscale mechanical and mechanically-induced electrical properties of silicon nanowires

Lin, Y. H. & Chen, T. C., 2019 May, In : Crystals. 9, 5, 240.

Research output: Contribution to journalArticle

Open Access
Silicon
Acoustic impedance
Nanowires
phase transformations
electrical resistance