• 2268 Citations
  • 21 h-Index
1983 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

20 Citations (Scopus)

Activation energy of AgInSbTe film through isothermal sheet resistance measurements

Chou, C. C., Hung, F. Y. & Lui, T. S., 2007 Feb 1, In : Materials Transactions. 48, 2, p. 258-264 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Adherence of porcelain veneered on titanium with an intermediate plasma-sprayed zirconia layer

Lo, T. N., Chang, E. & Lui, T. S., 2004 Jul 1, In : Materials Transactions. 45, 3, p. 947-952 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
3 Citations (Scopus)

A modification on the portevin-le chatelier effect of substitutional FCC alloys

Chen, M. C., Chen, L. H. & Lui, T-S., 1989 Jan 1, In : Scripta Metallurgica. 23, 5, p. 655-658 4 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
12 Citations (Scopus)

Analysis on the critical strain associated with the onset of portevin-Lecatelier effect of substitutional F.C.C. alloys

Chen, M. C., Chen, L. H. & Lui, T. S., 1992 Sep, In : Acta Metallurgica Et Materialia. 40, 9, p. 2433-2438 6 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

A new infrared heat treatment on hot forging 7075 aluminum alloy: Microstructure and mechanical properties

Chang, Y. L., Hung, F. Y. & Lui, T. S., 2020 Mar 1, In : Materials. 13, 5, 1177.

Research output: Contribution to journalArticle

Open Access

An investigation into the crystallization and electric flame-off characteristics of 20 μm copper wires

Hung, F. Y., Lui, T. S., Chen, L. H. & Hsueh, H. W., 2011 Jan 1, In : Microelectronics Reliability. 51, 1, p. 21-24 4 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Annealing effect and tensile interface fracture mechanism of pure silver bonding wires

Hsueh, H. W., Hung, F. Y., Lui, T. S. & Chen, L. H., 2012 May 15, Extraction and Processing Division - 2012 EPD Congress - Held During the TMS 2012 Annual Meeting and Exhibition. p. 145-152 8 p. (TMS Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A study at room temperature and 55°C on the charge-discharge characteristics of Si(100-x)Alx thin film anode for Li-ion batteries

Shih, Y. T., Wu, C. H., Hung, F-Y., Lui, T-S. & Chen, L. H., 2013 Jan 25, In : Surface and Coatings Technology. 215, p. 79-84 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

A study of green Sn-xZn photovoltaic ribbons for solar cell application

Chen, K. J., Hung, F. Y., Lui, T. S., Chen, L. H. & Chen, Y. W., 2015 Jan 1, In : Solar Energy Materials and Solar Cells. 143, p. 561-566 6 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

A study of microstructural stability of friction stir welded joints of Al-Mg alloys during subsequent thermal exposure

Lin, C. Y., Lui, T. S. & Chen, L. H., 2016 Jan 1, Light Metals 2012. Springer International Publishing, p. 527-532 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

A study of microstructural stability of friction stir welded joints of Al-Mg alloys during subsequent thermal exposure

Lin, C. Y., Lui, T-S. & Chen, L. H., 2012 May 16, Light Metals 2012 - Proceedings of the Technical Sessions Presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting and Exhibition. p. 527-532 6 p. (TMS Light Metals).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Study of Microstructural Stability of Friction Stir Welded Joints of Al-Mg Alloys during Subsequent Thermal Exposure

Lin, C. Y., Lui, T. S. & Chen, L. H., 2012 May 24, Light Metals 2012. wiley, p. 527-532 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

A study of nano-sized surface coating on LiMn 2 O 4 materials

Hung, F. Y., Lui, T. S. & Liao, H. C., 2007 Jul 15, In : Applied Surface Science. 253, 18, p. 7443-7448 6 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

A study of tensile properties of ferritic compacted graphite cast irons at intermediate temperatures

Chao, C. G., Lui, T-S. & Hon, M. H., 1989 Jul 1, In : Journal of Materials Science. 24, 7, p. 2610-2614 5 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

A study of the texture hardening of pure aluminum and Al-Al3Ni eutectic alloy with [111] fiber texture

Uan, J. Y., Chen, L. H. & Lui, T. S., 1997 Jun 15, In : Scripta Materialia. 36, 12, p. 1391-1395 5 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

A study of the thin film on the surface of Sn-3.5Ag/Sn-3.5Ag-2.0Cu lead-free alloy

Hung, F. Y., Lin, H. M., Chen, P. S., Lui, T. S. & Chen, L. H., 2006 May 18, In : Journal of Alloys and Compounds. 415, 1-2, p. 85-92 8 p.

Research output: Contribution to journalArticle

27 Citations (Scopus)

A study on electro-discharge machined surfaces of ferritic SG cast irons

Tsai, D. C., Song, J. M., Lui, T. S. & Chen, L. H., 2002 Jun, In : Materials Transactions. 43, 6, p. 1360-1366 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

A study on electromigration-inducing intergranular fracture of fine silver alloy wires

Hsueh, H. W., Hung, F. Y. & Lui, T. S., 2017 Jan 16, In : Applied Physics Letters. 110, 3, 031902.

Research output: Contribution to journalArticle

5 Citations (Scopus)

A study on erosion of upper bainitic ADI and PDI

Hung, F-Y., Chen, L. H. & Lui, T-S., 2006 May 31, In : Wear. 260, 9-10, p. 1003-1012 10 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
13 Citations (Scopus)

A study on particle erosion behavior of ductile irons

Chang, L. C., Hsui, I. C., Chen, L. H. & Lui, T. S., 2005 Apr 1, In : Scripta Materialia. 52, 7, p. 609-613 5 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

A study on SiO2 particle erosion of flake graphite and spheroidal graphite cast irons

Dai, W. S., Chen, L. H. & Lui, T. S., 2000 Apr 1, In : Wear. 239, 1, p. 143-152 10 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)

A study on the particle erosion of upper bainitic austempered ductile iron

Hung, F. Y., Chen, L. H. & Lui, T. S., 2002 Jun 1, In : Wear. 252, 11-12, p. 985-991 7 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

A study on the subgrain superplasticity of extruded Al-Al3Ni eutectic alloy

Uan, J. Y., Chen, L. H. & Lui, T. S., 1997 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 28, 2, p. 401-409 9 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

A study on the tensile deformation of superplastic-like Al-Al3Ni eutectic alloy with [111] fiber texture

Uan, J. Y., Lui, T. S. & Chen, L. H., 2000 Jan 1, In : Key Engineering Materials. 177-180, p. 631-636 6 p.

Research output: Contribution to journalArticle

A study on the tensile fracture mechanism of 15 μm copper wire after EFO process

Huang, I. T., Hung, F. Y., Lui, T. S., Chen, L. H. & Hsueh, H. W., 2011 Jan 1, In : Microelectronics Reliability. 51, 1, p. 25-29 5 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Bioactivity and corrosion properties of novel coatings containing strontium by micro-arc oxidation

Kung, K. C., Lee, T-M. & Lui, T-S., 2010 Oct 22, In : Journal of Alloys and Compounds. 508, 2, p. 384-390 7 p.

Research output: Contribution to journalArticle

65 Citations (Scopus)
13 Citations (Scopus)

Building materials effects of al content and physical properties on the electromagnetic interference shielding of sn based coating thin layers

Hung, F. S., Hung, F-Y., Chiang, C. M. & Lui, T-S., 2012 Jan 1, Intelligent Materials, Applied Mechanics and Design Science, IMAMD2011. 3 ed. p. 142-151 10 p. (Applied Mechanics and Materials; vol. 142, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Cell response on the biomimetic scaffold of silicon nano- and micro-topography

Yang, S. P., Wen, H. S., Lee, T. M. & Lui, T. S., 2016 Mar 14, In : Journal of Materials Chemistry B. 4, 10, p. 1891-1897 7 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Characterisation of through-thickness microstructure in centrifugally cast hypereutectic Al-Si and Al-Al3Ni alloys

Song, J. M., Lui, T. S., Chen, L. H., Tsai, Z. S. & Du, J. D., 2002 Jan 1, In : International Journal of Cast Metals Research. 15, 1, p. 55-60 6 p.

Research output: Contribution to journalArticle

Characteristics and bioactivity of CaP porous coating with bio-inspired dopamine

Liu, Y. T., Kung, K. C., Lee, T. M. & Lui, T. S., 2013 Jan 1, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 233-236 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Characteristics and biological responses of novel coatings containing strontium by micro-arc oxidation

Kung, K. C., Lee, T-M., Chen, J. L. & Lui, T-S., 2010 Dec 15, In : Surface and Coatings Technology. 205, 6, p. 1714-1722 9 p.

Research output: Contribution to journalArticle

25 Citations (Scopus)

Characteristics and effects of particle morphology and tensile ductility resulting from FSP of Al-Si-Cu-Ni casting and forging piston

Chuang, H. C., Lui, T. S. & Chen, L. H., 2013 Sep 3, In : Materials Transactions. 54, 8, p. 1373-1380 8 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Characteristics of surface remelted hardfacing spheroidal graphite cast iron using the plasma transferred arc process

Dai, W. S., Lui, T. S. & Chen, L. H., 1999 Jan 1, In : International Journal of Cast Metals Research. 12, 4, p. 233-240 8 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Characteristics of thin-film-transistors based on Zn-In-Sn-O thin films prepared by co-sputtering system

Chen, K. J., Hung, F. Y., Lui, T. S., Chang, S. J. & Liao, T. Y., 2012 Apr 5, In : Materials Transactions. 53, 3, p. 571-574 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Characteristics of W-Ni-Fe-(Cr) in metal injection molding

Hung, F-Y., Lui, T-S. & Chen, L. H., 2005 Dec 1, MPMD Sixth Global Innovations Proceedings - Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metallurgy Res. and Development in the Transportation Industry. Bieler, T. R., Carsley, J. E., Fraser, H. L., Sears, J. W. & Smugeresky, J. E. (eds.). p. 321-331 11 p. (MPMD Sixth Global Innovations Proceedings - Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metall. Research and Development in the Transportation Industry).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characterizations of Cu/Sn-Zn solder/Ag interfaces on photovoltaic ribbon for silicon solar cells

Chen, K. J., Hung, F. Y., Lui, T. S., Chen, L. H. & Chen, Y. W., 2015 Jan 1, In : IEEE Journal of Photovoltaics. 5, 1, p. 202-205 4 p., 6979227.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Charge-discharge mechanism of MgC powders and Mg-Li Alloy thin film materials

Chen, Y. T., Hung, F. Y., Lui, T. S., Xiao, R. S., Tseng, Y. W. & Wang, C. H., 2012 May 15, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. p. 493-497 5 p. (Magnesium Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clarification of the fracture location in friction stir processed AZ31 Mg alloy through examination of globe and miniature specimens

Lee, H. W., Lui, T. S. & Chen, L. H., 2012 Oct 5, In : Materials Transactions. 53, 6, p. 1172-1177 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Compositional effects on the microstructure and vibration fracture properties of Sn-Zn-Bi alloys

Song, J. M., Lui, T-S., Chang, Y. L. & Chen, L. H., 2005 Nov 10, In : Journal of Alloys and Compounds. 403, 1-2, p. 191-196 6 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)
4 Citations (Scopus)

Correlation between microstructural stability and tensile properties of FSWed Al-Mg-Mn cast plate during subsequent thermal exposure

Lin, C. Y., Lui, T. S. & Chen, L. H., 2011 Nov 11, In : Materials Transactions. 52, 8, p. 1667-1673 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Crack propagation behavior of A356 aluminum alloy under resonant vibration

Jiang, D. S., Lui, T-S. & Chen, L. H., 1997 Jan 1, In : Scripta Materialia. 36, 1, p. 15-20 6 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

Crack propagation behavior of A356 and Al-1Si-0.3Mg aluminum alloys under resonant vibration

Jiang, D. S., Lui, T. S. & Chen, L. H., 1999 Apr, In : Unknown Journal. 40, 4, p. 283-289 7 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)