Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Jiin-Yuh Jang
2020

Experimental and 3-D Numerical Heat Transfer Analyses of Dual Spray Water Nozzle Impingement on a Flat Plate

Gan, Y. F., Chien, C. C., Jang, J. Y. & Lin, C. N., 2020 Aug 1, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 56, 8, p. 2397-2412 16 p.

Research output: Contribution to journalArticle

2018

3-D EHD enhanced natural convection over a horizontal plate flow with optimal design of a needle electrode system

Jang, J. Y. & Chen, C. C., 2018 Jan 1, In : Energies. 11, 7, 1670.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Evaluating the performance of a water-cooled scooter engine through a 3-D numerical and experimental anaysis

Lien, H. P., Jang, J. Y. & Chen, P. K., 2018 Aug 31, In : IOP Conference Series: Materials Science and Engineering. 397, 1, 012005.

Research output: Contribution to journalConference article

Novel Approach to Estimate the Optimum Zone Fuel Mass Flow Rates for a Walking Beam Type Reheating Furnace

Lin, C. N., Luo, Y. P., Jang, J. Y. & Wang, C. H., 2018 May 9, In : Heat Transfer Engineering. 39, 7-8, p. 586-597 12 p.

Research output: Contribution to journalArticle

Optimisation of a slab heating pattern with various skid button heights in a walking-beam-type reheating furnace

Jang, J. Y. & Huang, J. B., 2018 Oct 21, In : Ironmaking and Steelmaking. 45, 9, p. 793-804 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Optimization of the wire electrode height and pitch for 3-D electrohydrodynamic enhanced water evaporation

Leu, J. S., Jang, J. Y. & Wu, Y. H., 2018 Mar, In : International Journal of Heat and Mass Transfer. 118, p. 976-988 13 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2017
1 Citation (Scopus)
2016

A Study of an Effective Heat-Dissipating Piezoelectric Fan for High Heat Density Devices

Lin, C. N., Jang, J. Y. & Leu, J. S., 2016 Jan 1, In : Energies. 9, 8, 610.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Two dimensional thermal-hydraulic analysis for a packed bed regenerator used in a reheating furnace

Lin, C. N., Jang, J. Y. & Lai, Y. S., 2016 Dec, In : Energies. 9, 12, 995.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2015

Optimization of a slab heating pattern for minimum energy consumption in a walking-beam type reheating furnace

Jang, J. Y. & Huang, J. B., 2015 Jun 25, In : Applied Thermal Engineering. 85, p. 313-321 9 p., 6547.

Research output: Contribution to journalArticle

33 Citations (Scopus)

Optimization of louvered-fin heat exchanger with variable louver angles

Jang, J. Y. & Chen, C. C., 2015 Dec 5, In : Applied Thermal Engineering. 91, p. 138-150 13 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)
2014

2-D Transient radiative heat transfer analysis on the slab in a walking-beam-type reheating furnace

Huang, J. B., Jang, J-Y., Lin, C. N. & Wang, C. H., 2014 Jan 1, Mechanics, Mechatronics, Intelligent System and Information Technology. Trans Tech Publications Ltd, p. 993-997 5 p. (Applied Mechanics and Materials; vol. 610).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

3-D numerical heat transfer for confined turbulent twin circular jets impinging on an inclined moving plate

Jang, J-Y. & Huang, J. C., 2014 Jan 1.

Research output: Contribution to conferencePaper

Fractal channel design in a micro methanol steam reformer

Huang, Y. X., Jang, J. Y. & Cheng, C. H., 2014 Feb 4, In : International Journal of Hydrogen Energy. 39, 5, p. 1998-2007 10 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Three dimensional analysis of the slab reheating furnace

Jang, J. Y., Lin, C. N., Lee, C. Y. & Wang, C. H., 2014 Jan 1, Mechanics, Mechatronics, Intelligent System and Information Technology. Trans Tech Publications Ltd, p. 1029-1033 5 p. (Applied Mechanics and Materials; vol. 610).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2013
41 Citations (Scopus)

Optimization of thermoelectric generator module spacing and spreader thickness used in a waste heat recovery system

Jang, J. Y. & Tsai, Y. C., 2013 Jan 1, In : Applied Thermal Engineering. 51, 1-2, p. 677-689 13 p.

Research output: Contribution to journalArticle

81 Citations (Scopus)

Optimization of the span angle and location of vortex generators in a plate-fin and tube heat exchanger

Jang, J-Y., Hsu, L. F. & Leu, J. S., 2013 Sep 18, In : International Journal of Heat and Mass Transfer. 67, p. 432-444 13 p.

Research output: Contribution to journalArticle

64 Citations (Scopus)
2012

Experimental and numerical study of proton exchange membrane fuel cell with spiral flow channels

Jang, J. Y., Cheng, C. H., Liao, W. T., Huang, Y. X. & Tsai, Y. C., 2012 Nov, In : Applied Energy. 99, p. 67-79 13 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Natural convection in fluid/porous region heated from below with conductive partition

Jang, J. Y., Chou, W. C. & Leu, J. S., 2012, In : Journal of thermophysics and heat transfer. 26, 2, p. 367-374 8 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Numerical investigation of nanofluids laminar convective heat transfer through staggered and in-lined tube banks

Huang, J. B. & Jang, J. Y., 2012 Jun 29, Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science. VOL. 1 ed. p. 483-490 8 p. (Advances in Intelligent and Soft Computing; vol. 144 AISC, no. VOL. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Optimal design of parallel channel patterns in a micro methanol steam reformer

Jang, J. Y., Cheng, C. H., Huang, Y. X., Lee, C. I. & Leu, C. H., 2012 Nov 1, In : International Journal of Hydrogen Energy. 37, 22, p. 16974-16985 12 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)

Optimal design of the heat spreader applied thermoelectric module for waste heat recovery

Jang, J-Y., Tsai, Y. C. & Huang, Y. C., 2012 Jul, In : Advanced Science Letters. 14, 1, p. 253-257 5 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Optimization analysis for louver fin heat exchangers

Tsai, Y. C. & Jang, J-Y., 2012 Jun 29, Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science. VOL. 1 ed. p. 477-482 6 p. (Advances in Intelligent and Soft Computing; vol. 144 AISC, no. VOL. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Optimization of spreader spacing and thickness for thermoelectric generators modules for waste heat recovery

Jang, J. Y. & Tsai, Y. C., 2012 Dec 27, Advances and Trends in Engineering Materials and Their Applications - Proceedings of CAN 2012 AES-ATEMA 10th International Conference. p. 55-62 8 p. (AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parametric study and optimization of louver finned-tube heat exchangers by Taguchi method

Hsieh, C. T. & Jang, J-Y., 2012 Sep 1, In : Applied Thermal Engineering. 42, p. 101-110 10 p.

Research output: Contribution to journalArticle

52 Citations (Scopus)
6 Citations (Scopus)
2011

Effects of non-darcian and inlet conditions on the forced convection along a vertical plate with film evaporation

Leu, J. S., Jang, J-Y. & Chou, W. C., 2011 Jan 1, In : Heat Transfer Engineering. 32, 11-12, p. 981-987 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Numerical analysis of sintered particle trajectories in a electrostatic precipitator

Jang, J-Y., Chou, S. C. & Huang, J. B., 2011 May 16, 2011 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2011 - Proceedings. 5748449. (Asia-Pacific Power and Energy Engineering Conference, APPEEC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution