• Source: Scopus
  • Calculated based on no. of publications stored in Pure and citations from Scopus
1978 …2021

Research activity per year

If you made any changes in Pure these will be visible here soon.
Filter
Conference contribution

Search results

  • 2018

    Performance analysis of the automata in a blossoming flower clock in the 18th century

    Chen, Y. H., Ceccarelli, M. & Yan, H. S., 2018, Advances in Service and Industrial Robotics - Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer Netherlands, p. 1017-1024 8 p. (Mechanisms and Machine Science; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2017

    An introduction to the reconstruction model of Antikythera mechanism

    Lin, J. L. & Yan, H. S., 2017, Mechanism and Machine Science - Proceedings of ASIAN MMS 2016 and CCMMS 2016. Zhang, X., Huang, Y. & Wang, N. (eds.). Springer Verlag, p. 567-580 14 p. (Lecture Notes in Electrical Engineering; vol. 408).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2016

    An introduction to the ancient mechanical wind-instrument automata

    Chen, Y. H., Lin, J. L. & Yan, H. S., 2016, Explorations in the History of Machines and Mechanisms - Proceedings of the 5th IFToMM Symposium on the History of Machines and Mechanisms. Ceccarelli, M. & Lopez-Cajun, C. (eds.). Springer Netherland, p. 77-85 9 p. (History of Mechanism and Machine Science; vol. 32).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2015

    An algorithm for the automatic sketching of generalized kinematic chains

    Chiu, Y. T. & Yan, H. S., 2015 Jan 1, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Citations (Scopus)
  • An introduction to the gravity-driven clocks in the forbidden city

    Chen, Y. H., Hsiao, K. H., Lin, T. Y. & Yan, H. S., 2015 Jan 1, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Novel configurations for hybrid transmissions using a simple planetary gear train

    Ngo, H. T. & Yan, H-S., 2015 Jan 1, 39th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 2012

    Historical development of reconstruction designs of Antikythera mechanism

    Lin, J. L. & Yan, H. S., 2012, History of Mechanical Technology and Mechanical Design 2012. p. 1-6 6 p. (Applied Mechanics and Materials; vol. 163).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Structural synthesis of ancient Chinese Chu State repeating crossbow

    Hsiao, K. H. & Yan, H. S., 2012 Dec 1, Advances in Reconfigurable Mechanisms and Robots I. p. 749-758 10 p. (Advances in Reconfigurable Mechanisms and Robots I).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Citations (Scopus)
  • Structural synthesis of the ancient Chinese zhuge repeating crossbow

    Hsiao, K. H. & Yan, H. S., 2012, Explorations in the History of Machines and Mechanisms - Proceedings of HMM 2012. Koetsier, T. & Ceccarelli, M. (eds.). Springer, p. 213-228 16 p. (History of Mechanism and Machine Science; vol. 15).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Structure synthesis of six-bar mechanisms for aircraft high-lift surfaces

    Wang, A., Yan, H. S. & Kuo, C. H., 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B ed. p. 541-550 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2011

    Reconstruction synthesis of the lost subsystem for the planetary motions of Antikythera mechanism

    Yan, H-S. & Lin, J. L., 2011 Dec 1, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 365-375 11 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Research on scheme design of four-axis machining centers based on topological structure and tool changing motion characteristics

    Liu, J. H., Zhao, B. & Yan, H. S., 2011, Manufacturing Automation Technology Development. Trans Tech Publications Ltd, p. 242-250 9 p. (Key Engineering Materials; vol. 455).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2009

    Conceptual design of fixed center steering wheels

    Huang, F. F., Yan, H-S., Lan, C-C. & Huang, S. T., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 771-780 10 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 2, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Generation and sketching of generalized kinematic chains

    Chiu-Fan, H., Hwang, Y. W. & Yan, H-S., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 1337-1346 10 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 2, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • On the design of a self-balanced quadruped walking machine with ten-bar leg mechanisms

    Yan, H-S. & Huang, C. Y., 2009 Dec 1, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 663-673 11 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • On the number of specialized mechanisms

    Hung, C. C. & Yan, H-S., 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART A ed. Vol. 2. p. 603-609 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • The design of new type multipoint mortise locks

    Huang, H. H., Yan, H-S. & Lin, Y. M., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 805-810 6 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 2, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2008

    Conceptual design of fixed center steering wheels

    Guo, F. F., Yan, H-S., Lan, C-C. & Huang, S. T., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 771-780 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Generation and sketching of generalized kinematic chains

    Hsieh, C. F., Hwang, Y. W. & Yan, H-S., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 1337-1345 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Citations (Scopus)
  • On the number of specialized mechanisms

    Hung, C. C. & Yan, H. S., 2008, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 603-609 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • The design of new type multipoint mortise locks

    Huang, H. H., Yan, H-S. & Lin, Y. M., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 805-810 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 2006

    The development of ancient earthquake instruments

    Yan, H. S. & Hsiao, K. H., 2006 Nov 29, Proceedings of 2006 ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference, DETC2006. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • 2005

    A novel design of a brushless DC motor integrated with an embedded planetary gear train

    Yan, H. S. & Wu, Y. C., 2005 Jan 1, Proc. of the ASME International Des. Eng. Tech. Conferences and Computers and Inf. in Engineering Conf. - DETC2005: ASME/IEEE International Conference on Mechatronic and Embedded Systems Appl.. American Society of Mechanical Engineers, p. 29-36 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Identifying and counting the number of mechanisms from kinematic chains subject to design constraints

    Yan, H. S. & Hung, C. C., 2005 Jan 1, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 29th Mechanisms and Robotics Conference. American Society of Mechanical Engineers, p. 343-350 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 7 A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2004

    Design concepts for linear satellite antennas deploy mechanisms

    Chu, C. C., Wang, L. K. & Yan, H-S., 2004 Oct 14, Proceedings of the 2004 - the Eleventh World Congress in Mechanism and Machine Science. Huang, T. (ed.). p. 260-264 5 p. (Proceeding of the 2004 the Eleventh World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Variable-input-speed mechanism design

    Yao, Y., Yan, H-S. & Cha, J., 2004, Proceedings of the 2004 - the Eleventh World Congress in Mechanism and Machine Science. Huang, T. (ed.). p. 1166-1170 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 1998

    On the contact sequences of roller gear cam mechanisms

    Chen, H. H. & Yan, H. S., 1998, 25th Biennial Mechanisms Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-1998).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • On the coupler curve of rcpcr linkages

    Yan, H. S. & Hsieh, W. H., 1998, 25th Biennial Mechanisms Conference. American Society of Mechanical Engineers (ASME), 5900. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1B-1998).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Stochastic tolerance synthesis for globoidal cam mechanisms with the least manufacturing cost

    Cheng, H. Y. & Yan, H. S., 1998, 25th Biennial Mechanisms Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 1A-1998).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 1996

    A Methodology for the configuration synthesis of machining centers with automatic tool changer

    Yan, H. S. & Chen, F. C., 1996, 24th Biennial Mechanisms Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2B-1996).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 1995

    On the classification of automatic tool changers for machining centers

    Yan, H. S., Yiou, C. W., Chen, F. C. & Chang, P., 1995, 21st Design Automation Conference. American Society of Mechanical Engineers (ASME), p. 931-936 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 1994

    Geometry design of roller gear cams with generalized meshing elements

    Yan, H. S. & Chen, H. H., 1994, 20th Design Automation Conference: Volume 1 - Dynamic Mechanical Systems; Geometric Modeling and Features; Concurrent Engineering. American Society of Mechanical Engineers (ASME), p. 525-532 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. Part F167892-6).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Geometry design of roller gear cams with generalized meshing elements

    Yan, H-S. & Chen, H. H., 1994, 20th Design Automation Conference. ASME, Vol. 69-1. p. 525-532 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 1992

    An analytical method for locating velocity instantaneous centers

    Yan, H. S. & Hsu, M. H., 1992, 22nd Biennial Mechanisms Conference: Flexible Mechanisms, Dynamics, and Analysis. American Society of Mechanical Engineers (ASME), p. 353-359 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. Part F168016-4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 1989

    An expert system for the structural identification and generalization of mechanical devices

    Yan, H. S. & Hwang, Y. W., 1989, Computer-Aided and Computational Design. American Society of Mechanical Engineers (ASME), p. 337-343 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 1981

    SIZE OF SYMMETRICAL SINGLE CUSPS OF FOUR-BAR LINKAGES.

    Yan, H-S., 1981, Proceedings - OSU Applied Mechanisms Conference (Oklahoma State University). Okla State Univ

    Research output: Chapter in Book/Report/Conference proceedingConference contribution