International Bachelor Degree Program on Energy

Research Output 1981 2020

2016
48 Citations (Scopus)

Product characteristics from the torrefaction of oil palm fiber pellets in inert and oxidative atmospheres

Chen, W-H., Zhuang, Y. Q., Liu, S. H., Juang, T. T. & Tsai, C. M., 2016 Jan 1, In : Bioresource Technology. 199, p. 367-374 8 p.

Research output: Contribution to journalArticle

Palm oil
liquid
Fibers
atmosphere
oil
32 Citations (Scopus)
Wind turbines
Aerodynamics
Turbomachine blades
Momentum
Turbines
1 Citation (Scopus)

Sliding controller design for servo drive systems subject to mechanical and electrical perturbations

Peng, C-C. & Su, Y. T., 2016 May 19, Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-May. p. 107-112 6 p. 7474734

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Controllers
Linear matrix inequalities
Control systems
3 Citations (Scopus)

Stability analysis of thermal-lag Stirling engines

Yang, H. S. & Cheng, C-H., 2016 Aug 5, In : Applied Thermal Engineering. 106, p. 712-720 9 p.

Research output: Contribution to journalArticle

Stirling engines
Engines
Pistons
Hot Temperature
Heat transfer

Stresses along the hole boundary of unsymmetric composite laminates via boundary element method

Hwu, C. & Chang, H. W., 2016 Jan 1, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boundary element method
Laminates
Insulator Elements
Composite materials
Bending moments
4 Citations (Scopus)

Synthesizing quantum probability by a single chaotic complex-valued trajectory

Yang, C-D. & Wei, C. H., 2016 Mar 15, In : International Journal of Quantum Chemistry. 116, 6, p. 428-437 10 p.

Research output: Contribution to journalArticle

Trajectories
trajectories
Quantum theory
Wave functions
quantum mechanics
28 Citations (Scopus)
Jet fuel
Economic analysis
Feedstocks
Fruits
Costs
1 Citation (Scopus)

The effect of initial pressure on detonation propagation across a mixture

Hsu, Y. C., Chao, Y. C. & Chung, K. M., 2016 Jul 1, In : Advances in Mechanical Engineering. 8, 7, p. 1-9 9 p.

Research output: Contribution to journalArticle

Detonation
Shock waves
Air
1 Citation (Scopus)

The effect of laser treatment of WC-Co coatings on their failure under thermal cycling

Kasterov, A., Shugurov, A., Kazachenok, M., Panin, A., Cheng, C. H. & Chang, I. L., 2016 Nov 10, Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Psakhie, S. G., Fomin, V. M. & Panin, V. E. (eds.). American Institute of Physics Inc., 020083. (AIP Conference Proceedings; vol. 1783).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

coatings
cycles
underwater tests
lasers
HVOF thermal spraying
6 Citations (Scopus)

The effects of sinusoidal leading edge of turbine blades on the power coefficient of horizontal-axis wind turbine (HAWT)

Bai, C. J., Wang, W. C. & Chen, P. W., 2016 Sep 25, In : International Journal of Green Energy. 13, 12, p. 1193-1200 8 p.

Research output: Contribution to journalArticle

Wind turbines
Turbomachine blades
Turbines
Wavelength
Aerodynamics
1 Citation (Scopus)

The impact of water quality on the use of solar water heaters in remote Islands of Taiwan

Fan, K. C., Chang, K. C. & Chung, K. M., 2016 Nov 15, In : Water (Switzerland). 8, 11, 530.

Research output: Contribution to journalArticle

Solar water heaters
heaters
Water Quality
corrosion
Corrosion
22 Citations (Scopus)

Thermodynamic approach and comparison of two-step and single step DME (dimethyl ether) syntheses with carbon dioxide utilization

Chen, W. H., Hsu, C. L. & Wang, X. D., 2016 Aug 15, In : Energy. 109, p. 326-340 15 p.

Research output: Contribution to journalArticle

Ethers
Carbon dioxide
Thermodynamics
Temperature
Methanol
1 Citation (Scopus)

Thermoelastic analysis of 3D generally anisotropic bodies by the boundary element method

Shiah, Y-C. & Tan, C. L., 2016 Mar 3, In : European Journal of Computational Mechanics. 25, 1-2, p. 91-108 18 p.

Research output: Contribution to journalArticle

Thermoelastic
Boundary element method
Boundary Elements
Boundary integral equations
Boundary Integral Equations
7 Citations (Scopus)

Two-phase flow pattern based theoretical study of loop heat pipes

Weng, C. Y. & Leu, T-S., 2016 Apr 5, In : Applied Thermal Engineering. 98, p. 228-237 10 p.

Research output: Contribution to journalArticle

Heat pipes
Two phase flow
Flow patterns
Surface tension
Condensation
7 Citations (Scopus)

Verification of the Shear-Stress Transfer Model and its Modifications in the Calculation of a Turbulent Flow Around a Semicircular Airfoil with a Zero Angle of Attack

Isaev, S. A., Baranov, P. A., Zhukova, Y. V., Kalinin, E. I. & Miau, J. J., 2016 Jan 1, In : Journal of Engineering Physics and Thermophysics. 89, 1, p. 73-89 17 p.

Research output: Contribution to journalArticle

zero angle of attack
airfoils
Angle of attack
Airfoils
turbulent flow

具壓電構造之微型致冷裝置

Cheng, C-H., 2016 Aug 16, Patent No. I563234

Research output: Patent

再生器及其製造方法

Cheng, C-H., 2016 Aug 16, Patent No. I591253

Research output: Patent

2015
4 Citations (Scopus)

3D Elastostatic Boundary Element Analysis of thin bodies by Integral Regularizations

Shiah, Y. C., 2015 Oct 1, In : Journal of Mechanics. 31, 5, p. 533-543 11 p.

Research output: Contribution to journalArticle

elastostatics
thin bodies
Elastostatics
Boundary Elements
Elasticity
20 Citations (Scopus)

A CFD parametric study on the performance of a low-temperature-differential γ-type Stirling engine

Chen, W-L., Yang, Y. C. & Salazar, J. L., 2015 Dec 1, In : Energy Conversion and Management. 106, p. 635-643 9 p.

Research output: Contribution to journalArticle

Stirling engines
Computational fluid dynamics
Engines
Temperature
Pistons
4 Citations (Scopus)
Immersed Boundary Method
incompressible flow
Incompressible flow
ghosts
Incompressible Flow

A cost-effective search of collision pairs in Lagrangian particle tracking method

Lin, J. H. & Chang, K-C., 2015 Jan 1.

Research output: Contribution to conferencePaper

Channel flow
Equations of motion
Costs
3 Citations (Scopus)
finite volume method
Piecewise Polynomials
Finite volume method
Finite Volume Method
Diffusion equation
6 Citations (Scopus)

Analysis of convective heat transfer improved impeller stirred tanks by the lattice Boltzmann method

Chang, S. C., Chen, C. L. & Cheng, S. C., 2015 Sep 1, In : International Journal of Heat and Mass Transfer. 87, p. 568-575 8 p.

Research output: Contribution to journalArticle

convective heat transfer
stirring
Heat transfer
Angular velocity
Flow structure
10 Citations (Scopus)

Analysis of extremal lift behavior of a semicircular airfoil in a turbulent airflow at a near-zero angle of attack

Isaev, S. A., Miau, J. J., Sudakov, A. G. & Usachov, A. E., 2015 Aug 4, In : Technical Physics Letters. 41, 8, p. 737-739 3 p.

Research output: Contribution to journalArticle

zero angle of attack
airfoils
allowances
shear stress
curvature
11 Citations (Scopus)

Analyzing adsorption characteristics of CO 2 , N 2 and H 2 O in MCM-41 silica by molecular simulation

Chang, S. C., Chien, S. Y., Chen, C-L. & Chen, C. K., 2015 Mar 15, In : Applied Surface Science. 331, p. 225-233 9 p., 29521.

Research output: Contribution to journalArticle

Multicarrier modulation
Carbon Monoxide
Silicon Dioxide
Silica
Adsorption
31 Citations (Scopus)

An energy analysis of torrefaction for upgrading microalga residue as a solid fuel

Chen, W. H., Huang, M. Y., Chang, J. S., Chen, C. Y. & Lee, W. J., 2015 Jun 1, In : Bioresource technology. 185, p. 285-293 9 p.

Research output: Contribution to journalArticle

microalga
energy efficiency
Energy efficiency
Energy utilization
energy
20 Citations (Scopus)

An experimental study on single-step dimethyl ether (DME) synthesis from hydrogen and carbon monoxide under various catalysts

Huang, M. H., Lee, H. M., Liang, K. C., Tzeng, C. C. & Chen, W. H., 2015 Oct 19, In : International Journal of Hydrogen Energy. 40, 39, p. 13583-13593 11 p.

Research output: Contribution to journalArticle

Carbon monoxide
carbon monoxide
Ethers
ethers
catalysts
20 Citations (Scopus)
Insulator Elements
Anisotropic media
anisotropic media
Thermal conductivity
thermal conductivity
11 Citations (Scopus)

A numerical study on the effects of moving regenerator to the performance of a β-type Stirling engine

Chen, W. L., Wong, K. L. & Chang, Y. F., 2015 Apr, In : International Journal of Heat and Mass Transfer. 83, p. 499-508 10 p.

Research output: Contribution to journalArticle

Stirling engines
regenerators
Regenerators
engines
Engines

A pressure-based lattice Boltzmann method for sedimentation and fluidization problems

Lin, S. Y. & Tai, Y. H., 2015 Jan 1, In : Civil-Comp Proceedings.

Research output: Contribution to journalConference article

Fluidization
Sedimentation
Distribution functions
Pressure distribution
Incompressible flow

A Pressure-Based lattice boltzmann method for sedimentation and fluidization problems

Lin, S. Y. & Tai, Y. H., 2015 Jan 1, In : Civil-Comp Proceedings. 108

Research output: Contribution to journalArticle

Fluidization
Sedimentation
Distribution functions
Pressure distribution
Incompressible flow
380 Citations (Scopus)

A state-of-the-art review of biomass torrefaction, densification and applications

Chen, W. H., Peng, J. & Bi, X. T., 2015 Apr, In : Renewable and Sustainable Energy Reviews. 44, p. 847-866 20 p.

Research output: Contribution to journalReview article

Densification
Biomass
Gasification
Heating
Sawdust
3 Citations (Scopus)

A two-dimensional simulation model for the molded underfill process in flip chip packaging

Guo, X. R. & Young, W-B., 2015 Jul 23, In : Journal of Mechanical Science and Technology. 29, 7, p. 2967-2974 8 p.

Research output: Contribution to journalArticle

Packaging
Sheet molding compounds
Substrates
Soldering alloys
Numerical models
1 Citation (Scopus)

A unified wall-boundary condition for the lattice boltzmann method and its application to force evaluation

Lin, S-Y., Chin, Y. H., Yang, F. L., Lin, J. F., Hu, J. J., Chen, C. S. & Hsieh, S. H., 2015 Feb 1, In : Journal of Mechanics. 31, 1, p. 55-68 14 p.

Research output: Contribution to journalArticle

Lattice Boltzmann Method
Boundary conditions
boundary conditions
evaluation
Evaluation
2 Citations (Scopus)

Boundary element analysis of thin anisotropic structures by a self-regularization scheme

Shiah, Y. C., Tan, C. L. & Chan, L. D., 2015 Jan 1, In : CMES - Computer Modeling in Engineering and Sciences. 109, 1, p. 15-33 19 p.

Research output: Contribution to journalArticle

Boundary integral equations
Boundary Elements
Elastostatics
Elasticity
Regularization
33 Citations (Scopus)

Burning characteristics of pulverized coal within blast furnace raceway at various injection operations and ways of oxygen enrichment

Du, S. W., Yeh, C. P., Chen, W-H., Tsai, C. H. & Lucas, J. A., 2015 Mar 1, In : Fuel. 143, p. 98-106 9 p.

Research output: Contribution to journalArticle

Coal
Blast furnaces
Oxygen
Coal combustion
Ignition
16 Citations (Scopus)

Computational fluid dynamics analysis of the vertical axis wind turbine blade with tubercle leading edge

Bai, C. J., Lin, Y. Y., Lin, S-Y. & Wang, W-C., 2015 May 1, In : Journal of Renewable and Sustainable Energy. 7, 3, 033124.

Research output: Contribution to journalArticle

Wind turbines
Dynamic analysis
Turbomachine blades
Computational fluid dynamics
Turbines
18 Citations (Scopus)

Condensation heat transfer enhancement by surface modification on a monolithic copper heat sink

Huang, D. J. & Leu, T-S., 2015 Jan 22, In : Applied Thermal Engineering. 75, p. 908-917 10 p.

Research output: Contribution to journalArticle

Heat sinks
Surface treatment
Condensation
Heat transfer
Copper
4 Citations (Scopus)

Coupled stretching-bending analysis of laminated plates with corners via boundary elements

Hwu, C. & Chang, H. W., 2015 Feb 1, In : Composite Structures. 120, p. 300-314 15 p.

Research output: Contribution to journalArticle

Insulator Elements
Stretching
Laminates
Green's function
Tensors

Dynamic spur geared rotor analysis of a multi-shaft turbine with gear parameters

Shiau, T. N., Wang, C. R., Liu, D. S., Wang, W. C. & Hsu, W. C., 2015 Jan 1, Structures and Dynamics. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 7A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Turbines
Rotors
Natural frequencies
Spur gears
5 Citations (Scopus)

Effects of Flue Gas Addition on the Premixed Oxy-methane Flames in Atmospheric Condition

Li, Y. H., Chen, G. B. & Chao, Y. C., 2015 Jan 1, In : Energy Procedia. 75, p. 3054-3059 6 p.

Research output: Contribution to journalConference article

Flue gases
Methane
Gases
Chemical reactions
Inert gases
14 Citations (Scopus)

Effects of flue gas recirculation on the premixed oxy-methane flames in atmospheric condition

Li, Y. H., Chen, G. B., Lin, Y. C. & Chao, Y. C., 2015 Sep 1, In : Energy. 89, p. 845-857 13 p., 7783.

Research output: Contribution to journalArticle

Flue gases
Methane
Chemical reactions
Gases
Adiabatic flame temperature

Effects of Fuel Impingement-Cooling on the Combustion Flow in a Small Bipropellant Liquid Rocket Thruster

Lee, Y. W. & Jiang, T-L., 2015 Aug 12, In : Journal of Mechanics. 31, 2, p. 161-170 10 p.

Research output: Contribution to journalArticle

liquid rocket propellants
impingement
Rockets
rockets
monomethylhydrazines

Effects of micro-channel geometry and surface modification on heat transfer within an evaporator

Leu, T-S., Wang, C. T. & Huang, N. J., 2015 Jan 1, In : Journal of Applied Science and Engineering. 18, 1, p. 25-32 8 p.

Research output: Contribution to journalArticle

Evaporators
Surface treatment
Heat transfer
Geometry
Fluids
1 Citation (Scopus)

Energy usage of residents on offshore Islands in Taiwan

Lu, S. C., Chang, K-C., Lin, W. M. & Chung, K-M., 2015 Jan 1, In : Sustainability (Switzerland). 7, 6, p. 6652-6664 13 p.

Research output: Contribution to journalArticle

Domestic appliances
Taiwan
resident
energy
Washing machines
Shape optimization
Heat conduction
conductive heat transfer
topology
optimization

Estimation of strength and fracture toughness for nanomaterials

Hwu, C. & Yeh, Y. K., 2015 Jan 1.

Research output: Contribution to conferencePaper

Nanostructured materials
Fracture toughness
Strain energy
Energy release rate
Potential energy functions
15 Citations (Scopus)

Estimation of surface heat flux and temperature distributions in a multilayer tissue based on the hyperbolic model of heat conduction

Lee, H. L., Chen, W-L., Chang, W. J. & Yang, Y. C., 2015 Oct 26, In : Computer Methods in Biomechanics and Biomedical Engineering. 18, 14, p. 1525-1534 10 p.

Research output: Contribution to journalArticle

Heat conduction
Heat flux
Multilayers
Temperature distribution
Hot Temperature
3 Citations (Scopus)
stamping
Stamping
fuel cell
fuel cells
Fuel cells