Hsuan-Teh Hu

Professor

  • 1755 Citations
  • 22 h-Index
1988 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2019

Constitutive modelling of composite laminates under uniaxial compression

Hu, H-T. & KE, L. S., 2019 Apr 1, In : Chinese Journal of Aeronautics. 32, 4, p. 938-947 10 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Finite element analysis of T-section RC beams strengthened by wire rope in the negative moment region with an addition of steel rebar at the compression block

Haryanto, Y., Hu, H. T., Lie, H. A., Atmajayanti, A. T., Galuh, D. L. C. & Hidayat, B. A., 2019 Jan 1, In : Jurnal Teknologi. 81, 4, p. 143-154 12 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

太陽光電模組與夾扣件受機械荷重之有限元素分析

Translated title of the contribution: Finite element analysis of solar photovoltaic modules and clamps subjected to mechanical loadsHuang, C. Y., Hu, H. T., Lee, Y. F. & Lin, F. M., 2019 Mar 1, In : Journal of the Chinese Institute of Civil and Hydraulic Engineering. 31, 1, p. 119-127 9 p.

Research output: Contribution to journalArticle

2018

Buckling optimization of laminated truncated conical shells subjected to external hydrostatic compression

Hu, H. T. & Chen, H. C., 2018 Feb 15, In : Composites Part B: Engineering. 135, p. 95-109 15 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Post-failure simulations of a large slope failure using 3DEC: The Hsien-du-shan slope

Wu, J. H., Lin, W. K. & Hu, H. T., 2018 Aug 14, In : Engineering Geology. 242, p. 92-107 16 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2017

Assessing the impacts of a large slope failure using 3DEC: The Chiu-fen-erh-shan residual slope

Wu, J-H., Lin, W. K. & Hu, H-T., 2017 Aug 1, In : Computers and Geotechnics. 88, p. 32-45 14 p.

Research output: Contribution to journalArticle

27 Citations (Scopus)

Residual stress analysis and bow simulation of crystalline silicon solar cells

Chen, C. H., Hu, H. T., Lin, F. M. & Hsieh, H. H., 2017 Jan 1, In : Journal of Zhejiang University: Science A. 18, 1, p. 49-58 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2016

Finite element modeling of superplastic co-doped yttria-stabilized tetragonal-zirconia polycrystals

Hu, H-T., Tseng, S. T. & Hu, A., 2016 Dec 1, In : Journal of Zhejiang University: Science A. 17, 12, p. 989-999 11 p.

Research output: Contribution to journalArticle

Ultimate analysis of PWR prestressed concrete containment under long-term prestressing loss

Hu, H. T. & Lin, J. X., 2016 Jan 1, In : Annals of Nuclear Energy. 87, p. 500-510 11 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2015

Failure analysis of fiber-reinforced composite laminates subjected to biaxial loads

Hu, H. T., Lin, W. P. & Tu, F. T., 2015 Dec 15, In : Composites Part B: Engineering. 83, p. 153-165 13 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Maximization of fundamental frequencies of axially compressed laminated truncated conical shells against fiber orientation

Hu, H. T. & Chen, P. J., 2015 Dec 1, In : Thin-Walled Structures. 97, p. 154-170 17 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Nonlinear finite element analysis of rectangular reinforced concrete slabs strengthened by fiber reinforced plastics

Lesmana, C. & Hu, H. T., 2015 Jan 1, In : Scientia Iranica. 22, 3, p. 615-628 14 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2014

Parametric analyses of square reinforced concrete slabs strengthened by fiber-reinforced plastics

Lesmana, C. & Hu, H-T., 2014 Feb 28, In : Construction and Building Materials. 53, p. 294-304 11 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2013

Finite element verification on constitutive law of AZ31 magnesium alloy at 400 °c

Tseng, S. T. & Hu, H. T., 2013 Nov 1, In : Transactions of Nonferrous Metals Society of China (English Edition). 23, 11, p. 3372-3382 11 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Maximization of fundamental frequency of axially compressed laminated curved panels with cutouts

Hu, H-T. & Peng, H. W., 2013 Apr 1, In : Composites Part B: Engineering. 47, p. 8-25 18 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Numerical analysis of square reinforced concrete plates strengthened by fiber-reinforced plastics with various patterns

Lesmana, C., Hu, H. T., Lin, F. M. & Huang, N. M., 2013 Jul 29, In : Composites Part B: Engineering. 55, p. 247-262 16 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2012

Numerical study on hybrid tubes subjected to static and dynamic loading

Huang, M. Y., Tai, Y. S. & Hu, H. T., 2012 Feb 1, In : Applied Composite Materials. 19, 1, p. 1-19 19 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)
2011

A meshless collocation method for the plane problems of functionally graded material beams and plates using the DRK interpolation

Wu, C-P., Yang, S. W., Wang, Y-M. & Hu, H-T., 2011 Sep 1, In : Mechanics Research Communications. 38, 6, p. 471-476 6 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Dynamic response of a reinforced concrete slab subjected to air blast load

Tai, Y. S., Chu, T. L., Hu, H. T. & Wu, J. Y., 2011 Dec 1, In : Theoretical and Applied Fracture Mechanics. 56, 3, p. 140-147 8 p.

Research output: Contribution to journalArticle

62 Citations (Scopus)

Nonlinear analysis of short concrete-filled double skin tube columns subjected to axial compressive forces

Hu, H-T. & Su, F. C., 2011 Oct 1, In : Marine Structures. 24, 4, p. 319-337 19 p.

Research output: Contribution to journalArticle

37 Citations (Scopus)

Nonlinear finite element analysis of CFT-to-bracing connections subjected to axial compressive forces

Hu, H. T., Chen, C. W. & Huang, M. Y., 2011 May 1, In : Engineering Structures. 33, 5, p. 1479-1490 12 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2010

A meshless collocation method based on the differential reproducing kernel approximation

Yang, S. W., Wang, Y-M., Wu, C-P. & Hu, H-T., 2010 Sep 3, In : CMES - Computer Modeling in Engineering and Sciences. 60, 1, p. 1-39 39 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Axial compression and energy absorption characteristics of high-strength thin-walled cylinders under impact load

Tai, Y. S., Huang, M. Y. & Hu, H-T., 2010 Feb 1, In : Theoretical and Applied Fracture Mechanics. 53, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

46 Citations (Scopus)

Biomechanical analysis of the lumbar spine on facet joint force and intradiscal pressure - A finite element study

Kuo, C. S., Hu, H. T., Lin, R. M., Huang, K. Y., Lin, P. C., Zhong, Z. C. & Hseih, M. L., 2010 Jul 7, In : BMC Musculoskeletal Disorders. 11, 151.

Research output: Contribution to journalArticle

44 Citations (Scopus)

Constitutive modeling of reinforced concrete and prestressed concrete structures strengthened by fiber-reinforced plastics

Hu, H. T., Lin, F. M., Liu, H. T., Huang, Y. F. & Pan, T. C., 2010 Jun 1, In : Composite Structures. 92, 7, p. 1640-1650 11 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Dynamic crushing characteristics of high strength steel cylinders with elliptical geometric discontinuities

Huang, M. Y., Tai, Y. S. & Hu, H-T., 2010 Aug 1, In : Theoretical and Applied Fracture Mechanics. 54, 1, p. 44-53 10 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Finite element analysis of CFT columns subjected to pure bending moment

Hu, H. T., Su, F. C. & Elchalakani, M., 2010 Oct, In : Steel and Composite Structures. 10, 5, p. 415-428 14 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
2009

Maximization of fundamental frequencies of axially compressed laminated plates against fiber orientation

Hu, H. T. & Tsai, W. K., 2009 Apr 1, In : AIAA journal. 47, 4, p. 916-922 7 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)
2007

Buckling optimization of laminated cylindrical panels subjected to axial compressive load

Hu, H-T. & Yang, J. S., 2007 Dec 1, In : Composite Structures. 81, 3, p. 374-385 12 p.

Research output: Contribution to journalArticle

27 Citations (Scopus)

Vibration analysis of rotating laminated cylindrical shells

Hu, H. T. & Wang, K. L., 2007 Aug 1, In : AIAA journal. 45, 8, p. 2051-2061 11 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2006

Buckling analyses of composite laminate skew plates with material nonlinearity

Hu, H. T., Yang, C. H. & Lin, F. M., 2006 Jan 1, In : Composites Part B: Engineering. 37, 1, p. 26-36 11 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)

Ultimate analysis of PWR prestressed concrete containment subjected to internal pressure

Hu, H. T. & Lin, Y. H., 2006 Mar 1, In : International Journal of Pressure Vessels and Piping. 83, 3, p. 161-167 7 p.

Research output: Contribution to journalArticle

35 Citations (Scopus)
2005

Finite element analysis of CFT columns subjected to an axial compressive force and bending moment in combination

Hu, H. T., Huang, C. S. & Chen, Z. L., 2005 Dec 1, In : Journal of Constructional Steel Research. 61, 12, p. 1692-1712 21 p.

Research output: Contribution to journalArticle

78 Citations (Scopus)
2004

Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics

Hu, H. T., Lin, F. M. & Jan, Y. Y., 2004 Jan 1, In : Composite Structures. 63, 3-4, p. 271-281 11 p.

Research output: Contribution to journalArticle

82 Citations (Scopus)
2003

Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect

Hu, H. T., Huang, C. S., Wu, M. H. & Wu, Y. M., 2003 Oct 1, In : Journal of Structural Engineering. 129, 10, p. 1322-1329 8 p.

Research output: Contribution to journalArticle

313 Citations (Scopus)
2002

Axial load behavior of stiffened concrete-filled steel columns

Huang, C. S., Yeh, Y. K., Liu, G. Y., Hu, H. T., Tsai, K. C., Weng, Y. T., Wang, S. H. & Wu, M. H., 2002 Sep, In : Journal of Structural Engineering. 128, 9, p. 1222-1230 9 p.

Research output: Contribution to journalArticle

202 Citations (Scopus)

Nonlinear analysis of fiber-reinforced composite laminates subjected to uniaxial tensile load

Lin, W. P. & Hu, H. T., 2002 Aug 27, In : Journal of Composite Materials. 36, 12, p. 1429-1450 22 p.

Research output: Contribution to journalArticle

46 Citations (Scopus)

Parametric study on the failure of fiber-reinforced composite laminates under biaxial tensile load

Lin, W. P. & Hu, H-T., 2002 Aug 27, In : Journal of Composite Materials. 36, 12, p. 1481-1503 23 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)

Strengthening of BWR Mark III reinforced concrete containment with fibre composite laminate material

Hu, H. T. & Chou, T. F., 2002 May 3, In : International Journal of Pressure Vessels and Piping. 79, 4, p. 297-308 12 p.

Research output: Contribution to journalArticle

2001

Maximization of the fundamental frequencies of laminated truncated conical shells with respect to fiber orientations

Hu, H. T. & Ou, S. C., 2001 May 1, In : Composite Structures. 52, 3-4, p. 265-275 11 p.

Research output: Contribution to journalArticle

26 Citations (Scopus)

Wave motion over a breakwater system of a horizontal plate and a vertical porous wall

Hu, H., Wang, K. H. & Williams, A. N., 2001 Oct 30, In : Ocean Engineering. 29, 4, p. 373-386 14 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)
2000

Buckling analysis of skew laminate plates subjected to uniaxial inplane loads

Hu, H. T. & Tzeng, W. L., 2000 Sep, In : Thin-Walled Structures. 38, 1, p. 53-77 25 p.

Research output: Contribution to journalArticle

25 Citations (Scopus)

Ultimate analysis of BWR Mark III reinforced concrete containment subjected to internal pressure

Hu, H. T. & Liang, J. I., 2000 Jan, In : Nuclear Engineering and Design. 195, 1, p. 1-11 11 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)
1999

Buckling optimization of unsymmetrically laminated plates under transverse loads

Hu, H. T., 1999 Jan 1, In : Structural Engineering and Mechanics. 7, 1, p. 19-33 15 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Maximization of the fundamental frequencies of laminated cylindrical shells with respect to fiber orientations

Hu, H. T. & Tsai, J. Y., 1999 Aug 26, In : Journal of Sound and Vibration. 225, 4, p. 723-740 18 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)
1997

Maximization of the fundamental frequencies of laminated curved panels against fiber orientation

Hu, H. T. & Juangt, C. D., 1997 Jan 1, In : Journal of Aircraft. 34, 6, p. 792-801 10 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
1996
10 Citations (Scopus)
1995

Buckling analyses of fiber-composite laminate plates with material nonlinearity

Hu, H. T., 1995 Apr, In : Finite Elements in Analysis and Design. 19, 3, p. 169-179 11 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Buckling optimization of symmetrically laminated plates with various geometries and end conditions

Hu, H. T. & Lin, B. H., 1995, In : Composites Science and Technology. 55, 3, p. 277-285 9 p.

Research output: Contribution to journalArticle

35 Citations (Scopus)

Effect of material nonlinearity on buckling and postbuckling of fiber composite laminated plates and cylindrical shells

Wang, S. S., Srinivasan, S., Hu, H-T. & HajAli, R., 1995 Jan 1, In : Composite Structures. 33, 1, p. 7-15 9 p.

Research output: Contribution to journalArticle

27 Citations (Scopus)