International Bachelor Degree Program on Energy

Research Output 1981 2020

Article
22 Citations (Scopus)

Anisotropic elastic plates with holes/cracks/inclusions subjected to out-of-plane bending moments

Hsieh, M. C. & Hwu, C., 2002 Sep 1, In : International Journal of Solids and Structures. 39, 19, p. 4905-4925 21 p.

Research output: Contribution to journalArticle

anisotropic plates
bending moments
elastic plates
Elastic Plate
Bending moments
10 Citations (Scopus)

Anisotropic heat conduction across an interface crack/defect filled with a thin interstitial medium

Shiah, Y. C. & Shi, Y. X., 2006 May 1, In : Engineering Analysis with Boundary Elements. 30, 5, p. 325-337 13 p.

Research output: Contribution to journalArticle

Interface Crack
Conductance
Heat Conduction
Heat conduction
Defects
7 Citations (Scopus)

Anisotropic heat conduction involving internal arbitrary volume heat generation rate

Shiah, Y. C. & Lin, C. Y., 2002 Nov 1, In : International Communications in Heat and Mass Transfer. 29, 8, p. 1079-1088 10 p.

Research output: Contribution to journalArticle

heat generation
Heat generation
Heat conduction
conductive heat transfer
Boundary element method
23 Citations (Scopus)

Anisotropic plates with various openings under uniform loading or pure bending

Hwu, C., 1990 Sep, In : Journal of Applied Mechanics, Transactions ASME. 57, 3, p. 700-706 7 p.

Research output: Contribution to journalArticle

anisotropic plates
Conformal mapping
Stress concentration
Elasticity
Anisotropy
5 Citations (Scopus)
Iterative methods
Temperature measurement
Insulation
Pipe
Heat transfer
16 Citations (Scopus)
inlet temperature
forced convection
Forced convection
Iterative methods
temperature measurement
Transpiration
Large eddy simulation
Pressure gradient
Turbulent flow
Flow fields
1 Citation (Scopus)

Annular combustor for miniature jet engines

Ho, W. C., Chao, Y. C. & Shiung, D. B., 1997 Jan 1, In : International Journal of Turbo and Jet Engines. 14, 2, p. 105-115 11 p.

Research output: Contribution to journalArticle

Jet engines
Combustors
Turbojet engines
Fuel injection
Dilution
10 Citations (Scopus)

A nonintrusive technique for concentration distribution measurement in enclosures

Gau, C. & Wu, K. H., 1989 Jan 1, In : Experimental Heat Transfer. 2, 3, p. 215-226 12 p.

Research output: Contribution to journalArticle

enclosure
Enclosures
light beams
sulfates
Ions
55 Citations (Scopus)

A nonlinear inverse problem in estimating the heat flux of the disc in a disc brake system

Yang, Y. C. & Chen, W-L., 2011 Jan 1, In : Applied Thermal Engineering. 31, 14-15, p. 2439-2448 10 p.

Research output: Contribution to journalArticle

Inverse problems
Brakes
Heat flux
Temperature measurement
Thermal conductivity
29 Citations (Scopus)

A nonlinear inverse problem in estimating the heat generation in rotary friction welding

Yang, Y. C., Chen, W-L. & Lee, H. L., 2011 Jan 1, In : Numerical Heat Transfer; Part A: Applications. 59, 2, p. 130-149 20 p.

Research output: Contribution to journalArticle

friction welding
Nonlinear Inverse Problems
Friction welding
heat generation
Heat generation
3 Citations (Scopus)

A novel approach to identify the thermal conductivities of a thin anisotropic medium by the boundary element method

Shiah, Y. C., Lee, Y. M. & Huang, T. C., 2014, In : Computers, Materials and Continua. 39, 1, p. 49-71 23 p.

Research output: Contribution to journalArticle

Anisotropic media
Anisotropic Media
Boundary element method
Thermal Conductivity
Boundary Elements
20 Citations (Scopus)
Insulator Elements
Anisotropic media
anisotropic media
Thermal conductivity
thermal conductivity
6 Citations (Scopus)

A novel microfluidic mixer using aperiodic perturbation flows

Cho, C. C., Chen, C. L., Tsai, R. T. & Chen, C. K., 2011 Dec 1, In : Chemical Engineering Science. 66, 23, p. 6159-6167 9 p.

Research output: Contribution to journalArticle

Microfluidics
Perturbation
Scaling Factor
Geometry
Convection-diffusion Equation
5 Citations (Scopus)

A novel planarization process for polysilicon sacrificial layers in a micro-thermal system

Chen, H. R., Gau, C., Dai, B. T. & Tsai, M. S., 2003 Nov 15, In : Sensors and Actuators, A: Physical. 108, 1-3, p. 86-90 5 p.

Research output: Contribution to journalArticle

ditches
Polysilicon
Chemical mechanical polishing
Silicon
silicon films
Discrete time control systems
Controllers
Actuators
Control systems
Poles
25 Citations (Scopus)

A numerical analysis on the performance of a pressurized twin power piston gamma-type Stirling engine

Chen, W-L., Wong, K. L. & Po, L. W., 2012 Oct 1, In : Energy Conversion and Management. 62, p. 84-92 9 p.

Research output: Contribution to journalArticle

Stirling engines
Pistons
Numerical analysis
Engines
Numerical models
22 Citations (Scopus)

A numerical approach of conjugate hydrogen permeation and polarization in a Pd membrane tube

Chen, W-H., Syu, W. Z., Hung, C. I., Lin, Y. L. & Yang, C. C., 2012 Sep 1, In : International Journal of Hydrogen Energy. 37, 17, p. 12666-12679 14 p.

Research output: Contribution to journalArticle

Permeation
Palladium
palladium
Polarization
tubes
7 Citations (Scopus)

A numerical approach of interaction of methane thermocatalytic decomposition and microwave irradiation

Chen, W. H., Liou, H. J. & Hung, C. I., 2013 Oct 8, In : International Journal of Hydrogen Energy. 38, 30, p. 13260-13271 12 p.

Research output: Contribution to journalArticle

Microwave irradiation
beds
Methane
methane
Decomposition
36 Citations (Scopus)

A numerical investigation of multiple flame configurations in convective droplet gasification

Jiang, T-L., Chen, W-H., Tsai, M. J. & Chiu, H. H., 1995 Jan 1, In : Combustion and Flame. 103, 3, p. 221-238 18 p.

Research output: Contribution to journalArticle

gasification
Gasification
flames
Reynolds number
configurations
7 Citations (Scopus)

A numerical simulation of intimal thickening under shear in arteries

Lee, D. & Chiu, J. J., 1992 Jan 1, In : Biorheology. 29, 2-3, p. 337-351 15 p.

Research output: Contribution to journalArticle

Tunica Intima
Arteries
Pathologic Constriction
Growth
32 Citations (Scopus)

A numerical simulation of steady flow fields in a bypass tube

Lee, D., Su, J. M. & Liang, H. Y., 2001 Oct 25, In : Journal of Biomechanics. 34, 11, p. 1407-1416 10 p.

Research output: Contribution to journalArticle

Toes
Steady flow
Flow fields
Hemodynamics
Research Personnel
2 Citations (Scopus)

A numerical study on applying slot-grooved displacer cylinder to a Γ-type medium-temperature-differential stirling engine

Chen, W. L., Chen, C. K., Fang, M. J. & Yang, Y. C., 2018 Feb 1, In : Energy. 144, p. 679-693 15 p.

Research output: Contribution to journalArticle

Stirling engines
Engine cylinders
Heat transfer
Engines
Heat sinks
11 Citations (Scopus)

A numerical study on the effects of moving regenerator to the performance of a β-type Stirling engine

Chen, W. L., Wong, K. L. & Chang, Y. F., 2015 Apr, In : International Journal of Heat and Mass Transfer. 83, p. 499-508 10 p.

Research output: Contribution to journalArticle

Stirling engines
regenerators
Regenerators
engines
Engines
19 Citations (Scopus)

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model

Chen, W-L., Guo, Z. & Chen, C. K., 2004 Jul 1, In : International Journal of Heat and Mass Transfer. 47, 14-16, p. 3431-3439 9 p.

Research output: Contribution to journalArticle

eddy viscosity
heat transfer
Viscosity
tubes
Heat transfer
11 Citations (Scopus)
pipes
heat transfer
Hot Temperature
Pipe
Heat transfer
94 Citations (Scopus)

A numerical study on the performance of miniature thermoelectric cooler affected by Thomson effect

Chen, W. H., Liao, C. Y. & Hung, C. I., 2012 Jan, In : Applied Energy. 89, 1, p. 464-473 10 p.

Research output: Contribution to journalArticle

Cooling
cooling
effect
Microprocessor chips
copper
3 Citations (Scopus)

A parallel VOF IB pressure-correction method for simulation of multiphase flows

Lin, S-Y., Chen, Y. C., Yang, F. L., Chen, C. S. & Hsieh, S. H., 2016 Feb 1, In : Applied Mathematical Modelling. 40, 3, p. 1800-1815 16 p.

Research output: Contribution to journalArticle

Immersed Boundary
Minimal Residual Method
Immersed Boundary Method
Pressure Correction
Multiphase Flow
Stirling engines
Engine cylinders
Heat sinks
Engines
Heat flux
22 Citations (Scopus)
computational fluid dynamics
laminar flow
Laminar flow
Computational fluid dynamics
Pipe
14 Citations (Scopus)

A phenomenological model for cyclic plasticity

Chiang, D. Y., 1997 Jan, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 119, 1, p. 7-11 5 p.

Research output: Contribution to journalArticle

plastic properties
Plasticity
Hardening
Analytical models
Materials properties
21 Citations (Scopus)

A piezoresistive bridge-microcantilever biosensor by CMOS process for surface stress measurement

Yang, S-M. & Chang, C., 2010 Mar 4, In : Sensors and Actuators, B: Chemical. 145, 1, p. 405-410 6 p.

Research output: Contribution to journalArticle

stress measurement
Stress measurement
Surface measurement
bioinstrumentation
Biosensors
17 Citations (Scopus)

A pneumatic model-following control system using a fuzzy adaptive controller

Chen, C-L., Chen, P. C. & Chen, C. K., 1993 Jan 1, In : Automatica. 29, 4, p. 1101-1105 5 p.

Research output: Contribution to journalArticle

Pneumatics
Control systems
Controllers
Control nonlinearities
Industrial robots
1 Citation (Scopus)

Application neural network controller and active mass damper in structural vibration suppression

Chen, C. J. & Yang, S. M., 2014 Jan 1, In : Journal of Intelligent and Fuzzy Systems. 27, 6, p. 2835-2845 11 p.

Research output: Contribution to journalArticle

Neural Network Applications
Vibration Suppression
Damper
Modified Newton Method
Newton-Raphson method
31 Citations (Scopus)

Application of a robust β-pdf treatment to analysis of thermal NO formation in nonpremixed hydrogen-air flame

Chen, C. S., Chang, K. C. & Chen, J. Y., 1994 Sep, In : Combustion and Flame. 98, 4, p. 375-390 16 p.

Research output: Contribution to journalArticle

turbulent flames
closures
Hydrogen
flames
moments
47 Citations (Scopus)

Application of biomass fast pyrolysis part II: The effects that bio-pyrolysis oil has on the performance of diesel engines

Yang, S. I., Hsu, T. C., Wu, C. Y., Chen, K. H., Hsu, Y. L. & Li, Y. H., 2014 Mar 1, In : Energy. 66, p. 172-180 9 p.

Research output: Contribution to journalArticle

Diesel engines
Biomass
Pyrolysis
Emulsification
Coffee
4 Citations (Scopus)

Application of fuzzy adaptive controller in nonlinear process control

Chen, C-L., Chen, P. C. & Chen, CO. K., 1993 Jan 1, In : Chemical Engineering Communications. 123, 1, p. 111-126 16 p.

Research output: Contribution to journalArticle

Process control
Controllers
Control systems
Model predictive control
Linearization
9 Citations (Scopus)

Application of fuzzy logic controllers in single-loop tuning of multivariable sytem design

Chen, C. L. & Chen, P. C., 1991 Oct, In : Computers in Industry. 17, 1, p. 33-41 9 p.

Research output: Contribution to journalArticle

Fuzzy logic
Tuning
Controllers
Multivariable control systems
Controller
3 Citations (Scopus)

Application of genetic algorithm in production scheduling: A case study on the food processing business

Liu, Y. C., Sun, S. H., Yang, S-M. & Chuang, C. Y., 2012 Jan 1, In : Information (Japan). 15, 12 C, p. 6063-6075 13 p.

Research output: Contribution to journalArticle

Food processing
Genetic algorithms
Scheduling
Ovens
Industry
Taguchi methods
Genetic algorithms
Robust control
Numerical methods
Stabilization
7 Citations (Scopus)
Biot number
Heat problems
Laser heating
laser heating
Finite difference method
16 Citations (Scopus)

Application of H Control to pitch autopilot of missiles

Yang, S. M. & Huang, N. H., 1996 Dec 1, In : IEEE Transactions on Aerospace and Electronic Systems. 32, 1, p. 426-433 8 p.

Research output: Contribution to journalArticle

Missiles
Airframes
Controllers
Aerodynamic stability
Derivatives
6 Citations (Scopus)

Application of laser holographic interferometry to temperature measurements in buoyant air jets

Chang, K. C., Huang, J. M. & Tieng, S. M., 1992 Jan 1, In : Journal of thermophysics and heat transfer. 6, 2, p. 377-379 3 p.

Research output: Contribution to journalArticle

Laser interferometry
air jets
Holographic interferometry
laser interferometry
holographic interferometry
1 Citation (Scopus)
Laser interferometry
Holographic interferometry
Temperature measurement
Thermocouples
Chemical analysis
4 Citations (Scopus)

Application of lattice Boltzmann method in free surface flow simulation of micro injection molding

Chen, Y. X., Chang, S. C. & Young, W. B., 2018 Apr 1, In : Computers and Mathematics with Applications. 75, 7, p. 2374-2386 13 p.

Research output: Contribution to journalArticle

Injection Molding
Free Surface Flow
Flow simulation
Lattice Boltzmann Method
Flow Simulation
29 Citations (Scopus)

Application of neural networks in vibrational signature analysis

Elkordy, M. F., Chang, K. C. & Lee, G. C., 1994 Feb, In : Journal of Engineering Mechanics. 120, 2, p. 250-265 16 p.

Research output: Contribution to journalArticle

Neural networks
Condition monitoring
Artificial intelligence
Steel
Monitoring
10 Citations (Scopus)

Application of quantum well-like thermocouple to thermoelectric energy harvester by BiCMOS process

Yang, S. M., Cong, M. & Lee, T., 2011 Mar 1, In : Sensors and Actuators, A: Physical. 166, 1, p. 117-124 8 p.

Research output: Contribution to journalArticle

Harvesters
thermocouples
Thermocouples
thermoelectric generators
Semiconductor quantum wells
5 Citations (Scopus)

Application of residual correction method to laser heating process

Peng, H. S., Chen, C. L. & Li, G. S., 2012 Jan 15, In : International Journal of Heat and Mass Transfer. 55, 1-3, p. 316-324 9 p.

Research output: Contribution to journalArticle

Laser heating
laser heating
Temperature distribution
temperature distribution
Laser beam effects
9 Citations (Scopus)

Application of single mode optical fiber sensors in structural vibration suppression

Yang, S-M. & Chen, C. W., 1996 Jan 1, In : Journal of Intelligent Material Systems and Structures. 7, 1, p. 71-77 7 p.

Research output: Contribution to journalArticle

Intelligent structures
Fiber optic sensors
Single mode fibers
Vibration control
Fibers