Find Research outputs

Search results

• Paper

  Dual mode LCDs with multistable and dynamic modes

  Huang, C. Y., Lai, C. C., Tseng, Y. H., Yang, Y. T., Tien, C. J. & Lo, K-Y., 2008 Dec 1, p. 1551-1554. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• DuLASP: A workload-aware flash translation layer exploiting both temporal and spatial localities

  ChangCheng, C. T., Chen, H. H. & Chang, D. W., 2012, p. 388-391. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Duration-embedded Bi-HMM for expressive voice conversion

  Hsia, C. C., Wu, C-H. & Liu, T. H., 2005 Dec 1, p. 1921-1924. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Dynamic Collision Resolution and Traffic Scheduling for DOCSIS Systems with QoS Support

  Kuo, W. K., Kumar, S. & Jay Kuo, C. C., 2003, p. 3894-3898. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• DYNAMIC COMPUTER CONTROL OF A ROBOT LEG.

  Orin, D. E., Tsai, C. K. & Cheng, F. T., 1983, p. 256-262. 7 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Dynamic eigenvalue analysis of a self-excited induction generator feeding an induction motor

  Kuo, S. C. & Wang, L., 2001 Dec 1, p. 1393-1397. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  17 Citations (Scopus)

• Dynamic fleet management under real-time information

  Liao, T. Y., Hu, T-Y. & Kuo, H. H., 2006 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• Dynamic mathematical model of the knee joint applied to isokinetic exercise

  Kaufman, K. R., An, K. N. & Chao, E. Y. S., 1988, p. 157-167. 11 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Dynamic method for magnetic torque measurement using pendulum motion system

  Lin, C. E., Jou, H. L. & Yan, J. H., 1994 Dec 1, p. 376-379. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Dynamic model of a compliant link with large deflection and shear deformation

  Lan, C. C. & Lee, K. M., 2005 Nov 16, p. 729-734. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Dynamic response of shear-deformable axisymmetric orthotropic circular plate structures solved by the DQEM and EDQ based time integration schemes

  Chen, C-N., 2003 Dec 17, p. 233-243. 11 p.

  Research output: Contribution to conference › Paper › peer-review

• Dynamic response of square foundation vibration using 3D boundary element method

  Ni, S. H. & Tsai, P. S., 1997 Jan 1, p. 815-820. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Dynamics combustion characteristics in scramjet combustors with transverse fuel injection

  Choi, J. Y., Ma, F. & Yang, V., 2005.

  Research output: Contribution to conference › Paper › peer-review
  15 Citations (Scopus)

• Dynamic stability enhancement of nuclear power plants of Taiwan Power System using STATCON

  Wang, L. & Tsai, Z. Y., 1999 Jan 1, p. 604-609. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Effective suppression method of three-phase transformer's inrush current

  Cheng, C. L., Lin, C. E., Hou, K. C. & Hsia, Y. F., 2002, p. 2030-2033. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Effect of backpressure on internal flow dynamics and spray characteristics of liquid swirl injector

  Chen, X., Liu, Y. & Yang, V., 2011.

  Research output: Contribution to conference › Paper › peer-review
  5 Citations (Scopus)

• Effect of calcinated CaO on expansion of cement paste

  Hsuan, L. T., Shih, P. H., Chen, Y. L., Choi, C. M. & Chang, J. E., 2017 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• Effect of external ground surface materials on indoor thermal comfort

  Lin, T. P., Hwang, R. L. & Cheng, M. J., 2006 Dec 1, p. I495-I498.

  Research output: Contribution to conference › Paper › peer-review

• Effect of fault dependency and debugging time lag on software error models

  Huang, C. Y., Lin, C. T., Lo, J. H. & Sue, C. C., 2004, p. B243-B246.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• Effect of flow swirling on a vortex flowmeter

  Miau, J-J., Chen, Y. S., Chou, J-H. & Hsieh, W. D., 1997 Jan 1.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Effect of nitrogen release from accumulators on PWR LOCA analysis

  Yeung, W. S. & Sundaram, R. K., 2002, p. 123-129. 7 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Effect of steady flow potential on the ship motions in waves

  Fang, M. C. & Liao, P. Y., 1999 Jan 1, p. 621-628. 8 p.

  Research output: Contribution to conference › Paper › peer-review

• Effect of surface treatment on the morphological aspect of metal dusting on stainless steel

  Lin, C. Y., Chang, C. H. & Tsai, W. T., 2004 Dec 1.

  Research output: Contribution to conference › Paper › peer-review

• Effect of Ta₂N crystallinity on diffusion barrier properties

  Chung, H. C. & Liu, C. P., 2003 Jan 1, p. 161-166. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Effect of thickness to grain size ratio on drawability for micro deep drawing of AISI 304 stainless steel

  Lee, R-S., Chen, C. H. & Gau, J. T., 2008 Jan 1, p. 183-188. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  16 Citations (Scopus)

• Effects of acoustic oscillations on turbulent flowfield in a porous chamber with surface transpiration

  Apte, S. & Yang, V., 1998.

  Research output: Contribution to conference › Paper › peer-review
  11 Citations (Scopus)

• EFFECTS OF BOUNDARY CONDITIONS ON THE VIBRATION OF TRANSVERSE ISOTROPIC THICK PLATES.

  Chen, L-W., Doong, J. L. & Ye, T. Y., 1982 Dec 1, p. 319-325. 7 p.

  Research output: Contribution to conference › Paper › peer-review

• Effects of compression distribution on PEMFC stacks using reformate as fuel

  Huang, K. J., Chen, C. Y., Hwang, S. J. & Lai, W. H., 2012, p. 234-243. 10 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• EFFECTS OF FREE CONVECTION AND MASS TRANSFER ON THE STOKES' SECOND PROBLEM FOR AN INFINITE VERTICAL PLATE.

  Wu, C-Y., Chen, C. K. & Lien, F. S., 1983 Dec 1. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Effects of fuel-injection parameters in a side-dump ramjet combustor

  Jiang, T-L. & Shen, C. H., 1998 Jan 1.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• Effects of Lewis number on the blowout process of jet flames

  Chao, Y. C., Wu, C. Y., Chen, R. H., Lee, K. Y. & Cheng, T. S., 2002 Dec 1. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• EFFECTS OF MEASUREMENT ERRORS IN DESCRIBING HUMAN JOINT MOTION.

  Crippen, T. E., An, K. N. & Takahashi, K., 1982, p. 178-182. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Effects of membrane vibration on performance of nebulization

  Lin, T. C., Shen, Y. J. & Wang, M. R., 2015.

  Research output: Contribution to conference › Paper › peer-review

• Effects of non-equilibrium plasma discharge on ignition and LTC of DME/O₂/Ar mixtures: A numerical investigation

  Zhang, Y., Yang, S., Sun, W. & Yang, V., 2017.

  Research output: Contribution to conference › Paper › peer-review
  5 Citations (Scopus)

• Effects of passivation and extraction trap density on the 1/f noise of HgCdTe photoconductive detector

  Lin, C. T., Su, Y. K., Huang, H. T., Chang, S. J., Chen, G. S., Sun, T. P. & Luo, J. J., 1997, p. 168-174. 7 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Effects of post-growth annealing treatment on the photoluminescence of ZnO nanorods

  Wang, D., Sathitsuksanoh, N., Yang, H. Y., Seo, H. W., Tzeng, Y. H., Tin, C. C., Bozack, M. J., Williams, J. R. & Park, M., 2005, p. 11075-11083. 9 p.

  Research output: Contribution to conference › Paper › peer-review

• Effects of processing parameters on fiber length distribution and tensile strength of long glass fiber reinforced Nylon66 composites molded parts

  Huang, P. W., Peng, H. S., Hwang, S. J., Huang, C. T., Wu, C. C. & Tu, C. I., 2018 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• Effects of substrate geometry on performance of twin-fluid atomizer in metal powder production

  Wang, M. R., Yang, C. J., Huang, J. D., Lin, T. C. & Sheu, M. S., 2006.

  Research output: Contribution to conference › Paper › peer-review

• Effects of the fines content in soil on stress attenuation during dynamic compaction

  Chen, J. W. & Lin, C. Y., 2002 Dec 1, p. 616-621. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Effects of the incidence angle and surface type on the LiDAR intensity value

  Wu, Y. T. & Wang, C-K., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• Effects of water injection on nitric oxide emission of a single cylinder port injection spark ignition gasoline engine

  Li, J. L., Wu, M. H., Chen, R. H., Lin, T. H. & Wang, J. K., 2009.

  Research output: Contribution to conference › Paper › peer-review

• Efficiency and throughput analysis of delayed-acknowledgement in WPANs

  Liu, K. H., Rutagemwa, H., Shen, X., Mark, J. W. & Ho, P. H., 2005 Dec 1, p. 565-572. 8 p.

  Research output: Contribution to conference › Paper › peer-review

• Efficient content placement and management on cluster-based Web servers

  Yang, C-S. & Luo, M. Y., 2000 Jan 1, p. 463-476. 14 p.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• Efficient data retrieval scheme to improve service capacity of a VBR video server

  Tsao, S. L., Huang, Y-M., Liou, S. C., Lin, J. C., Ding, J. W., Wang, J. M. & Wang, H. L., 1997 Dec 1, p. 1088-1092. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Efficient deinterlacing algorithm using directional interpolation

  Hou, T-W., Ku, H. K., Sun, K. H. & Koo, H. S., 2007 Dec 1, p. 1451-1454. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Efficient hardware design approach from system-level specification

  Sheu, M. H., Shieh, M-D., Liu, S. W. & Dou, C., 1997 Dec 1, p. 1213-1216. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Efficient method for obtaining the general solution for the force balance equations with hard point contacts

  Cheng, F. T., 1996 Dec 1, p. 1896-1901. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Efficient prefetch-buffer scheme for VBR video servers

  Huang, Y. M. & Tsao, S. L., 1997 Dec 1, p. 908-911. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Efficient scissoring scheme for scanline-based rendering of 2D vector graphics

  Lin, W. C., Ye, J. H., Yang, D. W., Huang, S. Y., Shieh, M-D. & Wang, J., 2012 Sep 28, p. 766-769. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Efficient support for content-based routing in web server clusters

  Yang, C. S. & Luo, M. Y., 1999.

  Research output: Contribution to conference › Paper › peer-review
  51 Citations (Scopus)