• 2268 Citations
  • 21 h-Index
1800 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Supervised Work

2D塗覆與3D積層製造Mg-Ni負極之高溫充放電特性研究

Author: 慧萍, 陳., 2017 Jul 24

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

3D-SLM製程Ti-6Al-4V合金微觀結構及機械性質研究

Author: 昱霖, 吳., 2017 Jul 20

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

3D雷射積層與熱蒸鍍薄膜之鎂負極顯微組織與充放電機制研究

Author: 嘉政, 洪., 2016 Jul 14

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

A Study on the Surface Characteristics of Porous Oxide Coatings Incorporating Strontium on Titanium by Micro-arc Oxidation

Author: 冠臣, 龔., 2014 Jan 23

Supervisor: Lui, T. (Supervisor)

Student thesis: Doctoral Thesis

Employ Bio-Inspired Surface Modification to Enhance Biological Response of Dental Implant Materials

Author: 嫣婷, 劉., 2014 Aug 14

Supervisor: Lui, T. (Supervisor)

Student thesis: Doctoral Thesis

Mg-1Ca-0 5Zr合金機械性質與表面腐蝕機制探討

Author: 傑丞, 許., 2016 Jul 18

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

SIMA製程AZ61鎂合金壓縮與拉伸及沖剪特性研究

Author: 祉伃, 陳., 2016 Jul 13

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

Sn-Cu及Sn-Cu-Zn光伏銅帶之模組界面組織特性與通電機制研究

Author: 琳, 許., 2016 Aug 2

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

兩階段熱處理對10B21低碳鋼鑽尾自攻螺絲微觀組織與機械性質之影響

Author: 奕, 黃., 2017 Jul 19

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

具奈米鍍鋅層精細鋁矽導線之放電成球機制及打線接合可靠度研究

Author: 冠銘, 朱., 2016 Jul 20

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

固態鎂基鹽質離子導體材料特性與充放電機制研究

Author: 朝政, 許., 2018 Aug 21

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

固溶化處理對4384鋁合金微觀組織與拉伸性質之影響

Author: 修群, 林., 2015 Aug 6

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

固溶熱處理與退火處理對6082鋁合金微觀組織與拉伸性質(常溫至500℃)之影響

Author: 立仁, 余., 2015 Aug 13

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

微細Ag-2Pd-0 2Au合金導線放電結球特性及接合界面通電與熱效應探討

Author: 咏真, 蔡., 2015 Aug 4

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

快速熱處理熱鍛6082鋁合金再結晶及微觀組織演變對拉伸性質效應研究

Author: 意翎, 張., 2019

Supervisor: Lui, T. (Supervisor)

Student thesis: Doctoral Thesis

摩擦攪拌製程及後續T4 -T6熱處理對6082鋁合金微觀組織及拉伸性質之影響

Author: 騰逸, 黃., 2015 Aug 4

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

擠型比及加熱條件對SIMA製程鎂合金(AZ61)之微觀組織變化以及高溫壓縮特性影響探討

Author: 怡良, 葉., 2014 Aug 2

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

新型應變誘導熔漿活化法製程對4384鋁合金微觀組織與沖蝕磨耗特性之影響

Author: 昌佶, 劉., 2017 Jan 16

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

新型應變誘發熔融激化製程下Al-Mg-Si合金之微觀組織演變、機械性質以及沖蝕磨耗特性研究

Author: 佳緯, 林., 2016 Aug 18

Supervisor: Lui, T. (Supervisor)

Student thesis: Doctoral Thesis

旋鍛製程對2024擠形鋁管微觀組織與拉伸機械性質之影響

Author: 炫博, 陳., 2017 Jul 20

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

氯化與硫化及通電循環對電鍍金層Ag-4Pd合金精細導線之打線接合可靠度研究

Author: 承璟, 何., 2019

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

氯化與硫化對金閃積層Ag-Pd-Au合金導線打線接合可靠度研究

Author: 昱賢, 吳., 2018 Aug 15

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

浸鍍與電鍍Sn之Al銲帶應用於光伏模組界面組織特性與通電機制研究

Author: 文宇, 林., 2017 Jul 22

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis

熱處理對3D-SLM Al-10Si-Mg合金微觀組織與拉伸性質及顆粒沖蝕磨耗特性研究

Author: 峻霖, 蔡., 2017 Aug 22

Supervisor: Lui, T. (Supervisor)

Student thesis: Master's Thesis