Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Mi-Ching Tsai
Conference contribution

Planning and implementation of motion trajectory based on C 2 PH spline

Liu, I. H., Cheng, M-Y., Tsai, M-C. & Su, K. H., 2011 Dec 1, Proceedings: IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society. p. 246-251 6 p. 6119319. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Position-dependent repetitive control for speed ripple reduction of ultrasonic motor

Chen, C. L. & Tsai, M. C., 2014 Jan 1, 19th IFAC World Congress IFAC 2014, Proceedings. Xia, X. & Boje, E. (eds.). IFAC Secretariat, p. 1754-1759 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Repetitive controller for speed ripple reduction of ultrasonic motors

Chen, C. L., Tsai, M-C. & Hsiao, S. W., 2013, 2013 CACS International Automatic Control Conference, CACS 2013 - Conference Digest. p. 501-505 5 p. 6734186

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Research of Axial-Radial Flux Permanent Magnet Integrated Starter/Generator Based on Dual Air-Gap Design

Tsai, M. K., Huang, P. W. & Tsai, M. C., 2018 Nov 27, ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems. Institute of Electrical and Electronics Engineers Inc., p. 261-264 4 p. 8549432. (ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on Adaptive Direct Torque Control Based on Online Parameter Estimation Applied to Surface Permanent Magnet Motor

Cheng, L. J., Wu, I. H. & Tsai, M. C., 2019 Nov, 2019 IEEE 4th International Future Energy Electronics Conference, IFEEC 2019. Institute of Electrical and Electronics Engineers Inc., 9015012. (2019 IEEE 4th International Future Energy Electronics Conference, IFEEC 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Retracted Article: A Novel Measurement for Monitoring Mechanical Impedance Applied to Breakthrough Detection of Bone-Drill System

Ko, P. J. & Tsai, M. C., 2018 Nov 16, 2017 5th International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2017. Institute of Electrical and Electronics Engineers Inc., p. 133-137 5 p. 8540168. (2017 5th International Conference on Mechanical, Automotive and Materials Engineering, CMAME 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding position detection of touchscreen with piezoelectric cantilever

Chen, Y. M., Tsai, M. C. & Wang, S. H., 2015 Jun 1, ICNSC 2015 - 2015 IEEE 12th International Conference on Networking, Sensing and Control. Institute of Electrical and Electronics Engineers Inc., p. 236-240 5 p. 7116041. (ICNSC 2015 - 2015 IEEE 12th International Conference on Networking, Sensing and Control).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchronized motion control for 2D joystick-based electric wheelchair driven by two wheel motors

Tsai, M-C. & Hsueh, P. W., 2012 Oct 5, AIM 2012 - 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Conference Digest. p. 702-707 6 p. 6266027. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Synchronized Motion Control for Electronic Differential System via Planetary Gear Mechanism

Chen, G. W., Tu, T. K., Chen, C. L. & Tsai, M. C., 2019 Nov, 2019 International Automatic Control Conference, CACS 2019. Institute of Electrical and Electronics Engineers Inc., 9024359. (2019 International Automatic Control Conference, CACS 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tension control improvement in automatic stator in-slot winding machines using iterative learning control

Lu, J. S., Chen, H. R., Cheng, M-Y., Su, K. H., Cheng, L. W. & Tsai, M-C., 2014 Nov 5, Proceedings - 2014 International Conference on Information Science, Electronics and Electrical Engineering, ISEEE 2014. Li, S., Cheng, Y., Dai, Y. & Jiang, X. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 1643-1647 5 p. 6946200. (Proceedings - 2014 International Conference on Information Science, Electronics and Electrical Engineering, ISEEE 2014; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Torque control of power-assisted bike via planetary gear mechanism

Chen, C. L. & Tsai, M. C., 2017 Oct 2, 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017. Institute of Electrical and Electronics Engineers Inc., 8056232. (2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)
Editorial

Introduction

Tsai, M. C. & Gu, D. W., 2014 Jan 1, In : Advances in Industrial Control. 9781447162568, p. 1-5 5 p.

Research output: Contribution to journalEditorial

Paper

Development of vehicle collision avoidance system based on impedance control approach

Chen, C. L., Tsai, M. C., Wang, K. L., Hu, J. S. & Liu, Y. C., 2018 Jan 1.

Research output: Contribution to conferencePaper

Patent

以三維列印製造之導磁性元件

Tsai, M-C. & Lee, W-S., 2016 Sep 1, Patent No. I549399

Research output: Patent

兼具沖壓及鍛造功能的伺服複合加工機

Tsai, M-C., 2015 Jun 3, Patent No. ZL201310616036.8

Research output: Patent

變結構馬達之驅動與切換方法

Tsai, M-C. & Cheng, M-Y., 2011 Apr 16, Patent No. I393342

Research output: Patent

Review article

Creative mechanism design of magnetic gears integrated with continuously variable transmissions

Wu, Y. C., Tsai, M. C. & Chan, C. T., 2018 May 1, In : Advances in Mechanical Engineering. 10, 5

Research output: Contribution to journalReview article

1 Citation (Scopus)