International Bachelor Degree Program on Energy

Research Output 1981 2020

2015

Wake characteristics of a model wind turbine and an actuator disk model

Miau, J-J., Lin, S. A., Fong, J. H., Lin, C. C., Leu, T-S., Wang, T-C. & Tseng, C-C., 2015 Sep 1, In : Journal of Aeronautics, Astronautics and Aviation. 47, 3, p. 307-314 8 p.

Research output: Contribution to journalArticle

actuator disks
Actuator disks
wind turbines
wind turbine
wakes

Water quality on solar water heaters in Remote Islands

Fan, K. C., Chang, K-C. & Chung, K-M., 2015, ISES Solar World Congress 2015, Conference Proceedings. International Solar Energy Society, p. 1046-1055 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solar water heaters
Water quality
Corrosion
Water
Groundwater
2014
31 Citations (Scopus)
Stirling engines
computational fluid dynamics
engines
Computational fluid dynamics
heat transfer
26 Citations (Scopus)
Stirling engines
Computational fluid dynamics
Heat transfer
Engines
Heat flux
12 Citations (Scopus)

A method integrating optimal algorithm and FEM on CMOS residual stress

Chuang, W. C., Lin, D. T. W., Hu, Y. C., Lee, H. L., Cheng, C. H., Chang, P. Z. & Quyen, N. B., 2014 Apr, In : Journal of Mechanics. 30, 2, p. 123-128 6 p.

Research output: Contribution to journalArticle

Residual Stress
Optimal Algorithm
residual stress
Residual stresses
CMOS
3 Citations (Scopus)

Amodeling study on particledispersion inwall-bounded turbulent flows

Lin, J. H. & Chang, K-C., 2014 Jan 1, In : Advances in Applied Mathematics and Mechanics. 6, 6, p. 764-782 19 p.

Research output: Contribution to journalArticle

Turbulent Flow
Turbulent flow
Surface roughness
Turbulence
Collision
10 Citations (Scopus)

A model integrating fuzzy AHP with QFD for assessing technical factors in aviation safety

Chen, C. J., Yang, S-M. & Chang, S. C., 2014 Jan 1, In : International Journal of Machine Learning and Cybernetics. 5, 5, p. 761-774 14 p.

Research output: Contribution to journalArticle

Quality function deployment
Analytic hierarchy process
Aviation
Engines
Propellers
6 Citations (Scopus)
elastostatics
Boundary integral equations
Boundary element method
integral equations
Elasticity
26 Citations (Scopus)

An experimental study on the performance of the moving regenerator for a γ-type twin power piston Stirling engine

Chen, W. L., Wong, K. L. & Chen, H. E., 2014 Jan 1, In : Energy Conversion and Management. 77, p. 118-128 11 p.

Research output: Contribution to journalArticle

Stirling engines
Regenerators
Pistons
Engines
Wire
3 Citations (Scopus)

An extended time series algorithm for modal identification from nonstationary ambient response data only

Lin, C. S., Chiang, D. Y. & Tseng, T. C., 2014 Jan 1, In : Mathematical Problems in Engineering. 2014, 391815.

Research output: Contribution to journalArticle

Time series
Linear systems
Non-stationary Time Series
Time-varying Parameters
Stationary Process
16 Citations (Scopus)

An inverse hyperbolic heat conduction problem in estimating base heat flux of two-dimensional cylindrical pin fins

Chen, W-L., Chou, H. M., Lee, H. L. & Yang, Y. C., 2014 Mar 1, In : International Communications in Heat and Mass Transfer. 52, p. 90-96 7 p.

Research output: Contribution to journalArticle

fins
Heat conduction
conductive heat transfer
Heat flux
heat flux
4 Citations (Scopus)

A nonlinear non-dimensional dynamic model for free piston thermal-lag stirling engine

Yang, H. S. & Cheng, C. H., 2014 Jan 1, In : Energy Procedia. 61, p. 2662-2665 4 p.

Research output: Contribution to journalConference article

Stirling engines
Pistons
Dynamic models
Engines
Equations of motion
3 Citations (Scopus)

A novel approach to identify the thermal conductivities of a thin anisotropic medium by the boundary element method

Shiah, Y. C., Lee, Y. M. & Huang, T. C., 2014, In : Computers, Materials and Continua. 39, 1, p. 49-71 23 p.

Research output: Contribution to journalArticle

Anisotropic media
Anisotropic Media
Boundary element method
Thermal Conductivity
Boundary Elements
1 Citation (Scopus)

Application neural network controller and active mass damper in structural vibration suppression

Chen, C. J. & Yang, S. M., 2014 Jan 1, In : Journal of Intelligent and Fuzzy Systems. 27, 6, p. 2835-2845 11 p.

Research output: Contribution to journalArticle

Neural Network Applications
Vibration Suppression
Damper
Modified Newton Method
Newton-Raphson method
47 Citations (Scopus)

Application of biomass fast pyrolysis part II: The effects that bio-pyrolysis oil has on the performance of diesel engines

Yang, S. I., Hsu, T. C., Wu, C. Y., Chen, K. H., Hsu, Y. L. & Li, Y. H., 2014 Mar 1, In : Energy. 66, p. 172-180 9 p.

Research output: Contribution to journalArticle

Diesel engines
Biomass
Pyrolysis
Emulsification
Coffee
2 Citations (Scopus)

Application of genetic algorithm and fuzzy gantt chart to project scheduling with resource constraints

Liu, Y. C., Gao, H. M., Yang, S. M. & Chuang, C. Y., 2014 Jan 1, Intelligent Computing Methodologies - 10th International Conference, ICIC 2014, Proceedings. Springer Verlag, p. 241-252 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8589 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Project Scheduling
Resource Constraints
Chart
Genetic algorithms
Scheduling
18 Citations (Scopus)

A study of thermal pyrolysis for castor meal using the Taguchi method

Chen, G. L., Chen, G. B., Li, Y. H. & Wu, W. T., 2014 Jul 15, In : Energy. 71, p. 62-70 9 p.

Research output: Contribution to journalArticle

Taguchi methods
Pyrolysis
Heating rate
Flow rate
Nitrogen
5 Citations (Scopus)

Bifurcation and chaotic analysis of aeroelastic systems

Wang, C. C., Chen, C-L. & Yau, H. T., 2014 Jan 1, In : Journal of Computational and Nonlinear Dynamics. 9, 2, 021004.

Research output: Contribution to journalArticle

Bifurcation
Differential Transformation Method
Dynamic Behavior
Aircraft
Power spectrum
2 Citations (Scopus)

BIRDY: An interplanetary CubeSat to collect radiation data on the way to Mars and back to prepare the future manned missions

Segret, B., Vannitsen, J., Agnan, M., Porquet, A., Sleimi, O., Deleflie, F., Miau, J-J., Juang, J-C. & Wang, K., 2014 Jan 1, Modeling, Systems Engineering, and Project Management for Astronomy VI. SPIE, 91501N. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9150).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mars
mars
Radiation
Trajectories
radiation
9 Citations (Scopus)
Vibration Analysis
Vibration analysis
Boundary element method
Boundary Elements
Crack

Burning off of carbon deposit removal at stagnant boundary layer

Chang, K-C., Hsu, U. K. & Hang, J. G., 2014 Jan 1, In : Procedia Engineering. 79, p. 305-312 8 p.

Research output: Contribution to journalConference article

Coke ovens
Boundary layers
Deposits
Carbon
Air intakes
14 Citations (Scopus)

CFD (computational fluid dynamics)-based optimal design of a micro-reformer by integrating computational a fluid dynamics code using a simplified conjugate-gradient method

Cheng, C. H., Huang, Y. X., King, S. C., Lee, C. I. & Leu, C. H., 2014 Jun 1, In : Energy. 70, p. 355-365 11 p.

Research output: Contribution to journalArticle

Conjugate gradient method
Fluid dynamics
Computational fluid dynamics
Steam reforming
Channel flow
16 Citations (Scopus)

Characteristic studies of a PBI/H3PO4 high temperature membrane PEMFC under simulated reformate gases

Chen, C. Y., Lai, W. H., Chen, Y. K. & Su, S. S., 2014 Aug 22, In : International Journal of Hydrogen Energy. 39, 25, p. 13757-13762 6 p.

Research output: Contribution to journalArticle

Proton exchange membrane fuel cells (PEMFC)
fuel cells
Fuel cells
poisoning
Gas fuel purification
19 Citations (Scopus)

Characterization of catalytic partial oxidation of methane with carbon dioxide utilization and excess enthalpy recovery

Chen, W. H. & Lin, S. C., 2014 Oct 5, In : Applied Energy. 162, p. 1141-1152 12 p.

Research output: Contribution to journalArticle

enthalpy
Enthalpy
Carbon dioxide
Methane
carbon dioxide
50 Citations (Scopus)

Characterization of solid and liquid products from bamboo torrefaction

Chen, W. H., Liu, S. H., Juang, T. T., Tsai, C. M. & Zhuang, Y. Q., 2014 Oct 5, In : Applied Energy. 160, p. 829-835 7 p.

Research output: Contribution to journalArticle

liquid
Liquids
Dewatering
dewatering
Acids
2 Citations (Scopus)

Characterization of transient CO2 transport in two convecting aerosol droplets in Tandem

Chen, W. H., Tsai, M. H. & Hung, C. I., 2014 Feb 1, In : Aerosol and Air Quality Research. 14, 1, p. 207-219 13 p.

Research output: Contribution to journalArticle

Aerosols
droplet
aerosol
spacing
Carbon Dioxide
21 Citations (Scopus)

CO2 conversion for syngas production in methane catalytic partial oxidation

Chen, W-H., 2014 Mar 1, In : Journal of CO2 Utilization. 5, p. 1-9 9 p.

Research output: Contribution to journalArticle

Methane
methane
oxidation
Oxidation
Reforming reactions

Control of bubble growth by using virtual chamber neck in micro nozzle channel

Leu, T. S. & Lin, C. F., 2014 Jan 1, AEROTECH V: Progressive Aerospace Research. Romli, F. I., Majid, D. L., Mustapha, F., Romli, F. I., Majid, D. L., Mustapha, F., Varatharajoo, R., Romli, F. I., Ahmad, K. A., Majid, D. L., Mustapha, F., Varatharajoo, R., Romli, F. I., Ahmad, K. A., Majid, D. L. & Mustapha, F. (eds.). Trans Tech Publications Ltd, p. 431-436 6 p. (Applied Mechanics and Materials; vol. 629).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nozzles
Imaging systems
Liquids
5 Citations (Scopus)

Detumbling of a rigid spacecraft via torque wheel assisted gyroscopic motion

Lin, Y-Y. & Wang, C. T., 2014 Jan 1, In : Acta Astronautica. 93, p. 1-12 12 p.

Research output: Contribution to journalArticle

Spacecraft
Wheels
Torque
Angular momentum
Momentum
1 Citation (Scopus)

Development of a self-organized neuro-fuzzy model by using genetic algorithm for system identification

Chen, C. J., Yang, S-M. & Lin, S. G., 2014 Dec 1, In : Journal of Aeronautics, Astronautics and Aviation. 46, 4, p. 281-290 10 p.

Research output: Contribution to journalArticle

system identification
fuzzy mathematics
membership functions
genetic algorithms
genetic algorithm
5 Citations (Scopus)
Integral Transformation
Thermoelasticity
Surface integral
Boundary element method
Boundary Elements
2 Citations (Scopus)

Discrete transition of flow over a circular cylinder at precritical Reynolds numbers

Miau, J-J., Fang, C. H., Chen, M. C., Wang, T-C. & Lai, Y. H., 2014 Nov 1, In : AIAA journal. 52, 11, p. 2576-2586 11 p.

Research output: Contribution to journalArticle

Circular cylinders
Reynolds number
Strouhal number
Vortex shedding
Pressure measurement
1 Citation (Scopus)

Distribution of solar diffuse fraction in Taiwan

Kuo, C. W., Chang, W. C. & Chang, K-C., 2014 Jan 1, In : Energy Procedia. 57, p. 1120-1129 10 p.

Research output: Contribution to journalConference article

Sea level
Solar radiation
Mean square error
Error analysis
Interpolation
1 Citation (Scopus)

Dynamic analysis of a spur geared rotor-bearing system with nonlinear gear mesh stiffness

Chen, Y. C., Kang, C. H. & Choi, S. T., 2014 Jan 1, Advances in Manufacturing Science and Engineering V. Trans Tech Publications Ltd, p. 853-861 9 p. (Advanced Materials Research; vol. 945-949).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Dynamic analysis
Gears
Rotors
Stiffness
1 Citation (Scopus)

Effect of Reynolds number on compressible convex-corner flows

Chung, K. M., Chang, P. H. & Chang, K. C., 2014 Oct 1, In : Advances in Aircraft and Spacecraft Science. 1, 4, p. 443-454 12 p.

Research output: Contribution to journalArticle

Reynolds number
Boundary layers
Transonic flow

Effects of Ga addition on the wetting properties and tensile properties of Sn-Zn-Ag solder alloys

Chen, K. I., Cheng, C. H., Wu, S., Jiang, Y. L. & Cheng, T. C., 2014 Dec 1, In : Indian Journal of Engineering and Materials Sciences. 21, 6, p. 621-627 7 p.

Research output: Contribution to journalArticle

Tensile properties
Soldering alloys
Wetting
Tensile strength
Mechanical properties
11 Citations (Scopus)

Efficiency improvement of organic solar cells with imprint of nanostructures by capillary force lithography

Cheng, Y. S. & Gau, C., 2014 Jan 1, In : Solar Energy Materials and Solar Cells. 120, PART B, p. 566-571 6 p.

Research output: Contribution to journalArticle

Lithography
Nanostructures
Nanorods
Conversion efficiency
Solar cells

Electrochemical characteristics of a PEMFC stack under different temperatures and humidity levels

Huang, K. P., Chen, C. Y. & Lai, W-H., 2014 Jan 1, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, p. 1229-1234 6 p. (20th World Hydrogen Energy Conference, WHEC 2014; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Atmospheric humidity
Diffusion in gases
Temperature
Fuel cells
10 Citations (Scopus)

Electromagnetic and microwave absorbing properties of raw and milled FeSiCr particles

Yang, R. B., Liang, W. F., Chen, C. C. & Choi, S-T., 2014 May 7, In : Journal of Applied Physics. 115, 17, 17B536.

Research output: Contribution to journalArticle

electromagnetism
microwaves
tangents
flakes
high aspect ratio
6 Citations (Scopus)

Electronic quantum trajectories in a quantum dot

Yang, C-D. & Huang, S. M., 2014 Jul 15, In : International Journal of Quantum Chemistry. 114, 14, p. 920-930 11 p.

Research output: Contribution to journalArticle

Quantum electronics
quantum electronics
Semiconductor quantum dots
quantum dots
Trajectories
12 Citations (Scopus)

Enhanced performance of polymer solar cells with imprinted nanostructures on the active layer

Chen, B. C., Cheng, Y. S., Gau, C. & Lee, Y-C., 2014 Aug 1, In : Thin Solid Films. 564, p. 384-389 6 p.

Research output: Contribution to journalArticle

Nanostructures
Solar cells
solar cells
polymers
Fullerenes
4 Citations (Scopus)

Estimation of energy absorption rate and temperature distributions in short-pulse laser heating of metals with a dual-phase-lag model

Lee, H. L., Chen, W-L., Chang, W. J. & Yang, Y. C., 2014 Apr 1, In : Applied Thermal Engineering. 65, 1-2, p. 352-360 9 p.

Research output: Contribution to journalArticle

Laser heating
Energy absorption
Laser pulses
Temperature distribution
Temperature measurement

Experimental study of different thermal management concepts for syngas production by dry auto-thermal reforming

Lai, M. P., Horng, R. F., Lai, W. H., Chen, C. Y., Su, S. S. & Liao, C. H., 2014 Jan 1, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, p. 1538-1543 6 p. (20th World Hydrogen Energy Conference, WHEC 2014; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reforming reactions
Temperature control
Porous materials
Methane
Thermal insulation
11 Citations (Scopus)
Carbon Nanotubes
Graphite
Graphene
Carbon nanotubes
Mechanical properties

Fabrication of bamboo fiber reinforced polylactide biocomposites

Young, W-B., Tian, B. Y. & Tsau, Y. C., 2014 Jan 1, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 277-284 8 p. (Lecture Notes in Mechanical Engineering; vol. 0).

Research output: Chapter in Book/Report/Conference proceedingChapter

Bamboo
Fabrication
Fibers
Composite materials
Reinforcement
15 Citations (Scopus)

Flow-field design for improving hydrogen recovery in a palladium membrane tube

Chen, W. H., Lin, C. H. & Lin, Y. L., 2014 Dec 5, In : Journal of Membrane Science. 472, p. 45-54 10 p.

Research output: Contribution to journalArticle

Palladium
baffles
palladium
Hydrogen
Flow fields
14 Citations (Scopus)

Fractal channel design in a micro methanol steam reformer

Huang, Y. X., Jang, J. Y. & Cheng, C. H., 2014 Feb 4, In : International Journal of Hydrogen Energy. 39, 5, p. 1998-2007 10 p.

Research output: Contribution to journalArticle

steam
Fractals
fractals
Methanol
Steam
73 Citations (Scopus)

Gasification performances of raw and torrefied biomass in a downdraft fixed bed gasifier using thermodynamic analysis

Kuo, P. C., Wu, W. & Chen, W. H., 2014 Jan 30, In : Fuel. 117, PARTB, p. 1231-1241 11 p.

Research output: Contribution to journalArticle

Bamboo
Gasification
Biomass
Thermodynamics
Gases
34 Citations (Scopus)

Geometric effect on cooling power and performance of an integrated thermoelectric generation-cooling system

Chen, W. H., Wang, C. C. & Hung, C. I., 2014 Nov, In : Energy Conversion and Management. 87, p. 566-575 10 p.

Research output: Contribution to journalArticle

Heat convection
Contact resistance
Cooling systems
Boundary conditions
Cooling