3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA)

Liang Chen Kuo, Meng Chung Tsai, Huey Ru Chuang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

3-D FDTD simulation of a planar broadband Ka-band (25-35 GHz) antipodal linearly-tapered slot antenna (ALTSA) and the experimental measurements are presented. The Berenger matched layer absorbing boundary condition (PML-abc) is used for the FDTD computation. A printed ALTSA has been realized by using the RT/Duroid PCB substrate. Good agreement between simulation and measurement were achieved.

Original languageEnglish
Title of host publicationAsia-Pacific Microwave Conference Proceedings, APMC
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1271-1274
Number of pages4
ISBN (Print)0780371380
Publication statusPublished - 2001 Jan 1
Event2001 Asia-Pacific Microwave Conference - Taipei, Taiwan
Duration: 2001 Dec 32001 Dec 6

Publication series

NameAsia-Pacific Microwave Conference Proceedings, APMC
Volume3

Other

Other2001 Asia-Pacific Microwave Conference
CountryTaiwan
CityTaipei
Period01-12-0301-12-06

Fingerprint

Slot antennas
Polychlorinated biphenyls
Boundary conditions
Substrates

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Kuo, L. C., Tsai, M. C., & Chuang, H. R. (2001). 3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA). In Asia-Pacific Microwave Conference Proceedings, APMC (pp. 1271-1274). (Asia-Pacific Microwave Conference Proceedings, APMC; Vol. 3). Institute of Electrical and Electronics Engineers Inc..
Kuo, Liang Chen ; Tsai, Meng Chung ; Chuang, Huey Ru. / 3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA). Asia-Pacific Microwave Conference Proceedings, APMC. Institute of Electrical and Electronics Engineers Inc., 2001. pp. 1271-1274 (Asia-Pacific Microwave Conference Proceedings, APMC).
@inproceedings{72ca54ff6f7d4b548728a40464269a1e,
title = "3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA)",
abstract = "3-D FDTD simulation of a planar broadband Ka-band (25-35 GHz) antipodal linearly-tapered slot antenna (ALTSA) and the experimental measurements are presented. The Berenger matched layer absorbing boundary condition (PML-abc) is used for the FDTD computation. A printed ALTSA has been realized by using the RT/Duroid PCB substrate. Good agreement between simulation and measurement were achieved.",
author = "Kuo, {Liang Chen} and Tsai, {Meng Chung} and Chuang, {Huey Ru}",
year = "2001",
month = "1",
day = "1",
language = "English",
isbn = "0780371380",
series = "Asia-Pacific Microwave Conference Proceedings, APMC",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "1271--1274",
booktitle = "Asia-Pacific Microwave Conference Proceedings, APMC",
address = "United States",

}

Kuo, LC, Tsai, MC & Chuang, HR 2001, 3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA). in Asia-Pacific Microwave Conference Proceedings, APMC. Asia-Pacific Microwave Conference Proceedings, APMC, vol. 3, Institute of Electrical and Electronics Engineers Inc., pp. 1271-1274, 2001 Asia-Pacific Microwave Conference, Taipei, Taiwan, 01-12-03.

3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA). / Kuo, Liang Chen; Tsai, Meng Chung; Chuang, Huey Ru.

Asia-Pacific Microwave Conference Proceedings, APMC. Institute of Electrical and Electronics Engineers Inc., 2001. p. 1271-1274 (Asia-Pacific Microwave Conference Proceedings, APMC; Vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - 3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA)

AU - Kuo, Liang Chen

AU - Tsai, Meng Chung

AU - Chuang, Huey Ru

PY - 2001/1/1

Y1 - 2001/1/1

N2 - 3-D FDTD simulation of a planar broadband Ka-band (25-35 GHz) antipodal linearly-tapered slot antenna (ALTSA) and the experimental measurements are presented. The Berenger matched layer absorbing boundary condition (PML-abc) is used for the FDTD computation. A printed ALTSA has been realized by using the RT/Duroid PCB substrate. Good agreement between simulation and measurement were achieved.

AB - 3-D FDTD simulation of a planar broadband Ka-band (25-35 GHz) antipodal linearly-tapered slot antenna (ALTSA) and the experimental measurements are presented. The Berenger matched layer absorbing boundary condition (PML-abc) is used for the FDTD computation. A printed ALTSA has been realized by using the RT/Duroid PCB substrate. Good agreement between simulation and measurement were achieved.

UR - http://www.scopus.com/inward/record.url?scp=0035728605&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035728605&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0035728605

SN - 0780371380

T3 - Asia-Pacific Microwave Conference Proceedings, APMC

SP - 1271

EP - 1274

BT - Asia-Pacific Microwave Conference Proceedings, APMC

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Kuo LC, Tsai MC, Chuang HR. 3-D FDTD design simulation and experimental measurement of a Ka-band planar antipodal linearly-tapered slot antenna (ALTSA). In Asia-Pacific Microwave Conference Proceedings, APMC. Institute of Electrical and Electronics Engineers Inc. 2001. p. 1271-1274. (Asia-Pacific Microwave Conference Proceedings, APMC).