International Bachelor Degree Program on Energy

Research Output 1981 2020

Article
13 Citations (Scopus)

Design consideration and fabrication of a microchannel system containing a set of heaters and an array of temperature sensors

Liu, C. W., Gau, C., Liu, C. G. & Yang, C. S., 2005 Aug 26, In : Sensors and Actuators, A: Physical. 122, 2, p. 177-183 7 p.

Research output: Contribution to journalArticle

temperature sensors
Temperature sensors
microchannels
Microchannels
heaters
46 Citations (Scopus)

Design for geometric parameters of PEM fuel cell by integrating computational fluid dynamics code with optimization method

Cheng, C-H., Lin, H. H. & Lai, G. J., 2007 Mar 20, In : Journal of Power Sources. 165, 2, p. 803-813 11 p.

Research output: Contribution to journalArticle

Proton exchange membrane fuel cells (PEMFC)
computational fluid dynamics
fuel cells
Computational fluid dynamics
Gases
2 Citations (Scopus)
charge flow devices
Software packages
Pressure drop
Optimization Methods
Heating

Design of a near-optimal adaptive filter in digital signal processor for active noise control

Yang, S-M., Lee, K. F. & Tsai, S. E., 2008 Feb 1, In : International Journal of Adaptive Control and Signal Processing. 22, 1, p. 43-54 12 p.

Research output: Contribution to journalArticle

Active noise control
Digital signal processors
Adaptive filters
Controllers
Feedforward control
15 Citations (Scopus)

Design of a novel hydrogen-syngas catalytic mesh combustor

Li, Y. H., Hsu, H. W., Lien, Y. S. & Chao, Y. C., 2009 Oct 1, In : International Journal of Hydrogen Energy. 34, 19, p. 8322-8328 7 p.

Research output: Contribution to journalArticle

wire cloth
synthesis gas
combustion chambers
Combustors
mesh
2 Citations (Scopus)

Design of dynamic sliding mode controller to aeroelastic systems

Chen, C. L., Chang, C. W. & Yau, H. T., 2012 Jan 1, In : Applied Mathematics and Information Sciences. 6, 1, p. 89-98 10 p.

Research output: Contribution to journalArticle

Control surfaces
Sliding Mode
Controller
Controllers
Sliding mode control
8 Citations (Scopus)
magnetic bearings
Magnetic bearings
experiment design
Design of experiments
rotors
27 Citations (Scopus)
Backstepping
Chaotic systems
Uncertain Systems
Sliding Mode
Chaotic System
121 Citations (Scopus)

Design of heat sink for improving the performance of thermoelectric generator using two-stage optimization

Wang, C. C., Hung, C. I. & Chen, W. H., 2012 Mar, In : Energy. 39, 1, p. 236-245 10 p.

Research output: Contribution to journalArticle

Heat sinks
Cooling systems
Air
Energy conversion
Numerical methods

Design of in-situ vibration and shape controller on smart structures

Yang, S. M., Liu, Y. C. & Liu, K. C., 2006 Jun 1, In : Hangkong Taikong ji Minhang Xuekan/Journal of Aeronautics, Astronautics and Aviation. 38 A, 2, p. 125-130 6 p.

Research output: Contribution to journalArticle

smart structures
Intelligent structures
vibration
controllers
Actuators
9 Citations (Scopus)

Design of irregular slider surface for satisfying specified load demands

Cheng, C. H. & Chang, M. H., 2005 Nov 1, In : Journal of Mechanical Design, Transactions of the ASME. 127, 6, p. 1184-1190 7 p.

Research output: Contribution to journalArticle

Bearings (structural)
Pressure distribution
Tribology
Polynomials
Air
18 Citations (Scopus)

Design of sliding mode controllers with bounded L2 gain performance: An LMI approach

Juang, J. C. & Lee, C. M., 2005 Jun 15, In : International Journal of Control. 78, 9, p. 647-661 15 p.

Research output: Contribution to journalArticle

Phase control
Linear matrix inequalities
Controllers
Sliding mode control
Control systems
1 Citation (Scopus)

Design of the printing pattern on film for three-dimensional molded interconnect devices

Liu, R. H., Young, W. B. & Ming, H. P., 2018 Oct, In : Advances in Polymer Technology. 37, 6, p. 1722-1731 10 p.

Research output: Contribution to journalArticle

Thermoforming
Printing
Plastic films
Injection molding
Molding
37 Citations (Scopus)

Detailed measurement and assessment of laminar hydrogen jet diffusion flames

Cheng, T. S., Wu, C. Y., Chen, C. P., Li, Y. H., Chao, Y. C., Yuan, T. & Leu, T. S., 2006 Jul 1, In : Combustion and Flame. 146, 1-2, p. 268-282 15 p.

Research output: Contribution to journalArticle

diffusion flames
Reaction kinetics
Hydrogen
flames
Thermal diffusion
17 Citations (Scopus)
boundary element method
Interior Point
Thermoelastic
Boundary element method
Boundary Elements

Determination of mixing length in turbulent mixing layer on basis of vorticity field

Chang, K. C. & Lee, K. H., 2017 Aug, In : International Journal of Heat and Fluid Flow. 66, p. 121-126 6 p.

Research output: Contribution to journalArticle

turbulent mixing
Vorticity
vorticity
preserving
shear
36 Citations (Scopus)

Determination of rated wind speed for maximum annual energy production of variable speed wind turbines

Sedaghat, A., Hassanzadeh, A., Jamali, J., Mostafaeipour, A. & Chen, W. H., 2017 Nov 1, In : Applied Energy. 205, p. 781-789 9 p.

Research output: Contribution to journalArticle

wind turbine
Wind turbines
wind velocity
energy production
speed
9 Citations (Scopus)
Vortex shedding
Flowmeters
Flow rate
Autocorrelation
Fast Fourier transforms
13 Citations (Scopus)

Determination of the operating range of CO2 conversion and syngas production in dry auto-thermal reforming

Lai, M. P., Horng, R. F., Lai, W. H. & Lee, C. H., 2013 May 10, In : International Journal of Hydrogen Energy. 38, 14, p. 5705-5712 8 p.

Research output: Contribution to journalArticle

synthesis gas
Reforming reactions
Conversion efficiency
heat
catalysts
1 Citation (Scopus)

Determining the root cluster and checking the D-stability of an interval system

Chen, C. L. & Yang, S. K., 1994 Jun 1, In : Control, theory and advanced technology. 10, 2, p. 235-248 14 p.

Research output: Contribution to journalArticle

Polynomials
3 Citations (Scopus)

Detonation initiation of JP-8-oxygen mixtures at different initial temperatures

Wen, C. S., Chung, K-M. & Lai, W-H., 2012 Sep 1, In : Shock Waves. 22, 5, p. 477-482 6 p.

Research output: Contribution to journalArticle

Detonation
detonation
Oxygen
oxygen
vapors

Detonation transmission with an abrupt change in area

Hsu, Y. C., Chao, Y. C. & Chung, K. M., 2018 Sep 1, In : Advances in Aircraft and Spacecraft Science. 5, 5, p. 533-550 18 p.

Research output: Contribution to journalArticle

Detonation
Propane
Soot
Pistons
Oxygen
5 Citations (Scopus)

Detumbling of a rigid spacecraft via torque wheel assisted gyroscopic motion

Lin, Y-Y. & Wang, C. T., 2014 Jan 1, In : Acta Astronautica. 93, p. 1-12 12 p.

Research output: Contribution to journalArticle

Spacecraft
Wheels
Torque
Angular momentum
Momentum
3 Citations (Scopus)

Developing a mini-impact system for measuring silicon wafer's elastodynamic response

Jenq, S. T., Leu, T. S., Su, Y. G., Lee, J. S. & Hwang, G. C., 2005 Mar, In : Journal of Mechanics. 21, 1, p. 33-39 7 p.

Research output: Contribution to journalArticle

elastodynamics
Elastodynamics
Silicon wafers
Wafer
Silicon
14 Citations (Scopus)

Developing flow of mixed convection in a vertical rectangular duct with one heating wall

Cheng, C. H. & Weng, C. J., 1993 Dec, In : Numerical Heat Transfer; Part A: Applications. 24, 4, p. 479-493 15 p.

Research output: Contribution to journalArticle

Mixed Convection
Mixed convection
Buoyancy
ducts
buoyancy
5 Citations (Scopus)

Development and diagnosis of a 1-kW self-sustainable proton exchange membrane fuel cell system with a methanol reformer

Chen, C. Y., Hsu, S. W., Yan, W. M., Lai, W-H., Huang, K. P., Yang, C. C., Chen, C. C. & Lai, M. P., 2013 Jul 22, In : Journal of Fuel Cell Science and Technology. 10, 3, 031007.

Research output: Contribution to journalArticle

Proton exchange membrane fuel cells (PEMFC)
Methanol
Fuel cells
Methanol fuels
Uninterruptible power systems
28 Citations (Scopus)

Development and ground tests of a 100-millinewton hydrogen peroxide monopropellant microthruster

Kuan, C. G., Chen, G. B. & Chao, Y. C., 2007 Nov 1, In : Journal of Propulsion and Power. 23, 6, p. 1313-1320 8 p.

Research output: Contribution to journalArticle

monopropellants
Monopropellants
ground tests
hydrogen peroxide
Hydrogen peroxide
Open Access
Cryogenics
cryogenics
coolers
strokes
floating
9 Citations (Scopus)

Development of a beta-type Stirling engine with rhombic-drive mechanism using a modified non-ideal adiabatic model

Yang, H. S. & Cheng, C-H., 2017 Jan 1, In : Applied Energy. 200, p. 62-72 11 p.

Research output: Contribution to journalArticle

Stirling engines
engine
Engines
shaft
Regenerators
17 Citations (Scopus)

Development of a catalytic hydrogen micro-propulsion system

Chen, C. P., Chao, Y. C., Wu, C. Y., Lee, J. C. & Chen, G. B., 2006 Dec 1, In : Combustion science and technology. 178, 10-11, p. 2039-2060 22 p.

Research output: Contribution to journalArticle

propulsion
Propulsion
Hydrogen
Surface reactions
Platinum
26 Citations (Scopus)

Development of a double-microcantilever for surface stress measurement in microsensors

Yang, S. M., Yin, T. I. & Chang, C., 2007 Feb 20, In : Sensors and Actuators, B: Chemical. 121, 2, p. 545-551 7 p.

Research output: Contribution to journalArticle

Microsensors
stress measurement
Stress measurement
Surface measurement
Thermal stress
9 Citations (Scopus)

Development of a helicopter landing gear prototype using resin infusion molding

Young, W-B., 2009 Apr 1, In : Journal of Reinforced Plastics and Composites. 28, 7, p. 833-849 17 p.

Research output: Contribution to journalArticle

Landing gear (aircraft)
Helicopters
Molding
Resins
Temperature
15 Citations (Scopus)

Development of a high-flame-luminosity thermophotovoltaic power system

Li, Y. H., Wu, C. Y., Lien, Y. S. & Chao, Y. C., 2010 Aug 1, In : Chemical Engineering Journal. 162, 1, p. 307-313 7 p.

Research output: Contribution to journalArticle

Carbon Monoxide
luminescence
Luminance
Luminescence
Combustors
32 Citations (Scopus)
Swirling Flow
Swirling flow
Turbulence Model
Turbulence models
Streamlines
44 Citations (Scopus)

Development of a low frequency electrostatic comb-drive energy harvester compatible to SoC design by CMOS process

Sheu, G. J., Yang, S. M. & Lee, T., 2011 May 1, In : Sensors and Actuators, A: Physical. 167, 1, p. 70-76 7 p.

Research output: Contribution to journalArticle

Harvesters
Electrostatics
CMOS
chips
electrostatics
1 Citation (Scopus)

Development of a mathematical model for thermal-compression bonding of the COG packaging process using NCA

Chang, C. H. & Young, W-B., 2011 Apr 1, In : Microelectronics Reliability. 51, 4, p. 860-865 6 p.

Research output: Contribution to journalArticle

packaging
adhesives
mathematical models
Adhesives
Packaging

Development of an automatic testing platform for aviator’s night vision Goggle honeycomb defect inspection

Jian, B. L. & Peng, C. C., 2017 Jun 15, In : Sensors (Switzerland). 17, 6, 1403.

Research output: Contribution to journalArticle

aircraft pilots
Night Vision
Aviators
Eye Protective Devices
goggles
82 Citations (Scopus)

Development of an energy-saving module via combination of solar cells and thermoelectric coolers for green building applications

Cheng, T. C., Cheng, C-H., Huang, Z. Z. & Liao, G. C., 2011 Jan 1, In : Energy. 36, 1, p. 133-140 8 p.

Research output: Contribution to journalArticle

Solar cells
Energy conservation
Waste heat
Cooling water
Cooling
3 Citations (Scopus)

Development of a neuro-fuzzy model for airline passenger forecasting

Chen, C. J., Yang, S. M. & Wang, Z. C., 2012 Sep, In : Journal of Aeronautics, Astronautics and Aviation. 44, 3, p. 169-176 8 p.

Research output: Contribution to journalArticle

passengers
forecasting
Fuzzy rules
gross national product
Gross National Product
pilotless aircraft
Unmanned aerial vehicles (UAV)
sky
hatches
Hatches

Development of an omnidirectional-capable electromagnetic shock wave generator for lipolysis

Chang, M. H. & Lin, S. Y., 2017 Jan 1, In : Journal of Healthcare Engineering. 2017, 9258512.

Research output: Contribution to journalArticle

Open Access
Electromagnetic Radiation
Lipolysis
Shock waves
Electromagnetic waves
Adipose Tissue
36 Citations (Scopus)

Development of a non-uniform-current model for predicting transient thermal behavior of thermoelectric coolers

Cheng, C. H. & Huang, S. Y., 2012 Dec, In : Applied Energy. 100, p. 326-335 10 p.

Research output: Contribution to journalArticle

Electric currents
ceramics
heat transfer
Heat transfer coefficients
prediction
5 Citations (Scopus)

Development of an optical three-dimensional laser tracker using dual modulated laser diodes and a signal detector

Lee, H. W., Chen, C. L. & Liu, C. H., 2011 Mar 1, In : Review of Scientific Instruments. 82, 3, 035101.

Research output: Contribution to journalArticle

signal detectors
Photodiodes
Semiconductor lasers
quadrants
semiconductor lasers
6 Citations (Scopus)

Development of a rule selection mechanism by using neuro-fuzzy methodology for structural vibration suppression

Chen, C. J., Yang, S. M. & Chen, C. Y., 2013 Jan 1, In : Journal of Intelligent and Fuzzy Systems. 25, 4, p. 881-892 12 p.

Research output: Contribution to journalArticle

Vibration Suppression
Neuro-fuzzy Systems
Selection Rules
Neuro-fuzzy
Fuzzy systems
1 Citation (Scopus)

Development of a self-organized neuro-fuzzy model by using genetic algorithm for system identification

Chen, C. J., Yang, S. M. & Lin, S. G., 2014 Dec 1, In : Journal of Aeronautics, Astronautics and Aviation. 46, 4, p. 281-290 10 p.

Research output: Contribution to journalArticle

system identification
fuzzy mathematics
membership functions
genetic algorithms
genetic algorithm
12 Citations (Scopus)

Development of a self-organized neuro-fuzzy model for system identification

Yang, S. M., Chen, C. J., Chang, Y. Y. & Tung, Y. Z., 2007 Aug 1, In : Journal of Vibration and Acoustics, Transactions of the ASME. 129, 4, p. 507-513 7 p.

Research output: Contribution to journalArticle

system identification
Identification (control systems)
membership functions
Fuzzy rules
Membership functions

Development of a Thermoelectric Energy Generator Chip of Small Layout and High Power/Voltage Factors by Foundry Service

Yang, S-M., Wang, J. Y., Chen, M. D. & Tsai, M. H., 2019 Oct 15, In : IEEE Sensors Journal. 19, 20, p. 9149-9155 7 p., 8743440.

Research output: Contribution to journalArticle

foundries
Foundries
Thermocouples
layouts
generators
34 Citations (Scopus)

Development of a thermoelectric energy harvester with thermal isolation cavity by standard CMOS process

Yang, S-M., Lee, T. & Jeng, C. A., 2009 Aug 3, In : Sensors and Actuators, A: Physical. 153, 2, p. 244-250 7 p.

Research output: Contribution to journalArticle

Harvesters
thermocouples
Thermocouples
isolation
CMOS
9 Citations (Scopus)

Development of a tubular flame combustor for thermophotovoltaic power systems

Li, Y. H., Cheng, T. S., Lien, Y. S. & Chao, Y. C., 2011 Feb 3, In : Proceedings of the Combustion Institute. 33, 2, p. 3439-3445 7 p.

Research output: Contribution to journalArticle

combustion chambers
Combustors
flames
Quartz
Oxides

Development of bio-based lubricant from modified desert date oil (balanites aegyptiaca) with copper nanoparticles addition and their tribological analysis

Singh, Y., Sharma, A., Singh, N. K. & Chen, W. H., 2020 Jan 1, In : Fuel. 259, 116259.

Research output: Contribution to journalArticle

Lubricants
Copper
Oils
Mineral Oil
Mineral oils