International Bachelor Degree Program on Energy

Research Output 1981 2020

1996
32 Citations (Scopus)

A study of fatigue damage and fatigue life of composite laminates

Wu, W. F., Lee, L. J. & Choi, S-T., 1996 Jan 1, In : Journal of Composite Materials. 30, 1, p. 123-137 15 p.

Research output: Contribution to journalArticle

Fatigue damage
Laminates
Stiffness
Fatigue of materials
Composite materials
9 Citations (Scopus)
Hardening
Unloading
hardening
Plasticity
Hysteresis
31 Citations (Scopus)

Calculation of wall heat transfer in pipeexpansion turbulent flows

Hsieh, W. D. & Chang, K. C., 1996 Dec, In : International Journal of Heat and Mass Transfer. 39, 18, p. 3813-3822 10 p.

Research output: Contribution to journalArticle

turbulent flow
Turbulent flow
heat transfer
low Reynolds number
attachment
48 Citations (Scopus)

Consolidation and cure simulations for laminated composites

Young, W-B., 1996 Jan 1, In : Polymer Composites. 17, 1, p. 142-148 7 p.

Research output: Contribution to journalArticle

Laminated composites
Consolidation
Laminates
Fibers
Autoclaves
8 Citations (Scopus)

Droplet transport in simplex and air-assisted sprays

Lai, W. H., Yang, K. H., Hong, C. H. & Wang, M. R., 1996 Jan 1, In : Atomization and Sprays. 6, 1, p. 27-49 23 p.

Research output: Contribution to journalArticle

Air
Atomizers
Methanol
Cones
Gases
41 Citations (Scopus)

Effects of flame lifting and acoustic excitation on the reduction of NOx emissions

Chao, Y. C., Yuan, T. & Tseng, C. S., 1996 Jan 1, In : Combustion science and technology. 113-114, p. 49-65 17 p.

Research output: Contribution to journalArticle

acoustic excitation
flames
Acoustics
Carbon Monoxide
excitation
33 Citations (Scopus)

Electromechanical analysis of defects in piezoelectric materials

Liang, Y. C. & Hwu, C., 1996 Jun 1, In : Smart Materials and Structures. 5, 3, p. 314-320 7 p.

Research output: Contribution to journalArticle

Piezoelectric materials
Insulator Elements
Cracks
Defects
Boundary integral equations
2 Citations (Scopus)

Experimental investigation on blade-stiffened panel with stiffener-to-skin fiber stitching

Chang, C. W. & Young, W. B., 1996 Sep, In : AIAA journal. 34, 9, p. 1964-1966 3 p.

Research output: Contribution to journalArticle

Skin
Fibers
14 Citations (Scopus)

Flopping phenomenon of flow behind two plates placed side-by-side normal to the flow direction

Miau, J. J., Wang, H. B. & Chou, J. H., 1996 May, In : Fluid Dynamics Research. 17, 6, p. 311-328 18 p.

Research output: Contribution to journalArticle

Flip flop circuits
Reynolds number
Turbulence
Experiments
free flow
20 Citations (Scopus)

Flow and mixed convection heattransfer in a divergent heatedvertical channel

Gau, C., Huang, T. M. & Aung, W., 1996 Aug, In : Journal of Heat Transfer. 118, 3, p. 606-615 10 p.

Research output: Contribution to journalArticle

Mixed convection
reversed flow
Buoyancy
convection
Nusselt number
1 Citation (Scopus)

Frequency domain control of single input/single output distributed parameter systems

Yang, S-M. & Liu, Y. C., 1996 Jan 1, In : Journal of Guidance, Control, and Dynamics. 19, 3, p. 736-738 3 p.

Research output: Contribution to journalArticle

distributed parameter systems
Distributed Parameter Systems
Frequency Domain
transcendental functions
slewing
7 Citations (Scopus)

Fuzzy successive modelling and control for time-delay systems

Jang, M. J. & Chen, C-L., 1996 Jan 1, In : International Journal of Systems Science. 27, 12, p. 1483-1490 8 p.

Research output: Contribution to journalArticle

Fuzzy filters
Blowers
Model predictive control
Time-delay Systems
Temperature control
2 Citations (Scopus)

H gain scheduling using fuzzy rules

Yang, C. D., Kuo, T. M. & Tai, H. C., 1996 Dec 1, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). p. 3794-3799 6 p. (Proceedings of the IEEE Conference on Decision and Control; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingChapter

Fuzzy rules
Fuzzy control
Scheduling
Costs

H-optimal observer-based controller design for nonlinear multivariable systems

Hsiao, F. H., Lin, C. E., Yang, C. D. & Chang, C. Y., 1996 Nov 1, In : Journal of Mathematical Analysis and Applications. 203, 3, p. 573-596 24 p.

Research output: Contribution to journalArticle

Multivariable systems
Multivariable Systems
Controller Design
Observer
Nonlinear Systems

Interaction between the crack tips of a circular arc crack

Shiah, Y-C. & Tsai, Y. M., 1996 Jan 1, p. 592-595. 4 p.

Research output: Contribution to conferencePaper

Crack tips
Cracks
Conformal mapping
32 Citations (Scopus)

Intimal thickening under shear in a carotid bifurcation - A numerical study

Lee, D. & Chiu, J. J., 1996 Jan, In : Journal of Biomechanics. 29, 1, p. 1-11 11 p.

Research output: Contribution to journalArticle

Tunica Intima
Finite volume method
Steady flow
Stress concentration
Shear stress
11 Citations (Scopus)

Limitations of the stochastic approach in two-phase turbulent flow calculations

Chang, K-C., Wu, W. J. & Wang, M. R., 1996 Jan 1, In : Atomization and Sprays. 6, 2, p. 211-225 15 p.

Research output: Contribution to journalArticle

Turbulent flow
Drag coefficient
Equations of motion
Turbulence
38 Citations (Scopus)
elliptical cylinders
buoyancy-driven flow
annuli
Buoyancy
eccentrics

On the dynamics of flight vehicle control surfaces with inertia coupling

Yang, S. M. & Chao, S. H., 1996 Mar, In : Mechanical Systems and Signal Processing. 10, 2, p. 183-195 13 p.

Research output: Contribution to journalArticle

Control surfaces
Actuators
Hydraulic actuators
Torsional stress
Transfer functions
18 Citations (Scopus)

Optimal design of the cure cycle for consolidation of thick composite laminates

Chang, M. H., Chen, C-L. & Young, W-B., 1996 Jan 1, In : Polymer Composites. 17, 5, p. 743-750 8 p.

Research output: Contribution to journalArticle

Consolidation
Laminates
Autoclaves
Composite materials
Genetic algorithms

Optimal pure proportional navigation for maneuvering targets

Yang, C-D., Yang, C. C. & Chen, H. Y., 1996 Dec 1, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). p. 2355-3592 1238 p. (Proceedings of the IEEE Conference on Decision and Control; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingChapter

Navigation
Directly proportional
Target
Guidance Law
Process Optimization
3 Citations (Scopus)

Parametrization of nonlinear H output feedback controllers - an algebraic approach via bounded real lemma

Yang, C. D., Kung, C. C., Huang, K. Y. & Yeh, F. B., 1996 Dec 1, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). p. 2355-3592 1238 p. (Proceedings of the IEEE Conference on Decision and Control; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingChapter

Algebraic Approach
Output Feedback
Parametrization
Lemma
Feedback
33 Citations (Scopus)

Punch problems for an anisotropic elastic half-plane

Fan, C. W. & Hwu, C., 1996 Mar, In : Journal of Applied Mechanics, Transactions ASME. 63, 1, p. 69-76 8 p.

Research output: Contribution to journalArticle

half planes
punches
Indentation
indentation
Boundary value problems
1 Citation (Scopus)

Sliding mode control for nonlinear systems

Chen, C-L. & Lin, W. Y., 1996 Dec 1, In : IEE Conference Publication. 427 /1, p. 557-562 6 p.

Research output: Contribution to journalConference article

Sliding mode control
Nonlinear systems
Invariance

Steady state response and stability of rotating composite blades with frictional damping

Shiau, T. N., Rao, J. S., Yu, Y. D. & Choi, S-T., 1996 Jan 1, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; General. American Society of Mechanical Engineers, (ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, GT 1996; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damping
Friction
Composite materials

Steady state response and stability of rotating composite blades with frictional damping

Shiau, T. N., Rao, J. S., Yu, Y. D. & Choi, S. T., 1996 Jan 1, In : American Society of Mechanical Engineers (Paper). p. 10 1 p.

Research output: Contribution to journalConference article

Damping
Friction
Composite materials
23 Citations (Scopus)

Structural vibration suppression by concurrent piezoelectric sensor and actuator

Yang, S. M. & Jeng, C. A., 1996 Dec 1, In : Smart Materials and Structures. 5, 6, p. 811-813 3 p.

Research output: Contribution to journalArticle

structural vibration
Actuators
actuators
retarding
sensors
3 Citations (Scopus)

Swirling flows in circular-to-rectangular transition ducts

Miau, J. J., Lin, E. C., Chen, Q. S., Chou, J. H., Pan, D. & Lin, C. K., 1996 Apr 1, In : Experiments in Fluids. 20, 6, p. 401-409 9 p.

Research output: Contribution to journalArticle

Swirling flow
swirling
ducts
Ducts
Vorticity
1 Citation (Scopus)

Synthesis of low order μ controllers using statistical iteration

Yang, C-D., Tai, H. C. & Chen, C. C., 1996 Dec 1, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). p. 2355-3592 1238 p. (Proceedings of the IEEE Conference on Decision and Control; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingChapter

Synthesis
Controller
Iteration
Controllers
Quality Control
1 Citation (Scopus)

Synthesis of optimal H controllers via H2-based loop-shaping design

Yang, C. D. & Chang, C. Y., 1996 Jan 1, In : Journal of Guidance, Control, and Dynamics. 19, 4, p. 878-885 8 p.

Research output: Contribution to journalArticle

controllers
Synthesis
Controller
Controllers
synthesis

Synthesis of optimal H controllers via LQG-based loop shaping design

Yang, C. D., Chang, C. Y. & Sun, Y. P., 1996 Dec 1, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). (Proceedings of the IEEE Conference on Decision and Control; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingChapter

Controllers
Frequency response
29 Citations (Scopus)
Resin transfer molding
Impregnation
Surface tension
Macros
Composite materials
4 Citations (Scopus)
Drag coefficient
Two phase flow
Probability density function
13 Citations (Scopus)

Transient heating and vaporization of a cool dense cloud of droplets in hot supercritical surroundings

Jiang, T. L. & Chiang, W. T., 1996 Mar, In : International Journal of Heat and Mass Transfer. 39, 5, p. 1023-1031 9 p.

Research output: Contribution to journalArticle

transient heating
Vaporization
Heating
High pressure effects
pressure effects
10 Citations (Scopus)

Turbulent flow calculation with orthodox quick scheme

Hsieh, W. D. & Chang, K. C., 1996 Nov, In : Numerical Heat Transfer; Part A: Applications. 30, 6, p. 589-604 16 p.

Research output: Contribution to journalArticle

Turbulent Flow
turbulent flow
Turbulent flow
grids
turbulence models
23 Citations (Scopus)

Vibration suppression experiments on composite laminated plates using an embedded piezoelectric sensor and actuator

Yang, S-M. & Bian, J. J., 1996 Dec 1, In : Smart Materials and Structures. 5, 4, p. 501-507 7 p.

Research output: Contribution to journalArticle

Laminated composites
Actuators
actuators
retarding
vibration
1 Citation (Scopus)

Visualizations of flow over a 50 degree sweep delta wing

Miau, J. J., Liu, W. H. & Chou, J. H., 1996 Dec 1, In : American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. 239, p. 3-6 4 p.

Research output: Contribution to journalArticle

Angle of attack
Visualization
Blow molding
Paint
Vortex flow
2 Citations (Scopus)

μ Synthesis using linear quadratic gaussian controllers

Yang, C. D. & Chang, C. Y., 1996 Jan 1, In : Journal of Guidance, Control, and Dynamics. 19, 4, p. 886-892 7 p.

Research output: Contribution to journalArticle

controllers
Synthesis
Controller
Controllers
synthesis
1997
6 Citations (Scopus)

Analysis of fluidic and mechanical motion in MEMS by using high speed X-ray micro-imaging techniques

Leu, T-S., Lanzillotto, A. M., Amabile, M. & Wildes, R., 1997 Jan 1, p. 149-150. 2 p.

Research output: Contribution to conferencePaper

Fluidics
MEMS
Imaging techniques
X rays
Microstructure
35 Citations (Scopus)

Analysis of the edge effect in resin transfer molding

Young, W. B. & Lai, C. L., 1997 Jan 1, In : Composites Part A: Applied Science and Manufacturing. 28, 9-10, p. 817-822 6 p.

Research output: Contribution to journalArticle

Resin transfer molding
Fibers
Flow simulation
Molding
Flow patterns
70 Citations (Scopus)

Analysis of the response of a strongly nonlinear damped system using a differential transformation technique

Jang, M. J. & Chen, C. L., 1997 Jan 1, In : Applied Mathematics and Computation. 88, 2-3, p. 137-151 15 p.

Research output: Contribution to journalArticle

Runge Kutta methods
Runge-Kutta Methods
Damped
Nonlinear Differential Equations
Nonlinear systems
1 Citation (Scopus)

Annular combustor for miniature jet engines

Ho, W. C., Chao, Y. C. & Shiung, D. B., 1997 Jan 1, In : International Journal of Turbo and Jet Engines. 14, 2, p. 105-115 11 p.

Research output: Contribution to journalArticle

Jet engines
Combustors
Turbojet engines
Fuel injection
Dilution
14 Citations (Scopus)

A phenomenological model for cyclic plasticity

Chiang, D. Y., 1997 Jan, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 119, 1, p. 7-11 5 p.

Research output: Contribution to journalArticle

plastic properties
Plasticity
Hardening
Analytical models
Materials properties
9 Citations (Scopus)

A study of structure and motion in fluidic microsystems

Lanzillotto, A. M., Leu, T-S., Amabile, M., Samtaney, R. & Wildes, R., 1997 Jan 1.

Research output: Contribution to conferencePaper

Microsystems
Fluidics
Nozzles
Flow fields
Recovery
85 Citations (Scopus)

A unified approach to proportional navigation

Yang, C. D. & Yang, C. C., 1997 Dec 1, In : IEEE Transactions on Aerospace and Electronic Systems. 33, 2 PART 1, p. 557-567 11 p.

Research output: Contribution to journalArticle

Navigation
49 Citations (Scopus)

BEM treatment of two-dimensional anisotropic field problems by direct domain mapping

Shiah, Y. C. & Tan, C. L., 1997 Dec 1, In : Engineering Analysis with Boundary Elements. 20, 4, p. 347-351 5 p.

Research output: Contribution to journalArticle

Laplace equation
Boundary element method
Boundary Elements
Method of Characteristics
Coordinate Transformation

Characteristics of low-frequency variations embedded in vortex shedding process

Miau, J-J., Wang, J. T. & Chou, J-H., 1997 Jan 1.

Research output: Contribution to conferencePaper

Vortex shedding
Vortex flow
Circular cylinders
Reynolds number
Experiments
11 Citations (Scopus)

Controller design of a distributed slewing flexible structure-a frequency domain approach

Yang, S. M., Jeng, J. A. & Yang, S. M., 1997 Dec, In : Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 119, 4, p. 809-814 6 p.

Research output: Contribution to journalArticle

slewing
Flexible structures
controllers
Feedback
Controllers