Find Research outputs

Search results

• Analyzing the driving forces behind CO₂ emissions and reduction strategies for energy-intensive sectors in Taiwan, 1996-2006

  Huang, Y. H. & Wu, J. H., 2013 Aug 1, In: Energy. 57, p. 402-411 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Industrial emissions
  • Smart textiles
  • Pulp
  • Petrochemicals
  • Iron
  34 Citations (Scopus)

• Analyzing the disruption resilience of microalgal multi-functional Bioenergy systems using dynamic inoperability input-output modeling

  Benjamin, M. F., Ubando, A. T., Razon, L. & Tan, R. R., 2015 Oct 1, Chemical Engineering Transactions. Liu, X., Varbanov, P. S., Klemes, J. J., Wan Alwi, S. R. & Yong, J. Y. (eds.). Italian Association of Chemical Engineering - AIDIC, Vol. 45. p. 1579-1584 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Dynamical systems
  • Sustainable development
  • Biofuels
  • Recovery
  • Economics
  3 Citations (Scopus)

• Analyzing the disruption resilience of bioenergy parks using dynamic inoperability input–output modeling

  Benjamin, M. F. D., Ubando, A. T., Razon, L. F. & Tan, R. R., 2015 Sep 26, In: Environment Systems and Decisions. 35, 3, p. 351-362 12 p.

  Research output: Contribution to journal › Article › peer-review

  • bioenergy
  • plant component
  • modeling
  • symbiosis
  • energy
  11 Citations (Scopus)

• Analyzing the BTI effect on multi-bit retention registers

  Lin, I. C., Wang, Y. T., Yang, S. S. & Wu, Y. L., 2015 Jan 1, Intelligent Systems and Applications - Proceedings of the International Computer Symposium, ICS 2014. Chu, W. C-C., Yang, S. J-H. & Chao, H-C. (eds.). IOS Press, p. 269-278 10 p. (Frontiers in Artificial Intelligence and Applications; vol. 274).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Temperature
  • Transistors
  • Balloons
  • Threshold voltage
  • Degradation
  2 Citations (Scopus)

• Analyzing the Bridging Effects of Cultural and Creative Industries Policy in Taiwan~ A Perspective from the Cross-Strait Relationship between Taiwan and Mainland China

  Chung, H-L., 2012, The 2012-VII International Conference on Cultural Policy Research, Barcelona. Spain

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Analyzing social event participants for a single organizer

  Jiang, J. Y. & Li, C-T., 2016 Jan 1, Proceedings of the 10th International Conference on Web and Social Media, ICWSM 2016. AAAI Press, p. 599-602 4 p. (Proceedings of the 10th International Conference on Web and Social Media, ICWSM 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Analyzing Multistage Manufacturing Process by Functional Quadratic Regression and LASSO

  Jeng, S-L., 2016 Jun 20, The Fourth International Conference on the Interface between Statistics and Engineering (The 4th ICISE). University of Palermo, Italy

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Analyzing Google trends with travel keyword rankings to predict tourists into a group

  Chang, J-H. & Tseng, C. Y., 2019 Jan 1, In: Journal of Internet Technology. 20, 1, p. 247-256 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Search engines
  • Mean square error
  • Industry
  1 Citation (Scopus)

• Analyzing depression tendency of web posts using an event-driven depression tendency warning model

  Tung, C. & Lu, W., 2016 Jan 1, In: Artificial Intelligence in Medicine. 66, p. 53-62 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Depression
  • Blogs
  • Blogging
  • Bulletin boards
  • Emotions
  12 Citations (Scopus)

• Analyzing BTI effects on retention registers

  Wang, Y. T. & Lin, I-C., 2012 Nov 26, Proceedings of the 4th Asia Symposium on Quality Electronic Design, ASQED 2012. p. 71-77 7 p. 6320478. (Proceedings of the 4th Asia Symposium on Quality Electronic Design, ASQED 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Transistors
  • Threshold voltage
  • Temperature
  • Networks (circuits)

• Analyzing bike repositioning strategies based on simulations for public bike sharing systems: Simulating bike repositioning strategies for bike sharing systems

  Wang, I. L. & Wang, C. W., 2013, Proceedings - 2nd IIAI International Conference on Advanced Applied Informatics, IIAI-AAI 2013. p. 306-311 6 p. 6630365. (Proceedings - 2nd IIAI International Conference on Advanced Applied Informatics, IIAI-AAI 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Air pollution
  • Traffic congestion
  10 Citations (Scopus)

• Analyzing adsorption characteristics of CO ₂ , N ₂ and H ₂ O in MCM-41 silica by molecular simulation

  Chang, S. C., Chien, S. Y., Chen, C. L. & Chen, C. K., 2015 Mar 15, In: Applied Surface Science. 331, p. 225-233 9 p., 29521.

  Research output: Contribution to journal › Article › peer-review

  • MCM-41
  • Multicarrier modulation
  • Silicon Dioxide
  • Silica
  • Carbon Monoxide
  15 Citations (Scopus)

• Analytic study of first-order phase transition in holographic superconductor and superfluid

  Huang, W. H., 2013 Nov 10, In: International Journal of Modern Physics A. 28, 28, 1350140-1.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Analytic solutions for heat conduction in functionally graded circular hollow cylinders with time-dependent boundary conditions

  Lee, S. Y. & Huang, C. C., 2013, In: Mathematical Problems in Engineering. 2013, 816385.

  Research output: Contribution to journal › Article › peer-review

  • Circular Cylinder
  • Circular cylinders
  • Heat Conduction
  • Heat conduction
  • Analytic Solution
  7 Citations (Scopus)

• Analytic solution of angle-ply laminated plates under extension, bending, and torsion

  Ju, S. H., Liang, W. Y., Hsu, H. H. & Tarn, J. Q., 2019 Jan 1, (Accepted/In press) In: Journal of Composite Materials.

  Research output: Contribution to journal › Article › peer-review

  • Torsional stress
  • Laminates
  • Hamiltonians
  • Elasticity
  • Boundary conditions

• Analytic solution and shaking table test on the study of bridge structure with functional bearing system

  Liu, K. Y., Tseng, T. C., Yang, C. Y., Jang, C. L., Chung, L. L. & Chang, K. C., 2016 Mar 1, In: Journal of the Chinese Institute of Civil and Hydraulic Engineering. 28, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Rubber
  • Damping
  • Stiffness
  • Friction
  • Shear strain
  1 Citation (Scopus)

• Analytic estimation for uplink capacity reduction due to co-channel interference in LTE networks

  Chen, W. T., 2015 Aug 25, In: Wireless Networks. 21, 6, p. 1775-1782 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Long Term Evolution (LTE)
  • Throughput
  • Cellular radio systems
  • Outages
  • Communication systems
  1 Citation (Scopus)

• Analytic determination of stress fields in cross-ply symmetric composite laminates

  Liang, W. Y., Ju, S. H. & Tarn, J. Q., 2016 Sep, In: International Journal of Solids and Structures. 94-95, p. 87-99 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Laminates
  • Stress Field
  • laminates
  • stress distribution
  • Material Characterization
  5 Citations (Scopus)

• Analytic Comparison for Channel Response Estimation Based on Time- and Frequency-Domain Pilot Signals

  Chang, M-X., 2015 Sep 1, In: IEEE Transactions on Vehicular Technology. 64, 9, p. 4303-4310 8 p., 6917052.

  Research output: Contribution to journal › Article › peer-review

  • Frequency Domain
  • Time Domain
  • Mean square error
  • Orthogonal Frequency Division multiplexing (OFDM)
  • Minimum Mean Square Error

• Analytical transformation of volume integral for the time-stepping BEM analysis of 2D transient heat conduction in anisotropic media

  Shiah, Y-C., Chaing, Y. C. & Matsumoto, T., 2016 Mar 1, In: Engineering Analysis with Boundary Elements. 64, p. 101-110 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Anisotropic media
  • Transient Heat Conduction
  • Anisotropic Media
  • Boundary element method
  • Heat conduction
  9 Citations (Scopus)

• Analytical transformation of the volume integral in the boundary integral equation for 3D anisotropic elastostatics involving body force

  Shiah, Y. C., 2014 Aug 5, In: Computer Methods in Applied Mechanics and Engineering. 278, p. 404-422 19 p.

  Research output: Contribution to journal › Article › peer-review

  • elastostatics
  • Boundary integral equations
  • Boundary element method
  • Elasticity
  • integral equations
  7 Citations (Scopus)

• Analytical surface-potential calculation in UTBSOI MOSFETs with independent back-gate control

  Khandelwal, S., Chauhan, Y. S., Lu, D., Karim, M. A., Venugopalan, S., Sachid, A., Niknejad, A. & Hu, C., 2012 Aug 17, Nanotechnology 2012: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012. p. 780-783 4 p. (Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Surface potential
  • Bias voltage
  • Computational efficiency

• Analytical solutions of stress singularities in a sectorial plate based on Reissner-Mindlin plate theory

  Chen, C. D., 2014 Nov 17, In: Applied Mathematical Modelling. 39, 23-24, p. 7657-7679 23 p.

  Research output: Contribution to journal › Article › peer-review

  • Reissner-Mindlin Plate
  • Plates (structural components)
  • Mindlin plates
  • Stress Singularity
  • Plate Theory
  5 Citations (Scopus)

• Analytical solution of spray cooling characteristics on a hot surface using the Laplace transform

  Chen, H-T., Lin, J. H., Xu, X. J., Liu, C. S. & Chang, J. R., 2016 Jul 23, In: Inverse Problems in Science and Engineering. 24, 6, p. 957-973 17 p.

  Research output: Contribution to journal › Article › peer-review

  • Spray
  • Cooling
  • Laplace transforms
  • Laplace transform
  • Analytical Solution
  3 Citations (Scopus)

• Analytical solution of soil deformation and fluid pressure change for a two-layer system with an upper unsaturated soil and a lower saturated soil under external loading

  Lo, W. C., Borja, R. I., Deng, J. H. & Lee, J. W., 2020 Sep, In: Journal of Hydrology. 588, 124997.

  Research output: Contribution to journal › Article › peer-review

  • fluid pressure
  • phreatic zone
  • pore pressure
  • porewater
  • vadose zone
  3 Citations (Scopus)

• Analytical Solution of Heat Conduction for Hollow Cylinders with Time-Dependent Boundary Condition and Time-Dependent Heat Transfer Coefficient

  Tu, T. W. & Lee, S. Y., 2015, In: Journal of Applied Mathematics. 2015, 203404.

  Research output: Contribution to journal › Article › peer-review

  • Heat Transfer Coefficient
  • Heat Conduction
  • Heat conduction
  • Heat transfer coefficients
  • Analytical Solution
  10 Citations (Scopus)

• Analytical solution for whirling speeds and mode shapes of a distributed-mass shaft with arbitrary rigid disks

  Wu, J. S., Lin, F. T. & Shaw, H-J., 2014 Jan 1, In: Journal of Applied Mechanics, Transactions ASME. 81, 3, 034503.

  Research output: Contribution to journal › Article › peer-review

  • modal response
  • free vibration
  • rotating shafts
  • Vibration analysis
  • moments of inertia
  2 Citations (Scopus)

• Analytical simulations of the steel-laminated elastomeric bridge bearing

  Wang, R. Z., Chen, S. K., Liu, K-Y., Wang, C. Y., Chang, K. C. & Chen, S. H., 2014 Jan 1, In: Journal of Mechanics. 30, 4, p. 373-382 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Bridge bearings
  • Steel
  • LS-DYNA
  • steels
  • Rubber
  8 Citations (Scopus)

• Analytical prediction of the critical depth of cut and worst spindle speeds for chatter in end milling

  Zheng, C. M., Wang, J. J. J. & Sung, C. F., 2014 Feb, In: Journal of Manufacturing Science and Engineering, Transactions of the ASME. 136, 1, 011003.

  Research output: Contribution to journal › Article › peer-review

  • Frequency response
  15 Citations (Scopus)

• Analytical models for seismic assessment of reinforced concrete bridge pier

  Witarto, Liu, K-Y. & Chang, K. C., 2013 Jan 1, 5th International Conference on Advances in Experimental Structural Engineering, AESE 2013. EUCENTRE, (International Conference on Advances in Experimental Structural Engineering; vol. 2013-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Bridge piers
  • Concrete bridges
  • Analytical models
  • Reinforced concrete
  • Failure modes

• Analytical modeling of residual stress in laser powder bed fusion considering part’s boundary condition

  Mirkoohi, E., Tran, H. C., Lo, Y. L., Chang, Y. C., Lin, H. Y. & Liang, S. Y., 2020 Apr, In: Crystals. 10, 4, 337.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Powders
  • beds
  • residual stress
  • Residual stresses
  • Fusion reactions
  3 Citations (Scopus)

• Analytical modeling and numerical simulations of temperature field in TSV-based 3D ICs

  Shiyanovskii, Y., Papachristou, C. & Wu, C. W., 2013 Jul 5, Proceedings of the 14th International Symposium on Quality Electronic Design, ISQED 2013. p. 24-29 6 p. 6523585. (Proceedings - International Symposium on Quality Electronic Design, ISQED).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Three dimensional integrated circuits
  • Temperature distribution
  • Silicon
  • Computer simulation
  • Orthogonal functions
  2 Citations (Scopus)

• Analytical model for load-displacement curve of slender masonry piers

  Tu, Y-H. & Chuang, T. H., 2013 Nov 28, 15th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures. 台灣 台北, p. 131-139

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Analytical model for capacity curve of confined masonry wing-walls

  Tu, Y-H., Chuang, T. H. & Yeh, H-Y., 2014 Sep 19, 16th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures. p. 205-215

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Analytical model for capacity curve of confined masonry wing-walls

  Tu, Y-H., Chuang, T. H. & Yeh, H-Y., 2014 Oct 16, 5th Asia Conference on Earthquake Engineering. 台灣 台北

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Analytical mechanics modeling of residual stress in laser powder bed considering flow hardening and softening

  Mirkoohi, E., Tran, H. C., Lo, Y. L., Chang, Y. C., Lin, H. Y. & Liang, S. Y., 2020 Apr 1, In: International Journal of Advanced Manufacturing Technology. 107, 9-10, p. 4159-4172 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Residual stresses
  • Mechanics
  • Powders
  • Lasers
  3 Citations (Scopus)

• Analytical estimates of surface conditions in laser surface heating process with experimental data

  Chen, H-T., Lin, J. H. & Xu, X. J., 2013 Oct 7, In: International Journal of Heat and Mass Transfer. 67, p. 936-943 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Industrial heating
  • Lasers
  • surface treatment
  • surface temperature
  • heating
  6 Citations (Scopus)

• Analytical Cracking Resistance and Initial Stiffness of Confined Masonry Wing-walls

  Tu, Y-H., Yeh, H-Y. & Chuang, T. H., 2012 Nov 2, 14th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures. Osaka, Japan, p. 239-248

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Analytical comparison of mean-squares errors for channel response estimation based on frequency- and time-domain pilot signals

  Chang, M-X., Li, C. S., Wei, C. W. & Lee, C. K., 2012, 2012 International Symposium on Wireless Communication Systems, ISWCS 2012 - Proceedings. p. 959-963 5 p. 6328510

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Mean square error
  • symbol
  • time
  • Orthogonal frequency division multiplexing
  • Impulse response
  2 Citations (Scopus)

• Analytical calculations on low-frequency excitations in AA-stacked bilayer graphene

  Chuang, Y. C., Wu, J. Y. & Lin, M-F., 2012 Dec 1, In: Journal of the Physical Society of Japan. 81, 12, 124713.

  Research output: Contribution to journal › Article › peer-review

  • graphene
  • low frequencies
  • excitation
  • interlayers
  • plasmons
  1 Citation (Scopus)

• Analytical-based approach for capacitor placement with gradient error compensation and device correlation enhancement in analog integrated circuits

  Lin, C. W., Lee, C. L., Lin, J. M. & Chang, S. J., 2012, In: IEEE/ACM International Conference on Computer-Aided Design, Digest of Technical Papers, ICCAD. p. 635-642 8 p., 6386738.

  Research output: Contribution to journal › Conference article › peer-review

  • Analog integrated circuits
  • Error compensation
  • Capacitors
  • Capacitance
  • Simulated annealing
  8 Citations (Scopus)

• Analytical approach for estimating CO ₂ storage capacity of produced gas reservoirs with or without a water drive

  Tseng, C. C., Hsieh, B. Z., Hu, S. T. & Lin, Z. S., 2012 Jul, In: International Journal of Greenhouse Gas Control. 9, p. 254-261 8 p.

  Research output: Contribution to journal › Article › peer-review

  • gas reservoir
  • Gases
  • Water
  • water
  • gas
  3 Citations (Scopus)

• Analytical and numerical modeling methods for electrochemical impedance analysis of single cells on coplanar electrodes

  Tsai, S. L., Wang, M. H., Chen, M. K. & Jang, L. S., 2014 Feb 1, In: Electroanalysis. 26, 2, p. 389-398 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Electrodes
  • Acoustic impedance
  • Fluids
  • Electric current distribution
  • Capacitance
  10 Citations (Scopus)

• Analytical and experimental investigation of hydrodynamic performance and chamber optimization of oscillating water column system

  Chang, C. Y., Chou, F. N. F., Chen, Y. Y., Hsieh, Y. C. & Chang, C. T., 2016 Oct 15, In: Energy. 113, p. 597-614 18 p.

  Research output: Contribution to journal › Article › peer-review

  • Hydrodynamics
  • Amplification
  • Water
  • Fences
  • Planning
  7 Citations (Scopus)

• Analysis on the black hole formations inside old neutron stars by isospin-violating dark matter with self-interaction

  Lin, G. L. & Lin, Y. H., 2020 Aug, In: Journal of Cosmology and Astroparticle Physics. 2020, 8, 022.

  Research output: Contribution to journal › Article › peer-review

  • neutron stars
  • dark matter
  • interactions
  • protons
  • baryons
  1 Citation (Scopus)

• Analysis on numbers and adaptive ranges of resonators for efficient resonant coupling wireless power transmission

  Yang, C. W. & Yang, C. L., 2014, IEEE Wireless Power Transfer Conference 2014, IEEE WPTC 2014. IEEE Computer Society, p. 255-258 4 p. 6839557. (IEEE Wireless Power Transfer Conference 2014, IEEE WPTC 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Inductive power transmission
  • Resonators
  2 Citations (Scopus)

• Analysis on milling stability performed under the conditions of positive and negative process stiffness

  Hsiao, T. C., Huang, C. Y. & Junz Wang, J. J., 2013, Materials Design, Processing and Applications. p. 2408-2421 14 p. (Advanced Materials Research; vol. 690 693).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Stiffness
  • Dynamic models

• Analysis on microclimate and construction of the vernacular architecture in Minangkabau of Sumatra, Indonesia

  Ng, T. N. & Lin, H. T., 2012, Advances in Environmental Science and Engineering. p. 4455-4460 6 p. (Advanced Materials Research; vol. 518-523).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Roofs
  • Zinc
  • Atmospheric humidity
  • Temperature
  1 Citation (Scopus)

• Analysis on machine tool systems using spindle vibration monitoring for automatic tool changer

  Chen, S. L., Cheng, Y. T. & Su, C. F., 2015 Dec, In: Advances in Mechanical Engineering. 7, 12, 15620331.

  Research output: Contribution to journal › Article › peer-review

  • Intelligent systems
  • Machine tools
  • Machinery
  • Computer hardware
  • Monitoring
  3 Citations (Scopus)

• Analysis on controlling factors for the synthesis of carbon nanotubes and nano-onions in counterflow diffusion flames

  Hu, W. C., Hou, S. S. & Lin, T-H., 2014 Jan 1, In: Journal of Nanoscience and Nanotechnology. 14, 7, p. 5363-5369 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Carbon Nanotubes
  • counterflow
  • diffusion flames
  • Carbon nanotubes
  • carbon nanotubes
  12 Citations (Scopus)