Yeau-Ren Jeng

Professor

  • 2772 Citations
  • 27 h-Index
1985 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2015

Development of mixed lubrication cold rolling model

Hwu, Y. J., Lee, J. T. & Jeng, Y-R., 2015 Jan 1, Tribology Engineering. Horng, J-H., Wei, C-C. & Hwang, Y-L. (eds.). Trans Tech Publications Ltd, p. 190-195 6 p. (Key Engineering Materials; vol. 642).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Discharge coefficients of inherent orifice-type restrictors in aerostatic bearing analysis

Chang, S. H., Chan, C. W. & Jeng, Y. R., 2015 Jan 1, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

In-situ investigation of lateral junction growth by nanoindentation

Jeng, Y. R., 2014 Jan 1, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), p. 2027-2030 4 p. (5th World Tribology Congress, WTC 2013; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

A strain-rate gradient theory of plasticity and its comparison with strain gradient theories

Alexandrov, S., Lyamina, E. & Jeng, Y-R., 2013 Feb 20, Innovation for Applied Science and Technology. p. 8-12 5 p. (Applied Mechanics and Materials; vol. 284-287).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of innovative algorithm for nanomechanics and its applications to the characterization of materials

Jeng, Y-R., 2013 Jan 1, Deformation and Fracture in Technological Processes. p. 165-196 32 p. (Key Engineering Materials; vol. 528).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading

Alexandrov, S., Lyamina, E. & Jeng, Y-R., 2013 Aug 8, Intelligent Technologies and Engineering Systems. p. 727-734 8 p. (Lecture Notes in Electrical Engineering; vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite element analyses of extrusion with a two stage die and manufacturing of gradient micro-structures

Hwang, Y. M., Alexandrov, S., Jeng, Y-R., Huang, T. H. & Naimark, O. B., 2013 Jan 1, Deformation and Fracture in Technological Processes. p. 23-31 9 p. (Key Engineering Materials; vol. 528).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Novel in-situ formed Al-AlN ultrafine-grained composites prepared from fine nitrided Al powders

Balog, M., Qian, M., Liu, D. S., Jeng, Y. R., Svantner, T. & Simancik, F., 2013 Jan 1, International Powder Metallurgy Congress and Exhibition, Euro PM 2013. European Powder Metallurgy Association (EPMA), (International Powder Metallurgy Congress and Exhibition, Euro PM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Singular solutions in the mechanics of soils

Alexandrov, S. & Jeng, Y. R., 2013 Nov 15, Poromechanics V - Proceedings of the 5th Biot Conference on Poromechanics. p. 1664-1668 5 p. (Poromechanics V - Proceedings of the 5th Biot Conference on Poromechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The time dependent mechanical properties of bovine enamel

Chuang, M. C., Ruan, G. W., Liou, N. S. & Jeng, Y-R., 2013 Jan 1, Mechanics of Biological Systems and Materials - Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics. p. 183-187 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2012

A comparative study of two types of gradient theory of plasticity

Alexandrov, S. & Jeng, Y-R., 2012 Jan 2, Innovation in Materials Science and Emerging Technology. p. 485-488 4 p. (Applied Mechanics and Materials; vol. 145).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A new gradient theory of plasticity for modeling metal forming processes

Alexandrov, S. & Jeng, Y-R., 2012 Jan 1, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 1143-1147 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of intensive plastic deformation near frictional interfaces on ductile fracture

Sergei, A., Dragisa, V., Elena, L. & Jeng, Y-R., 2012 Dec 11, Advanced Materials and Information Technology Processing II. p. 306-309 4 p. (Advanced Materials Research; vol. 586).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Modelling of damage evolution in the vicinity of frictional interfaces in metal forming

Lyamina, E., Alexandrov, S., Jeng, Y-R. & Hwang, Y. M., 2012 Nov 26, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 124-133 10 p. (Advanced Materials Research; vol. 579).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic collapse of a thin annular disk of variable thickness subject to thermo-mechanical loading

Lyamina, E., Alexandrov, S. & Jeng, Y-R., 2012 Jan 1, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Velocity gradients and the evolution of material properties in a narrow layer near surfaces of high friction in metal forming processes

Alexandrov, S. & Jeng, Y-R., 2012 Feb 23, Material Forming ESAFORM 2012. p. 549-554 6 p. (Key Engineering Materials; vol. 504-506).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2011

Developing hyper-viscoelastic constitutive models of porcine meniscus from unconfined compression test data

Liou, N. S., Jeng, Y. R., Chen, S. F., Ruan, G. W. & Wu, K. T., 2011 Jan 1, Mechanics of Biological Systems and Materials - Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, p. 111-115 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigating mechanical properties of porcine articular cartilage by flat plate compression tests

Liou, N. S., Jeng, Y. R., Yen, S. H., Chen, S. F. & Wu, K. T., 2011 Dec 1, Mechanics of Biological Systems and Materials - Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. p. 209-212 4 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Volume fraction effects of silicon carbide on the wear behavior of SiC p-reinforced magnesium matrix composites

Huang, S. J., Dai, Y. Z. & Jeng, Y-R., 2011 Jan 11, New Materials and Advanced Materials. p. 11-18 8 p. (Advanced Materials Research; vol. 152-153).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2010

Antibacterial and tribological behavior of self-assembled monolayer on optical lens

Horng, J. H., Jeng, Y. R., Wei, C. C. & Tasi, Y. T., 2010 Dec 16, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. PART 1 ed. 76552Y. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7655, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Effect of orientation on the convective boiling performance of microchannel heat sink using HFE-7100

Yang, K. S., Jeng, Y. R., Huang, C. M. & Wang, C. C., 2009 Dec 1, IMPACT Conference 2009 International 3D IC Conference - Proceedings. p. 360-363 4 p. 5382191. (IMPACT Conference 2009 International 3D IC Conference - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer and pressure drop characteristics for HFE-7100 within microchannel heat sinks

Huang, C. M., Jeng, Y. R., Yang, K. S., Wang, C. C. & Wu, Y. L., 2009 Dec 1, Proceedings of the 7th International Conference on Nanochannels, Microchannels, and Minichannels 2009, ICNMM2009. PART B ed. p. 1127-1131 5 p. (Proceedings of the 7th International Conference on Nanochannels, Microchannels, and Minichannels 2009, ICNMM2009; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2008

Atomistic simulations of nanoindentation on Cu (111) with a void

Tan, C. M., Jeng, Y-R. & Chiou, Y. C., 2008 Jan 1, Advances in Fracture and Materials Behavior - Selected, peer reviewed papers of the Seventh International Conference on Fracture and Strength of Solids (FEOFS2007). Trans Tech Publications, p. 919-924 6 p. (Advanced Materials Research; vol. 33-37 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact mechanics study in biotribology: A tissue engineering example

Jeng, Y. R., Mao, C. P., Lin, T. T. & Shieh, D. B., 2008 May 16, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. p. 541-543 3 p. (2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007; vol. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Two-phase heat transfer performance of dielectric fluid HFE-7100 within multiport microchannel

Lin, L. Y., Jeng, Y-R. & Wang, C. C., 2008 Aug 20, 2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008. p. 975-980 6 p. (2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008; vol. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

Development of a flexure hinge-based stack-type 5 DOF coplanar nanometer-scale stage

Jywe, W. Y., Jeng, Y-R., Liu, C. H., Teng, Y. F., Wang, H. S. & Fung, R. F., 2007 Dec 1, Advances and Trends in Engineering Materials and their Applications - Proceedings of AES-ATEMA 1st International Conference. p. 307-311 5 p. (AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of the nano-measuring machine stage

Jywe, W. Y., Jeng, Y. R., Teng, Y. F., Wang, H. S. & Wu, C. H., 2007 Dec 1, Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society, IECON. p. 2970-2973 4 p. 4460035. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Theoretical investigation for the material removal rate of metal polishing process

Jeng, Y-R., Huang, P. Y. & Tsai, H. J., 2007 Dec 1, Proceedings of the 35th International MATADOR 2007 Conference. p. 207-210 4 p. (Proceedings of the 35th International MATADOR 2007 Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2006

An experimental study on the effects of abrasive particle sizes on polishing phenomena

Jeng, Y-R. & Huang, P. Y., 2006 Dec 1, Progress on Advanced Manufacture for Micro/Nano Technology 2005 - Proceedings of the 2005 International Conference on Advanced Manufacture. PART 1 ed. p. 301-306 6 p. (Materials Science Forum; vol. 505-507, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An investigation of nanoscale tribological characteristics for different geometrical sliding systems

Jeng, Y. R., Su, C. C. & Tan, C. M., 2006 Dec 1, Progress on Advanced Manufacture for Micro/Nano Technology 2005 - Proceedings of the 2005 International Conference on Advanced Manufacture. PART 2 ed. p. 1045-1050 6 p. (Materials Science Forum; vol. 505-507, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Elastic-plastic contact behavior considering asperity interactions for surfaces with various height distributions

Jeng, Y. R. & Peng, S. R., 2006 Nov 28, Proceedings of STLE/ASME International Joint Tribology Conference, IJTC 2006. (Proceedings of STLE/ASME International Joint Tribology Conference, IJTC 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Predictive modeling of scuffing performance of gear oil with MoOTC using response surface methodology

Jeng, Y. R. & Hwang, S. J., 2006 Jan 1, Progress on Advanced Manufacture for Micro/Nano Technology 2005 - Proceedings of the 2005 International Conference on Advanced Manufacture. PART 1 ed. Trans Tech Publications Ltd, p. 241-246 6 p. (Materials Science Forum; vol. 505-507, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

The characteristic of abrasive particle in chemical - Mechanical polishing

Tsai, H. J., Chang, C. C., Jeng, Y. R. & Chen, S. L., 2006 Dec 1, Progress on Advanced Manufacture for Micro/Nano Technology 2005 - Proceedings of the 2005 International Conference on Advanced Manufacture. PART 2 ed. p. 805-810 6 p. (Materials Science Forum; vol. 505-507, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2005

A material removal rate model considering interracial micro-contact wear behavior for chemical mechanical polishing

Jeng, Y-R. & Huang, P. Y., 2005 Dec 1, Proceedings of the World Tribology Congress III - 2005. p. 239-240 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characteristics of powder lubricated finite-width journal a hydrodynamic analysis

Tsai, H. J. & Jeng, Y. R., 2005 Dec 1, Proceedings of the World Tribology Congress III - 2005. p. 51-52 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nano-particle interaction during chemical-mechanical polishing

Ng, D., Kulkarni, M., Liang, H., Jeng, Y. R. & Huang, P. Y., 2005 Jan 1, Proceedings of the World Tribology Congress III - 2005. American Society of Mechanical Engineers, p. 389-390 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2004

Grain flow for rough surfaces considering elastic/inelastic grain collision

Jeng, Y. R. & Tsai, H. J., 2004 Dec 1, Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004. PART B ed. p. 1353-1360 8 p. (Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of nanoindentation using fem atomic model

Jeng, Y. R. & Tan, C. M., 2004 Dec 1, Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004. PART B ed. p. 1607-1615 9 p. (Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution