International Bachelor Degree Program on Energy

Research Output

2013

Dynamic analysis of a geared rotor-bearing system with time-varying gear mesh stiffness and pressure angle

Chen, Y. C., Kang, C. H. & Choi, S. T., 2013 Feb 20, Innovation for Applied Science and Technology. p. 461-467 7 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Dynamic simulation of thermal-lag Stirling engines

Cheng, C. H., Yang, H. S., Jhou, B. Y., Chen, Y. C. & Wang, Y. J., 2013 Aug, In : Applied Energy. 108, p. 466-476 11 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)

Effect of a vertical guide plate on the wind loading of an inclined flat plate

Chung, K. M., Chou, C. C., Chang, K. C. & Chen, Y. J., 2013 Nov 1, In : Wind and Structures, An International Journal. 17, 5, p. 537-552 16 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Effects of nitrogen and carbon monoxide concentrations on performance of proton exchange membrane fuel cells with Pt-Ru anodic catalyst

Chen, C. Y., Lai, W. H., Yan, W. M., Chen, C. C. & Hsu, S. W., 2013 Jul 8, In : Journal of Power Sources. 243, p. 138-146 9 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Efficient bem stress analysis of 3d generally anisotropic elastic solidswith stress concentrations and cracks

Shiah, Y-C., Tan, C. L. & Chen, Y. H., 2013 Dec 1, In : CMES - Computer Modeling in Engineering and Sciences. 96, 4, p. 243-257 15 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Enhancement of heat recirculation on the hysteresis effect of catalytic partial oxidation of methane

Chen, W. H., Cheng, Y. C. & Hung, C. I., 2013 Aug 21, In : International Journal of Hydrogen Energy. 38, 25, p. 10394-10406 13 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Fabrication of high wettability gradient on copper substrate

Huang, D. J. & Leu, T. S., 2013 Sep 1, In : Applied Surface Science. 280, p. 25-32 8 p.

Research output: Contribution to journalArticle

50 Citations (Scopus)

Flow and heat transfer of a microjet impinging on a heated chip: Part II - Heat transfer

Chang, C. J., Chen, H. T. & Gau, C., 2013 Jul 1, In : Nanoscale and Microscale Thermophysical Engineering. 17, 2, p. 92-111 20 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Flow and heat transfer of a micro jet impinging on a heated chip: Part I-Micro free and impinging jet flow

Chang, C. J., Shen, C. H. & Gau, C., 2013 Jan 1, In : Nanoscale and Microscale Thermophysical Engineering. 17, 1, p. 50-68 19 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Flow visualization, PIV measurement and CFD calculation for fluid-driven natural cross-ventilation in a scale model

Bangalee, M. Z. I., Miau, J. J., Lin, S. Y. & Yang, J. H., 2013 Aug 23, In : Energy and Buildings. 66, p. 306-314 9 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)

Geometry optimization of thermoelectric coolers using simplified conjugate-gradient method

Huang, Y. X., Wang, X. D., Cheng, C. H. & Lin, D. T. W., 2013 Sep 15, In : Energy. 59, p. 689-697 9 p.

Research output: Contribution to journalArticle

62 Citations (Scopus)

Guide plates on wind uplift of a solar collector model

Chung, K. M., Chang, K. C., Chen, C. K. & Chou, C. C., 2013 Feb, In : Wind and Structures, An International Journal. 16, 2, p. 213-224 12 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Heat conduction analysis in an anisotropic thin film irradiated by an ultrafast pulse laser heating

Tsai, T. W., Lee, Y. M. & Shiah, Y. C., 2013 Jul 15, In : Numerical Heat Transfer; Part A: Applications. 64, 2, p. 132-152 21 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Hydrogen and synthesis gas production from activated carbon and steam via reusing carbon dioxide

Chen, W. H. & Lin, B. J., 2013 Jan, In : Applied Energy. 101, p. 551-559 9 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)

Hydrogen permeation and recovery from H2-N2 gas mixtures by Pd membranes with high permeance

Chen, W. H., Hsia, M. H., Lin, Y. L., Chi, Y. H. & Yang, C. C., 2013 Nov 13, In : International Journal of Hydrogen Energy. 38, 34, p. 14730-14742 13 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
18 Citations (Scopus)

Influence of magnetic forces on the magnetic fluid pendant drop profile

Weng, H. C., Zhang, J. Y. & Chen, C-L., 2013 Dec 18, In : Magnetohydrodynamics. 49, 3-4, p. 372-376 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Influences of geometry and flow pattern on hydrogen separation in a Pd-based membrane tube

Chen, W. H., Syu, W. Z., Hung, C. I., Lin, Y. L. & Yang, C. C., 2013 Jan 24, In : International Journal of Hydrogen Energy. 38, 2, p. 1145-1156 12 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Interface corners in linear anisotropic viscoelastic materials

Kuo, T. L. & Hwu, C., 2013 Mar 1, In : International Journal of Solids and Structures. 50, 5, p. 710-724 15 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Inverse hyperbolic thermoelastic analysis of a functionally graded hollow circular cylinder in estimating surface heat flux and thermal stresses

Yang, Y. C., Chen, W. L., Chou, H. M. & Salazar, J. L. L., 2013 Feb 4, In : International Journal of Heat and Mass Transfer. 60, 1, p. 125-133 9 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Inviscid and viscous interactions in subsonic corner flows

Chung, K. M., Chang, P. H. & Chang, K. C., 2013 Jul 19, In : The Scientific World Journal. 2013, 940862.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Kinetics development and numerical simulation of methane thermocatalytic decomposition at the early stage and steady state

Chen, W. H., Liou, H. J. & Hung, C. I., 2013 May 1, In : International Journal of Hydrogen Energy. 38, 13, p. 5270-5284 15 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Mixed convection heat transfer performance of water-based nanofluids in lid-driven cavity with wavy surfaces

Cho, C. C., Chen, C. L. & Chen, CO. K., 2013 Jun 1, In : International Journal of Thermal Sciences. 68, p. 181-190 10 p.

Research output: Contribution to journalArticle

44 Citations (Scopus)

Modal identification from nonstationary ambient response data using extended random decrement algorithm

Lin, C. S. & Chiang, D. Y., 2013 Mar 11, In : Computers and Structures. 119, p. 104-114 11 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Modeling and simulation for overhead hoist transporter system in computer integrated manufacturing, a case study on the food processing business

Liu, Y. C., Yang, S-M. & Chuang, C. Y., 2013 Oct 10, Advanced Information and Computer Technology in Engineering and Manufacturing, Environmental Engineering. p. 404-408 5 p. (Advanced Materials Research; vol. 765-767).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Natural convection heat transfer and entropy generation in wavy-wall enclosure containing water-based nanofluid

Cho, C. C., Chen, C-L. & Chen, CO. K., 2013 Mar 25, In : International Journal of Heat and Mass Transfer. 61, 1, p. 749-758 10 p.

Research output: Contribution to journalArticle

61 Citations (Scopus)

Numerical and experimental analysis of harmonic distortion in a moving-coil loudspeaker

Chang, C., Wang, C. C., Shiah, Y. C. & Huang, J. H., 2013 Jul 1, In : Communications in Nonlinear Science and Numerical Simulation. 18, 7, p. 1902-1915 14 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
9 Citations (Scopus)

Numerical prediction of CO2 capture process by a single droplet in alkaline spray

Chen, W-H., Tsai, M. H. & Hung, C. I., 2013 Jan 1, In : Applied Energy. 109, p. 125-134 10 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Numerical simulation of blood flow crossing the aortic arch

Kao, R. H., Chen, W. L., Kan, C. D. & Leu, T. S., 2013 Jul 12, ICOT 2013 - 1st International Conference on Orange Technologies. p. 119-122 4 p. 6521172. (ICOT 2013 - 1st International Conference on Orange Technologies).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
8 Citations (Scopus)

Optimal guidance law in quantum mechanics

Yang, C. D. & Cheng, L. L., 2013 Nov 1, In : Annals of Physics. 338, p. 167-185 19 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Problems and methods of numerical and experimental investigation of high rise constructions' aerodynamics in the coastal region "sea-land"

Isaev, S. A., Vatin, N. I., Lebiga, V. A., Zinoviev, V. N., Chang, K-C. & Miau, J-J., 2013 Jan 1, In : Magazine of Civil Engineering. 37, 2

Research output: Contribution to journalArticle

12 Citations (Scopus)

Product sampling during transient continuous countercurrent hydrolysis of canola oil and development of a kinetic model

Wang, W. C., Natelson, R. H., Stikeleather, L. F. & Roberts, W. L., 2013 Nov 1, In : Computers and Chemical Engineering. 58, p. 144-155 12 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Rarefied gas flow through nanoscale tungsten channels

Ozhgibesov, M. S., Leu, T. S. & Cheng, C. H., 2013 May 1, In : Journal of Molecular Graphics and Modelling. 42, p. 32-38 7 p.

Research output: Contribution to journalArticle

Reconstructing interference fringes in slit experiments by complex quantum trajectories

Yang, C-D. & Su, K. C., 2013 May 5, In : International Journal of Quantum Chemistry. 113, 9, p. 1253-1263 11 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Reliable method of a non-insulated double- Pipe heat exchanger

Wong, K. L., Chen, W-L. & Po, L. W., 2013 Feb 20, Innovation for Applied Science and Technology. p. 908-914 7 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rhythm and beauty of cursive drawn by digital Chinese brush

Lin, S. Y. & Kuo, Y. C., 2013 Dec, In : Journal of Aeronautics, Astronautics and Aviation. 45, 4, p. 269-270 2 p.

Research output: Contribution to journalArticle

Scaling issues of micro catalytic reactors

Leu, T-S. & Li, S. Y., 2013 Feb 20, Innovation for Applied Science and Technology. p. 2137-2141 5 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solar thermal market in Taiwan

Chang, K. C., Lin, W. M. & Chung, K. M., 2013 Apr 1, In : Energy Policy. 55, p. 477-482 6 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system

Chen, P. C., Wang, W. C., Roberts, W. L. & Fang, T., 2013 Jan 1, In : Fuel. 103, p. 850-861 12 p.

Research output: Contribution to journalArticle

117 Citations (Scopus)

Streamilining astronautical engineering education through the use of internet-based course and cubesat project

Miau, J-J., Juang, J-C. & Tsai, Y. F., 2013 Jan 1, In : Advances in the Astronautical Sciences. 147, p. 413-423 11 p.

Research output: Contribution to journalConference article

Studies on argon collisions with smooth and rough tungsten surfaces

Ozhgibesov, M. S., Leu, T. S., Cheng, C. H. & Utkin, A. V., 2013 Sep 5, In : Journal of Molecular Graphics and Modelling. 45, p. 45-49 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Study of wheel activated gyroscopic-like motion in spacecraft rotational dynamics

Lin, Y. Y. & Wang, C. T., 2013 Jan 1, In : Procedia Engineering. 67, p. 479-488 10 p.

Research output: Contribution to journalConference article

Study on bump arrangement to accelerate the underfill flow in flip-chip packaging

Lin, S. W. & Young, W-B., 2013 Jan 1, In : IEEE Transactions on Components, Packaging and Manufacturing Technology. 3, 1, p. 40-45 6 p., 6363586.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Taguchi approach for co-gasification optimization of torrefied biomass and coal

Chen, W. H., Chen, C. J. & Hung, C. I., 2013 Sep, In : Bioresource technology. 144, p. 615-622 8 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Technology of micromatrix posts applied to elimination of initial filling and Newton ring in a microcapillary pumped loop

Leu, T. S., Wang, C. T., Yo, J. M. & Lee, Y. C., 2013 Jan 1, In : Journal of Micro/Nanolithography, MEMS, and MOEMS. 12, 3, 033007.

Research output: Contribution to journalArticle

The effective permeability of the underfill flow domain in flip-chip packaging

Yang, C. & Young, W. B., 2013 Feb 1, In : Applied Mathematical Modelling. 37, 3, p. 1177-1186 10 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

The effects of size and shape of iron particles on the microwave absorbing properties of composite absorbers

Yang, R. B., Liang, W. F., Choi, S-T. & Lin, C. K., 2013, In : IEEE Transactions on Magnetics. 49, 7, p. 4180-4183 4 p., 6558948.

Research output: Contribution to journalArticle

16 Citations (Scopus)

The effects of small additions Ga and Al on the microstructure and tensile properties of Sn-Zn based lead-free solders

Chen, K. I., Cheng, S. C. & Cheng, C. H., 2013 Oct 29, Recent Development on Material Science and Environmental Material. p. 265-270 6 p. (Advanced Materials Research; vol. 800).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)