Hwa-Teng Lee

Professor

  • 1762 Citations
  • 21 h-Index
1988 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1988 2019

  • 1762 Citations
  • 21 h-Index
  • 82 Article
  • 10 Conference contribution
  • 2 Letter
  • 1 Conference article
Filter
Article
2019

The influence of mg-based inclusions on the grain boundary mobility of austenite in ss400 steel

Lai, C. T., Lai, H. H., Su, Y. H. F., Huang, F. Y., Lin, C. K., Kuo, J-C. & Lee, H-T., 2019 Mar 1, In : Metals. 9, 3, 370.

Research output: Contribution to journalArticle

Open Access
Steel
Austenite
Grain boundaries
Grain growth
Temperature
2018

Alloy82銲道微結構與沿晶腐蝕阻抗之研究

Translated title of the contribution: Microstructure and Intergranular Corrosion Resistance Evaluation of Alloy 82 WeldmentsLee, H-T. & Liu, T. C., 2018 Apr 1, In : Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 39, 2, p. 131-143 13 p.

Research output: Contribution to journalArticle

Corrosion resistance
Welds
Microstructure
Grain boundaries
Electric arc welding
2017

Influence on Powders and Process Parameters on Bonding Shear Strength in Laser Cladding

Xu, M., Li, J., Lee, H-T., Sun, J., Li, F. & Zhao, Y., 2017 May 5, In : Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. 53, 9, p. 209-216 8 p.

Research output: Contribution to journalArticle

Laser Cladding
Laser cladding
Shear Strength
Process Parameters
Powder
1 Citation (Scopus)

The improvement of corrosion resistance of sensitized alloy 82 welds using laser surface melting

Lee, H-T. & Liu, T. C., 2017 Jan 1, In : Materials Transactions. 58, 9, p. 1329-1336 8 p.

Research output: Contribution to journalArticle

corrosion resistance
Corrosion resistance
Welds
Melting
melting
2016
3 Citations (Scopus)

Effect of Solder-Joint Geometry on the Low-Cycle Fatigue Behavior of Sn-xAg-0.7Cu

Lee, H-T. & Huang, K. C., 2016 Dec 1, In : Journal of Electronic Materials. 45, 12, p. 6102-6112 11 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Fatigue of materials
cycles
Geometry
2015
1 Citation (Scopus)

Application and characteristics of low-carbon martensitic stainless steels on turbine blades

Lee, H-T., Liu, F. M. & Hou, W. H., 2015 Jan 1, In : Materials Transactions. 56, 4, p. 563-569 7 p.

Research output: Contribution to journalArticle

martensitic stainless steels
Martensitic stainless steel
turbine blades
tempering
Tempering

Effects of Cooling Rate on the Microstructure and Morphology of Sn-3.0Ag-0.5Cu Solder

Lee, H. T. & Huang, K. C., 2015 Nov 30, (Accepted/In press) In : Journal of Electronic Materials. p. 1-9 9 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Cooling
cooling
microstructure
9 Citations (Scopus)

The effects of Mn and Nb on the microstructure and mechanical properties of Alloy 152 welds

Jeng, S. L., Lee, H-T., Kuo, T. Y., Tsai, K. C., Chung, C. L. & Huang, J. Y., 2015 Dec 15, In : Materials and Design. 87, p. 920-931 12 p.

Research output: Contribution to journalArticle

Welds
Mechanical properties
Microstructure
Oxides
Metals
2012
23 Citations (Scopus)

Development of fine-grained structure and the mechanical properties of nickel-based Superalloy 718

Lee, H-T. & Hou, W. H., 2012 Oct 15, In : Materials Science and Engineering A. 555, p. 13-20 8 p.

Research output: Contribution to journalArticle

heat resistant alloys
Nickel
Superalloys
Niobium
forging
9 Citations (Scopus)

Fine grains forming process, mechanism of fine grain formation and properties of superalloy 718

Lee, H-T. & Hou, W. H., 2012 Apr 5, In : Materials Transactions. 53, 4, p. 716-723 8 p.

Research output: Contribution to journalArticle

grain formation
Crystal microstructure
heat resistant alloys
Superalloys
Inconel (trademark)
1 Citation (Scopus)

Influence of precipitated phase formation on recrystallization behavior of superalloy 718

Lee, H-T. & Hou, W. H., 2012 Oct 5, In : Materials Transactions. 53, 7, p. 1334-1342 9 p.

Research output: Contribution to journalArticle

heat resistant alloys
Superalloys
forging
Dynamic recrystallization
Grain refinement

Rejuvenation of weld decayed alloy 82 by laser surface treatment

Chen, K. Y., Lee, H-T., Jeng, S. L., Hsu, C. C. & Tseng, B. C., 2012 Dec 1, In : Journal of Chinese Corrosion Engineering. 26, 2, p. 89-98 10 p.

Research output: Contribution to journalArticle

Surface treatment
Welds
Heat affected zone
Corrosion resistance
Lasers
1 Citation (Scopus)

Study of δ phase on static recrystallization behavior of inconel 718 alloy

Lee, H-T. & Hou, W. H., 2012 Sep 1, In : Journal of Nanoscience and Nanotechnology. 12, 9, p. 6987-6995 9 p.

Research output: Contribution to journalArticle

Inconel (trademark)
hot working
grain size
Temperature
Dynamic recrystallization
2011
7 Citations (Scopus)

Effect of La addition on adhesive strength and fracture behavior of Sn-3.5Ag solder joints

Lee, H-T., Chen, Y. F., Schwedt, A. & Mayer, J., 2011 Apr 25, In : Materials Science and Engineering A. 528, 10-11, p. 3630-3638 9 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
adhesives
Adhesives
Crack initiation
5 Citations (Scopus)

Effect of material physical properties on residual stress measurement by EDM hole-drilling method

Lee, H-T., Tai, T. Y., Liu, C., Hsu, F. C. & Hsu, J. M., 2011 Apr 5, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 133, 2, 021014.

Research output: Contribution to journalArticle

Electric discharge machining
stress measurement
Stress measurement
drilling
machining
28 Citations (Scopus)

Evolution of Ag3Sn intermetallic compounds during solidification of eutectic Sn-3.5Ag solder

Lee, H-T. & Chen, Y. F., 2011 Feb 3, In : Journal of Alloys and Compounds. 509, 5, p. 2510-2517 8 p.

Research output: Contribution to journalArticle

Soldering alloys
Eutectics
Intermetallics
Solidification
Cooling
5 Citations (Scopus)

Microstructures and magnetostriction of two-phase Fe 66 -Pd 30 -Ni 4 high-temperature ferromagnetic shape memory alloys

Lin, Y. C., Lin, C. F., Yang, J. B. & Lee, H-T., 2011 Apr 1, In : Journal of Applied Physics. 109, 7, 07A912.

Research output: Contribution to journalArticle

shape memory alloys
magnetostriction
microstructure
x ray diffraction
homogenizing
3 Citations (Scopus)
gas tungsten arc welding
Tungsten
Electric arc welding
Heat affected zone
intergranular corrosion
1 Citation (Scopus)

Predicting effect of temperature field on sensitization of alloy 690 weldments

Lee, H-T. & Chen, C. T., 2011 Nov 11, In : Materials Transactions. 52, 9, p. 1824-1831 8 p.

Research output: Contribution to journalArticle

welding
Temperature distribution
temperature distribution
Welding
Laser beam welding
2010
6 Citations (Scopus)
gas tungsten arc welding
Tungsten
Laser beam welding
Electric arc welding
welding

Development of extra fine grain structure of superalloy 718

Wun-Sinhou, Chang, S. F., Tsai, C. C., Lee, H-T., Yu-Leiliu, Kuo, W. C. & Wang, S. C., 2010, In : SEAISI Quarterly (South East Asia Iron and Steel Institute). 39, 4, p. 31-36 6 p.

Research output: Contribution to journalArticle

Crystal microstructure
heat resistant alloys
Superalloys
Precipitates
cold working
5 Citations (Scopus)

Effects of beam offset on mechanical properties and corrosion resistance of Alloy 690-SUS 304L EBW joints for nuclear power plant

Lin, Y. D., Lee, H-T., Kuo, T. Y., Jeng, S. L. & Wu, J. L., 2010 Jan 1, In : Journal of Nuclear Materials. 401, 1-3, p. 78-85 8 p.

Research output: Contribution to journalArticle

electron beam welding
Electron beam welding
nuclear power plants
corrosion resistance
butt joints
8 Citations (Scopus)

Grain size refinement and magnetostriction of ferromagnetic shape memory Fe-Pd-Rh alloys

Lin, Y. C. & Lee, H-T., 2010 Jan 1, In : Journal of Magnetism and Magnetic Materials. 322, 2, p. 197-207 11 p.

Research output: Contribution to journalArticle

Magnetostriction
magnetostriction
ductility
Shape memory effect
Ductility
shape memory alloys
magnetostriction
grain size
longitude
martensite
17 Citations (Scopus)
Tungsten
Laser beam welding
Electric arc welding
Welding
Numerical Investigation
2009
24 Citations (Scopus)
Tungsten
Laser beam welding
Electric arc welding
Corrosion resistance
Gases
1 Citation (Scopus)

Effects of thermal storage and Cu addition on adhesive strength and microstructure of Sn-3.0 mass% Ag-1.5 mass% Sb-xCu solder joints

Lee, H-T. & Huang, W. Y., 2009 Apr 1, In : Materials Transactions. 50, 4, p. 899-908 10 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
adhesives
Adhesives
Strain rate
7 Citations (Scopus)

Influence of lanthanum additions on the microstructure and microhardness of sn-3.5Ag solder

Lee, H-T. & Chen, Y. F., 2009 Oct 1, In : Journal of Electronic Materials. 38, 10, p. 2148-2157 10 p.

Research output: Contribution to journalArticle

Lanthanum
solders
lanthanum
Soldering alloys
Microhardness
3 Citations (Scopus)

Microstructural evolution of sn-ag-sb solder with indium additions

Lee, H-T., Lee, C. Y., Lee, F. F., Chen, Y. F. & Lee, Y. H., 2009 Oct 1, In : Journal of Electronic Materials. 38, 10, p. 2112-2121 10 p.

Research output: Contribution to journalArticle

Indium
Microstructural evolution
solders
Soldering alloys
indium
9 Citations (Scopus)

Optimizing the EDM hole-drilling strain gage method for the measurement of residual stress

Lee, H-T. & Liu, C-P., 2009 Aug 1, In : Journal of Materials Processing Technology. 209, 15-16, p. 5626-5635 10 p.

Research output: Contribution to journalArticle

Electric discharge machining
Strain gages
Residual stresses
Drilling
Electrodes
1 Citation (Scopus)

Pop-in crack propagation monitoring for AA2024-T3 ductile alloy

Lin, H. C., Kuo, T. Y. & Lee, H-T., 2009 Feb 1, In : Materials Transactions. 50, 2, p. 313-320 8 p.

Research output: Contribution to journalArticle

crack propagation
Crack propagation
Monitoring
Temperature
temperature
2008
1 Citation (Scopus)

An enhanced calibration scheme for the EDM hole-drilling strain gage method for the measurement of residual stress in ferrous materials

Lee, H-T., Liu, C-P., Hsu, F. C. & Hsu, J. M., 2008 Aug 1, In : Materials Transactions. 49, 8, p. 1905-1910 6 p.

Research output: Contribution to journalArticle

strain gages
Strain gages
drilling
residual stress
Residual stresses
5 Citations (Scopus)
stress measurement
Stress measurement
drilling
machining
residual stress
14 Citations (Scopus)

Effects of Nb on the microstructure and elevated-temperature mechanical properties of alloy 690-SUS 304L dissimilar welds

Jeng, S. L., Lee, H-T., Huang, J. Y. & Kuo, R. C., 2008 Jun 1, In : Materials Transactions. 49, 6, p. 1270-1277 8 p.

Research output: Contribution to journalArticle

tensile strength
Welds
mechanical properties
Mechanical properties
microstructure
2 Citations (Scopus)

Influence of Cu addition on intermetallic compound formation and microstructure of Sn-3Ag-1.5Sb-xCu solder joints

Lee, H-T., Huang, W. Y. & Chen, Y. F., 2008 Nov 1, In : Science and Technology of Welding and Joining. 13, 8, p. 781-790 10 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Intermetallics
intermetallics
microstructure
1 Citation (Scopus)

Microstructure and magnetic property of ferromagnetic Fe-Pd-Rh alloys

Lin, Y. C. & Lee, H-T., 2008 Jan 1, In : Journal of the Korean Physical Society. 52, 5, p. 1410-1414 5 p.

Research output: Contribution to journalArticle

remanence
magnetic properties
microstructure
saturation
transmission electron microscopy
26 Citations (Scopus)

The shear strength and fracture behavior of Sn-Ag-xSb solder joints with Au/Ni-P/Cu UBM

Lee, H-T., Hu, S. Y., Hong, T. F. & Chen, Y. F., 2008 Jun 1, In : Journal of Electronic Materials. 37, 6, p. 867-873 7 p.

Research output: Contribution to journalArticle

shear strength
solders
Metallizing
Shear strength
Soldering alloys
2007
6 Citations (Scopus)

Drilling microholes in hot tool steel by using micro-electro discharge machining

Tai, T. Y., Masusawa, T. & Lee, H-T., 2007 Feb 1, In : Materials Transactions. 48, 2, p. 205-210 6 p.

Research output: Contribution to journalArticle

Electric discharge machining
Tool steel
drilling
machining
Drilling
10 Citations (Scopus)

Magnetic structure of an Fe-Pd-Rh alloy

Lin, Y. C., Lee, H-T., Jen, S. U. & Chen, Y. T., 2007 May 21, In : Journal of Applied Physics. 101, 9, 09N514.

Research output: Contribution to journalArticle

x ray diffraction
transmission electron microscopy
lattice parameters
martensitic transformation
13 Citations (Scopus)

Microstructual study of the dissimilar joints of alloy 690 and SUS 304L stainless steel

Jeng, S. L., Lee, H-T., Weirich, T. E. & Rebach, W. P., 2007 Mar 1, In : Materials Transactions. 48, 3, p. 481-489 9 p.

Research output: Contribution to journalArticle

Stainless Steel
stainless steels
Fusion reactions
Stainless steel
fusion
4 Citations (Scopus)

Precipitated phases and corrosion behavior in the dissimilar alloy 690-SUS 304L joints formed by EBW and GTAW

Lee, H-T., Lin, Y. D., Kuo, T. Y. & Jeng, S. L., 2007 Jun 1, In : Materials Transactions. 48, 6, p. 1538-1547 10 p.

Research output: Contribution to journalArticle

electron beam welding
gas tungsten arc welding
Electron beam welding
Tungsten
Electric arc welding
70 Citations (Scopus)

Shear strength and interfacial microstructure of Sn-Ag-xNi/Cu single shear lap solder joints

Lee, Y. H. & Lee, H-T., 2007 Jan 25, In : Materials Science and Engineering A. 444, 1-2, p. 75-83 9 p.

Research output: Contribution to journalArticle

shear strength
solders
Shear strength
Soldering alloys
shear
2006
60 Citations (Scopus)

Adhesive strength and tensile fracture of Ni particle enhanced Sn-Ag composite solder joints

Lee, H-T. & Lee, Y. H., 2006 Mar 15, In : Materials Science and Engineering A. 419, 1-2, p. 172-180 9 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
adhesives
Adhesives
composite materials
12 Citations (Scopus)

Application of EDM hole-drilling method to the measurement of residual stress in tool and carbon steels

Lee, H-T., Mayer, J., Hsu, F. C., Rehbach, W. P., Weirich, T., Dimyati, A. & Tai, T. Y., 2006 Jul 1, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 128, 3, p. 468-475 8 p.

Research output: Contribution to journalArticle

Tool steel
carbon steels
drilling
machining
residual stress
11 Citations (Scopus)

Microstructure and corrosion behaviour of alloy 690-SUS 304L butt joints formed by electron beam welding

Lee, H-T. & Lin, Y. D., 2006 Nov 1, In : Science and Technology of Welding and Joining. 11, 6, p. 650-656 7 p.

Research output: Contribution to journalArticle

electron beam welding
butt joints
Electron beam welding
Caustics
corrosion
2005
11 Citations (Scopus)

Effects of in situ nickel particle addition on the microstructure and microhardness of Sn-Ag solder

Lee, H-T. & Lee, Y. H., 2005 Jun 1, In : Science and Technology of Welding and Joining. 10, 3, p. 353-360 8 p.

Research output: Contribution to journalArticle

solders
Nickel
Soldering alloys
Microhardness
microhardness
36 Citations (Scopus)

Effects of Nb on the microstructure and corrosive property in the Alloy 690-SUS 304L weldment

Jeng, S. L., Lee, H-T., Rehbach, W. P., Kuo, T. Y., Weirich, T. E. & Mayer, J. P., 2005 Apr 25, In : Materials Science and Engineering A. 397, 1-2, p. 229-238 10 p.

Research output: Contribution to journalArticle

Niobium
Corrosive effects
niobium
microstructure
Microstructure
75 Citations (Scopus)

Reliability of Sn-Ag-Sb lead-free solder joints

Lee, H-T., Lin, H. S., Lee, C. S. & Chen, P. W., 2005 Oct 25, In : Materials Science and Engineering A. 407, 1-2, p. 36-44 9 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Intermetallics
intermetallics
balls
4 Citations (Scopus)
tensile tests
cracks
Cracks
Temperature
Cooling
2004
67 Citations (Scopus)

Dissimilar welding of nickel-based Alloy 690 to SUS 304L with Ti addition

Lee, H-T., Jeng, S. L., Yen, C. H. & Kuo, T. Y., 2004 Oct 1, In : Journal of Nuclear Materials. 335, 1, p. 59-69 11 p.

Research output: Contribution to journalArticle

Nickel
welding
Welding
Weldability
nickel