Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference article
2019

Case Study: Taiwan's pathway into a circular future for buildings

Van Bueren, B. J. A., Leenders, M. A. A. M. & Nordling, T., 2019 Feb 25, In : IOP Conference Series: Earth and Environmental Science. 225, 1, 012060.

Research output: Contribution to journal › Conference article

Open Access
social housing
stakeholder
flora
village
innovation

Structural analysis of hydrogenated diamond-like carbon coatings prepared using magnetron sputtering

Su, Y-L., Yao, S. H., Mao, Y. H. & You, Z. L., 2019 Feb 13, In : IOP Conference Series: Materials Science and Engineering. 474, 1, 012010.

Research output: Contribution to journal › Conference article

Open Access
Diamond
Acetylene
Structural analysis
Magnetron sputtering
Diamonds
2018

A Novel Measurement for Monitoring Mechanical Impedance Applied to Breakthrough Detection of Bone-Drill System

Ko, P. J. & Tsai, M-C., 2018 Aug 20, In : IOP Conference Series: Materials Science and Engineering. 398, 1, 012028.

Research output: Contribution to journal › Conference article

Bone
Monitoring
DC motors
Drilling
Mathematical transformations

Evaluating the performance of a water-cooled scooter engine through a 3-D numerical and experimental anaysis

Lien, H. P., Jang, J-Y. & Chen, P. K., 2018 Aug 31, In : IOP Conference Series: Materials Science and Engineering. 397, 1, 012005.

Research output: Contribution to journal › Conference article

Motor scooters
Engines
Water
Flow fields
3D printers

Investigations of Bending Singularity Orders in a V-notched Composite Laminate Plate Based on the Ressiner-Mindlin Theory

Chen, C. D., 2018 Feb 21, In : MATEC Web of Conferences. 151, 01001.

Research output: Contribution to journal › Conference article

Laminates
Composite materials
Anisotropy
Eigenvalues and eigenfunctions
2017

An eco-innovation method for products in bottom of the pyramid (BOP)

Chen, J. L. & Chung, S. H., 2017 Jan 1, In : Proceedings of the International Conference on Engineering Design, ICED. 1, DS87-1, p. 141-149 9 p.

Research output: Contribution to journal › Conference article

Pyramid
Innovation
Education
Design Process
3 Citations (Scopus)

Developing Sustainable Innovative Products for the Bottom of the Pyramid by Biomimetic Design Concepts

Chen, J. L. & Lee, C. L., 2017 Jan 1, In : Procedia CIRP. 61, p. 629-634 6 p.

Research output: Contribution to journal › Conference article

Biomimetics
1 Citation (Scopus)

Development of Knowledge-Expandable Ontology-Based Expert System for Process Planning in Cold Forging of Flange Nuts

Chang, C. W., Lee, R-S. & Chang, T. W., 2017 Jan 1, In : Procedia Engineering. 207, p. 502-507 6 p.

Research output: Contribution to journal › Conference article

Process planning
Flanges
Forging
Expert systems
Ontology

The Effects of Cylinder Head Gasket Opening on Engine Temperature Distribution for a Water-Cooled Engine

Jang, J. Y. & Chi, G. X., 2017 Feb 17, In : IOP Conference Series: Materials Science and Engineering. 170, 1, 012037.

Research output: Contribution to journal › Conference article

Cylinder heads
Temperature distribution
Engines
Water
Motorcycles

The measuring technique developed to evaluate the thermal diffusivity of the multi-layered thin film specimens

Li, T. C., Li, Y. R. & Lin, J-F., 2017 Sep 21, In : MATEC Web of Conferences. 123, 00026.

Research output: Contribution to journal › Conference article

Thermal diffusivity
Thin films
Thermocouples
Steel
Substrates
2016
5 Citations (Scopus)

Numerical simulation for heat and mass transfer during selective laser melting of titanium alloys powder

Li, C. J., Tsai, T. W. & Tseng, C-C., 2016 Jan 1, In : Physics Procedia. 83, p. 1444-1449 6 p.

Research output: Contribution to journal › Conference article

titanium alloys
solidification
mass transfer
heat transfer
melting
2015

An application of Mueller matrix polarimetry for characterising properties of thin film with surface roughness

Phan, Q. H. & Lo, Y. L., 2015 Dec 2, In : MATEC Web of Conferences. 32, 05006.

Research output: Contribution to journal › Conference article

Polarimeters
Surface roughness
Thin films
Ellipsometry
Refractive index
6 Citations (Scopus)

Mechanical design of a gravity-balancing wearable exoskeleton for the motion enhancement of human upper limb

Hsieh, H. C., Chien, L. & Lan, C. C., 2015 Jun 29, In : Proceedings - IEEE International Conference on Robotics and Automation. 2015-June, June, p. 4992-4997 6 p., 7139893.

Research output: Contribution to journal › Conference article

Gravitation
Actuators
2 Citations (Scopus)

Quantifying the life cycle water consumption of a machine tool

Chen, J. L., Chen, Y. B. & Huang, H. C., 2015 Jan 1, In : Procedia CIRP. 29, p. 498-501 4 p.

Research output: Contribution to journal › Conference article

Machine tools
Life cycle
Water
2014
6 Citations (Scopus)

Design and control of a robotic wrist with two collocated axes of compliant actuation

Chu, C. Y., Xu, J. Y. & Lan, C-C., 2014 Sep 22, In : Proceedings - IEEE International Conference on Robotics and Automation. p. 6156-6161 6 p., 6907766.

Research output: Contribution to journal › Conference article

Human robot interaction
Torque control
Force control
Elasticity
Robotics
11 Citations (Scopus)

Experimental and theoretical studies on formability of 22MnB5 at elevated temperatures by Gleeble simulator

Lee, R. S., Lin, Y. K. & Chien, T. W., 2014 Jan 1, In : Procedia Engineering. 81, p. 1682-1688 7 p.

Research output: Contribution to journal › Conference article

Formability
Simulators
Temperature
Steel sheet
High strength steel

Open architecture of virtual machine tool for cloud computing

Lee, R-S., Mei, K. J., Xu, P. & Wu, C. M., 2014 Jan 1, In : IEEE International Conference on Automation Science and Engineering. 2014-January, p. 905-909 5 p., 6899433.

Research output: Contribution to journal › Conference article

Cloud computing
Machine tools
Machining
Data storage equipment
Virtual machine
2 Citations (Scopus)

Passivity-based control for networked robotic system over unreliable communication

Liu, Y. C. & Puah, S. M., 2014 Sep 22, In : Proceedings - IEEE International Conference on Robotics and Automation. p. 1769-1774 6 p., 6907090.

Research output: Contribution to journal › Conference article

Robotics
Packet loss
Communication
Modulation
Robots
3 Citations (Scopus)

Passivity-based teleoperation system for robots with parametric uncertainty and communication delay

Liu, Y. C. & Khong, M. H., 2014 Jan 1, In : IEEE International Conference on Automation Science and Engineering. 2014-January, p. 271-276 6 p., 6899337.

Research output: Contribution to journal › Conference article

Remote control
Robots
Communication
Large scale systems
Robotics

Synchronization of robotic manipulators with kinematic and dynamic uncertainties over delayed communication network

Liu, Y-C., 2014 Jan 1, In : Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics. 2014-January, January, p. 3440-3445 6 p., 6974461.

Research output: Contribution to journal › Conference article

Telecommunication networks
Manipulators
Synchronization
Kinematics
Robotics
7 Citations (Scopus)

Using DMA to simultaneously acquire young's relaxation modulus and time-dependent Poisson's ratio of a viscoelastic material

Chen, D. L., Chiu, T-C., Chen, T-C., Chung, M. H., Yang, P. F. & Lai, Y. S., 2014 Jan 1, In : Procedia Engineering. 79, p. 153-159 7 p.

Research output: Contribution to journal › Conference article

Poisson ratio
Dynamic mechanical analysis
Elastic moduli
Sheet molding compounds
10 Citations (Scopus)

Validation and measurements of floating LiDAR for nearshore wind resource assessment application

Hsuan, C. Y., Tasi, Y. S., Ke, J. H., Prahmana, R. A., Chen, K. J. & Lin, T-H., 2014 Jan 1, In : Energy Procedia. 61, p. 1699-1702 4 p.

Research output: Contribution to journal › Conference article

Offshore wind farms
Motion compensation
Ports and harbors
Lenses
Turbulence
1 Citation (Scopus)

Voltage-current-based state and disturbance estimation for power-assisted control applied to an electric wheelchair

Hsueh, P. W., Tsai, M-C., Lin, C. Y., Ko, P. J. & Yao, W. S., 2014 Jan 1, In : IEEE International Conference on Automation Science and Engineering. 2014-January, p. 1220-1225 6 p., 6899482.

Research output: Contribution to journal › Conference article

Wheelchairs
Electric potential
Torque
Electric drives
Low pass filters
2013

Accelerated composite distribution function methods for computational fluid dynamics using GPU

Smith, M-H. & Chen, Y. C., 2013 Jan 1, In : Proceedings of Science. 14-17-October-2013, 068.

Research output: Contribution to journal › Conference article

Distribution functions
Computational fluid dynamics
Fluxes
Composite materials
Kinetic theory of gases

Extension of the uniform equilibrium flux method (UEFM) to second order accuracy and its graphics processing unit acceleration

Smith, M-H., Chen, Y. C., Liu, J. Y., Ferguson, A. & Wu, J. S., 2013 Jan 1, In : Procedia Engineering. 61, p. 70-75 6 p.

Research output: Contribution to journal › Conference article

Fluxes
Exponential functions
Thermal gradients
Probability distributions
Distribution functions
2 Citations (Scopus)

Hybrid OpenMP/AVX acceleration of a higher order quiet direct simulation method for the euler equations

Smith, M-H., Liu, J. Y., Kuo, F. A. & Wu, J. S., 2013 Jan 1, In : Procedia Engineering. 61, p. 152-157 6 p.

Research output: Contribution to journal › Conference article

Euler equations
Program processors
Fluxes
Computer workstations
Data storage equipment
2012
13 Citations (Scopus)

A piezoelectric vibration-based syringe for reducing insertion force

Huang, Y. C., Tsai, M-C. & Lin, C. H., 2012 Dec 1, In : IOP Conference Series: Materials Science and Engineering. 42, 1, 012020.

Research output: Contribution to journal › Conference article

Syringes
Needles
Tissue
Piercing
Skin

Detection of tissue properties using a piezoelectric vibration-based syringe

Lin, C. H., Huang, Y. C. & Tsai, M-C., 2012 Dec 1, In : IOP Conference Series: Materials Science and Engineering. 42, 1, 012002.

Research output: Contribution to journal › Conference article

Syringes
Tissue
Needles
Acoustic impedance
Ablation

Synchronous decoupled motion control for power-wheelchairs

Yang, F. Y. & Tsai, M-C., 2012 Apr 4, In : Advanced Materials Research. 482-484, p. 1904-1911 8 p.

Research output: Contribution to journal › Conference article

Wheelchairs
Motion control
Vehicle transmissions
Mathematical models
2010
1 Citation (Scopus)

Measurement of friction force between two mica surfaces with multiple beam interferometry

Jung, J. C. & Chen, T., 2010 Jun 9, In : EPJ Web of Conferences. 6, 06002.

Research output: Contribution to journal › Conference article

mica
interferometry
friction
tribology
shear strength

Measurement of the optical rotation angle using a rotating-wave-plate stokes polarimeter

Lin, J. F., Lo, Y-L., Liao, T. T. & Chang, C. C., 2010 Jun 9, In : EPJ Web of Conferences. 6, 32004.

Research output: Contribution to journal › Conference article

polarimeters
glucose
correlation coefficients
standard deviation
gels
3 Citations (Scopus)

Using polarimeter and Stokes parameters for measuring linear birefringence and diattenuation properties of optical samples

Chen, P. C. & Lo, Y. L., 2010 Jun 9, In : EPJ Web of Conferences. 6, 32001.

Research output: Contribution to journal › Conference article

polarimeters
birefringence
rangefinding
phase shift
methodology
2009

An approximate method for solving rarefied and transitional flows using TDEFM with isotropic mesh adaptation

Smith, M-H., Cave, H. M., Wu, J. S. & Macrossan, M. N., 2009 Apr 13, In : AIP Conference Proceedings. 1084, p. 371-376 6 p.

Research output: Contribution to journal › Conference article

mesh
continuums
cells
kinetic theory
momentum

Damping vibration studies of scanning near-field optical microscope

Chen, T. Y-F. & Lee, H. L., 2009 Mar 23, In : Proceedings of SPIE - The International Society for Optical Engineering. 7133, 71330H.

Research output: Contribution to journal › Conference article

vibration damping
Near-field
optical microscopes
Microscope
Vibrations (mechanical)
3 Citations (Scopus)

Fast positioning and impact minimizing of mems devices by suppression motion-induced vibration by command shaping method

Chen, K. S. & Ou, K. S., 2009 Jun 1, In : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). p. 1103-1106 4 p., 4805580.

Research output: Contribution to journal › Conference article

commands
positioning
Energy conservation
Switches
retarding
4 Citations (Scopus)

Instantaneous surface profile measurement using polarized phase-shifting

Chen, T. Y-F. & Du, Y. L., 2009 Dec 1, In : Proceedings of SPIE - The International Society for Optical Engineering. 7375, 73754M.

Research output: Contribution to journal › Conference article

Surface Profile
Phase Shifting
Surface measurement
Interferometers
Instantaneous
2 Citations (Scopus)

Measurement of optical rotation and depolarization using both linearly and circularly polarized lights

Lin, J. F. & Lo, Y-L., 2009 Dec 1, In : Proceedings of SPIE - The International Society for Optical Engineering. 7375, 73754K.

Research output: Contribution to journal › Conference article

Optical rotation
Depolarization
Light polarization
depolarization
polarized light
2008

On the turbulence model for a centrifugal fan and the thermal performance of plate-fins fan-sink assemblies

Lee, S-Y., Lin, S. M. & Lin, M. H., 2008 Jan 1, In : International Symposium on Advances in Computational Heat Transfer.

Research output: Contribution to journal › Conference article

turbulence models
fins
sinks
Turbulence models
fans
2007
64 Citations (Scopus)

Combustion in meso-scale vortex chambers

Wu, M-H., Wang, Y., Yang, V. & Yetter, R. A., 2007 Sep 24, In : Proceedings of the Combustion Institute. 31 II, p. 3235-3242 8 p.

Research output: Contribution to journal › Conference article

combustion chambers
Combustors
Vortex flow
chambers
vortices
115 Citations (Scopus)

Flame acceleration and the transition to detonation of stoichiometric ethylene/oxygen in microscale tubes

Wu, M-H., Burke, M. P., Son, S. F. & Yetter, R. A., 2007 Sep 24, In : Proceedings of the Combustion Institute. 31 II, p. 2429-2436 8 p.

Research output: Contribution to journal › Conference article

Detonation
detonation
microbalances
flames
Ethylene
2005

Automatic extraction of isotropic points-using min-max scanned photoelastic images

Chen, T. Y-F., Fang, Y. H. & Lin, H. S., 2005 Dec 12, In : Proceedings of SPIE - The International Society for Optical Engineering. 5852 PART II, p. 856-861 6 p., 135.

Research output: Contribution to journal › Conference article

Min-max
Structural design
Pixels
structural design
Structural Design
1 Citation (Scopus)

Burning analysis of motor scooters

Chen, C. J., Tsai, M. J., Ji, B. C., Wu, C. W., Pu, J. Y. & Lin, T. H., 2005 Jan 1, In : Fire Safety Science. p. 671-680 10 p.

Research output: Contribution to journal › Conference article

Motor scooters
Fires
Ignition
Hot Temperature
8 Citations (Scopus)

Dielectric integrity test for flip-chip devices with Cu/low-K interconnects

Odegard, C., Chiu, T-C., Hartfield, C. & Sundararaman, V., 2005 Sep 19, In : Proceedings - Electronic Components and Technology Conference. 2, p. 1163-1171 9 p.

Research output: Contribution to journal › Conference article

Flip chip devices
Silicon
Thermal stress
Residual stresses
Structural integrity

Fiber Bragg grating complete parameter synthesis by using two thermally-modulated reflection intensity spectra and genetic algorithm

Cheng, H. C. & Lo, Y. L., 2005 Dec 13, In : Proceedings of SPIE - The International Society for Optical Engineering. 5855 PART I, p. 294-297 4 p., 70.

Research output: Contribution to journal › Conference article

Fiber Grating
Fiber Bragg gratings
Bragg Grating
genetic algorithms
Gratings

Fiber bragg grating parameter estimation by using two thermally-modulated intensity spectra for arbitrary distributed strain sensing

Cheng, H. C. & Lo, Y. L., 2005 Dec 12, In : Proceedings of SPIE - The International Society for Optical Engineering. 5852 PART I, p. 365-371 7 p., 59.

Research output: Contribution to journal › Conference article

Fiber Grating
Fiber Bragg gratings
Bragg Grating
Parameter estimation
Gratings

Fiber type of Optical coherence tomography with auto-focus design

Lo, Y-L., Yan, Z. Z. & Chen, S. J., 2005 Dec 13, In : Proceedings of SPIE - The International Society for Optical Engineering. 5855 PART I, p. 258-261 4 p., 61.

Research output: Contribution to journal › Conference article

Autofocus
Optical Coherence Tomography
Optical tomography
tomography
Fiber
10 Citations (Scopus)

Fire test on a non-heat-resistant fireproof glass with down-flowing water film

Wu, C. W., Lin, T. H., Lei, M. Y., Chung, T. H., Huang, C. C. & Chiang, W. T., 2005 Jan 1, In : Fire Safety Science. p. 327-338 12 p.

Research output: Contribution to journal › Conference article

Fires
Glass
Water
Insulation
Latent heat

Measurements of the principal axis and phase retardation using a new circular polariscope and the Senarmont setup

Lin, J. F., Lo, Y-L., Lee, S-Y. & Peng, C. C., 2005 Dec 12, In : Proceedings of SPIE - The International Society for Optical Engineering. 5852 PART I, p. 240-244 5 p., 39.

Research output: Contribution to journal › Conference article

Polariscopes
polariscopes
Electrooptical effects
Phase measurement
Interferometers
6 Citations (Scopus)

Methane flames in a jet impinging onto a wall

Hsieh, W. D., Hou, S. S. & Lin, T-H., 2005 Jan 1, In : Proceedings of the Combustion Institute. 30, 1, p. 267-275 9 p.

Research output: Contribution to journal › Conference article

Methane
flames
methane
Fuel burners
stagnation flow
1 Citation (Scopus)

Using a new liquid-crystal polarization modulator for a polarimetric glucose sensor

Yu, T. C. & Lo, Y. L., 2005 Dec 12, In : Proceedings of SPIE - The International Society for Optical Engineering. 5852 PART I, p. 21-27 7 p., 03.

Research output: Contribution to journal › Conference article

Glucose sensors
Liquid Crystals
Modulator
Glucose
glucose