Supervised Work
- 1 - 25 out of 31 results
Search results
-
Effect of Laser Power on Mechanical Properties and Microstructure of 316L Stainless Steel Deposited by Direct Energy Deposition(DED)
泰育邱 (Author), Kuo, J.-C. (Supervisor), 2019Student thesis: Doctoral Thesis
-
Effect of Manganese Content and Cooling Rate on Transverse Crack in Low Carbon Steel
宗憲蔡 (Author), Kuo, J.-C. (Supervisor), 2019Student thesis: Doctoral Thesis
-
Effects of Bismuth Addition on Microstructure and Mechanical Properties of SAC Solder Ball
琇涵湖 (Author), Kuo, J.-C. (Supervisor), 2020Student thesis: Doctoral Thesis
-
Influence of Twin-Matrix Lamellae on Rolling Texture Simulation in Low Stacking Fault Energy F C C Metals Using Taylor-Based Models
昕瑩林 (Author), Kuo, J.-C. (Supervisor), 2019Student thesis: Doctoral Thesis
-
Investigation of Microstructure and Mechanical Properties of Extruded AA6061 Rod and Plate
鵬威黃 (Author), Kuo, J.-C. (Supervisor), 2020Student thesis: Doctoral Thesis
-
Investigation of Oxidation Behavior in High-Alloy Austenitic Stainless Steel Containing Nb
聖堯黃 (Author), Kuo, J.-C. (Supervisor), 2020Student thesis: Doctoral Thesis
-
Microstructure Development and Precipitation Behavior of Laves Phase during Thermomechanical Process in High Chromium Ferritic Stainless Steel
証文, 蕭 (Author), Kuo, J.-C. (Supervisor), 2017 Jul 7Student thesis: Doctoral Thesis
-
On Stress-Strain Method of Polycrystalline Copper from Spherical Indentation Using Finite Element Method
晏文劉 (Author), Kuo, J.-C. (Supervisor), 2020Student thesis: Doctoral Thesis
-
Simulation of Flow Curve and Rolling Texture of Polycrystalline Copper Using Crystal Plasticity Finite Element Method (CP-FEM)
仲紹孫 (Author), Kuo, J.-C. (Supervisor), 2019Student thesis: Doctoral Thesis
-
SS400低碳鋼中含鎂介在物誘導針狀肥粒鐵成核機制之研究
紀綱林 (Author), Kuo, J.-C. (Supervisor), 2019Student thesis: Doctoral Thesis
-
Study of Preferred Orientation in FePd Alloy Prepared by Electrodeposition and Thermo-mechanical Processes
鴻濱, 林 (Author), Kuo, J.-C. (Supervisor), 2014 Aug 11Student thesis: Doctoral Thesis
-
tmigd1基因單核?酸多型性之乾式生物檢測試紙系統
志韋, 林 (Author), Kuo, J.-C. (Supervisor), 2016 Jul 4Student thesis: Master's Thesis
-
以EBSD分析HTST與HAST可靠度測試後銀-鈀/鋁及銀-金-鈀/鋁接合處之介金屬層
柏勲, 林 (Author), Kuo, J.-C. (Supervisor), 2015 Feb 16Student thesis: Master's Thesis
-
以ECCI技術分析變形與退火過程中Crofer 22 H不鏽鋼中差排組織之演化
庭宜, 吳 (Author), Kuo, J.-C. (Supervisor), 2017 Aug 17Student thesis: Master's Thesis
-
含鈰SS400鋼中介在物控制及顯微組織調整之研究
騰南, 蘇 (Author), Kuo, J.-C. (Supervisor), 2018 Aug 18Student thesis: Master's Thesis
-
含鎂添加之SS400低碳鋼中介在物之高溫臨場研究
暄澔, 賴 (Author), Kuo, J.-C. (Supervisor), 2018 Aug 18Student thesis: Master's Thesis
-
探討加速電壓和試片厚度對穿透式背向散射電子繞射技術之空間解析度的影響
智文, 施 (Author), Kuo, J.-C. (Supervisor), 2016 Aug 11Student thesis: Master's Thesis
-
探討原子序對穿透式背向散射電子繞射技術之空間解析度的影響
珈瑋, 郭 (Author), Kuo, J.-C. (Supervisor), 2017 Jul 25Student thesis: Master's Thesis
-
探討摻鐵鈮酸鋰的缺陷結構與物理性質
宥昀, 李 (Author), Kuo, J.-C. (Supervisor), 2017 Aug 28Student thesis: Doctoral Thesis
-
探討沃斯田鐵晶粒尺寸及冷卻速率對SM570鋼的針狀肥粒鐵形成之影響
儀珊, 徐 (Author), Kuo, J.-C. (Supervisor), 2014 Aug 13Student thesis: Master's Thesis
-
探討泰勒模型模擬和實驗間冷軋純銅優選方位強度差異之研究
世杰, 蕭 (Author), Kuo, J.-C. (Supervisor), 2018 Aug 18Student thesis: Master's Thesis
-
探討熱機過程中硫化錳的形貌分析與變形行為
琲雅, 黃 (Author), Kuo, J.-C. (Supervisor), 2016 Aug 11Student thesis: Master's Thesis
-
探討疊差能對冷軋黃銅、鎳及銅織構與微結構之影響
皇均, 陳 (Author), Kuo, J.-C. (Supervisor), 2015 Aug 18Student thesis: Master's Thesis
-
探討直接能量雷射沉積之製程參數對單層沉積之316L不鏽鋼中結構與性質的影響
彥廷, 陳 (Author), Kuo, J.-C. (Supervisor), 2018 Aug 16Student thesis: Master's Thesis
-
探討蒙地卡羅法模擬背向式與穿透式背向散射電子繞射顯微鏡的空間解析度
彥慧, 李 (Author), Kuo, J.-C. (Supervisor), 2015 Aug 17Student thesis: Master's Thesis