Find Research Outputs

Search results

• Optimization of metal powder production by gas atomization processes with internal-mixing mechanism

  Wang, M. R., Lai, T. S., Lin, T. C., Chiu, C. H., Yang, C. J. & Sheu, M. S., 2005 Jun 1, In: Zhongguo Hangkong Taikong Xuehui Huikan/Transactions of the Aeronautical and Astronautical Society of the Republic of China. 37, 2, p. 153-162 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Powder metals
  • Atomization
  • Gases
  • Powders
  • Taguchi methods
  5 Citations (Scopus)

• Optimization of material composition to minimize the thermal stresses induced in FGM plates with temperature-dependent material properties

  Ding, S. & Wu, C. P., 2018 Dec 1, In: International Journal of Mechanics and Materials in Design. 14, 4, p. 527-549 23 p.

  Research output: Contribution to journal › Article › peer-review

  • Functionally graded materials
  • Distribution functions
  • Thermal stress
  • Materials properties
  • Chemical analysis
  4 Citations (Scopus)

• Optimization of magnetic labeling process for intracellular hyperthermia in cervical cancer cells

  Huang, C. Y., Chen, P. J., Ger, T. R., Hu, K. H., Peng, Y. H., Fu, P. W., Chen, J. Y. & Wei, Z. H., 2014 Jan, In: IEEE Transactions on Magnetics. 50, 1, 2279482.

  Research output: Contribution to journal › Article › peer-review

  • Cytotoxicity
  • Nanoparticles
  • Labeling
  • Cells
  • ferric ferrocyanide
  7 Citations (Scopus)

• Optimization of lutein production with a two-stage mixotrophic cultivation system with Chlorella sorokiniana MB-1

  Chen, C. Y. & Liu, C. C., 2018 Aug, In: Bioresource technology. 262, p. 74-79 6 p.

  Research output: Contribution to journal › Article › peer-review

  • cultivation system
  • Lutein
  • Productivity
  • productivity
  • Biomass
  13 Citations (Scopus)

• Optimization of louvered-fin heat exchanger with variable louver angles

  Jang, J. Y. & Chen, C. C., 2015 Dec 5, In: Applied Thermal Engineering. 91, p. 138-150 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Heat exchangers
  • Computer simulation
  • Conjugate gradient method
  • Infrared radiation
  • Temperature distribution
  36 Citations (Scopus)

• Optimization of laser-driven cylindrical implosions on the OMEGA laser

  Hansen, E. C., Barnak, D. H., Chang, P. Y., Betti, R., Campbell, E. M., Davies, J. R., Knauer, J. P., Peebles, J. L., Regan, S. P. & Sefkow, A. B., 2018 Dec 1, In: Physics of Plasmas. 25, 12, 122701.

  Research output: Contribution to journal › Article › peer-review

  • implosions
  • optimization
  • lasers
  • simulation
  • x rays
  5 Citations (Scopus)

• Optimization of key parameters in the proton exchange membrane fuel cell

  Lin, H. H., Cheng, C-H., Soong, C. Y., Chen, F. & Yan, W. M., 2006 Nov 8, In: Journal of Power Sources. 162, 1, p. 246-254 9 p.

  Research output: Contribution to journal › Article › peer-review

  • fuel cells
  • Proton exchange membrane fuel cells (PEMFC)
  • Porosity
  • membranes
  • porosity
  39 Citations (Scopus)

• Optimization of geometrical parameters for Stirling engines based on theoretical analysis

  Cheng, C. H. & Yang, H. S., 2012 Apr, In: Applied Energy. 92, p. 395-405 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Stirling engines
  • engine
  • Engines
  • shaft
  • parameter
  72 Citations (Scopus)

• Optimization of gene transfection condition using taguchi method for an electroporation microchip

  Huang, K. S., Yang, S. C., Chen, H. Y. & Lin, Y. C., 2007 Dec 1, TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 847-850 4 p. 4300263. (TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electroporation
  • Taguchi methods
  • Genes
  • Cells
  • Electrodes
  3 Citations (Scopus)

• Optimization of gate-on-source-only tunnel FETs with counter-doped pockets

  Kao, K. H., Verhulst, A. S., Vandenberghe, W. G., Sorée, B., Magnus, W., Leonelli, D., Groeseneken, G. & De Meyer, K., 2012 Jul 3, In: IEEE Transactions on Electron Devices. 59, 8, p. 2070-2077 8 p., 6226449.

  Research output: Contribution to journal › Article › peer-review

  • Quantum confinement
  • Field effect transistors
  • Tunnels
  • Tunnel field effect transistors
  • Oxides
  87 Citations (Scopus)

• Optimization of gas atomization processes in production of ultra-fine solder powder

  Lin, T-C., Wang, M. R., Lai, T. S. & Sheu, M. S., 2006 Dec 1.

  Research output: Contribution to conference › Paper › peer-review

  • Atomization
  • Powders
  • Soldering alloys
  • Powder metals
  • Gases

• Optimization of food waste hydrothermal liquefaction by a two-step process in association with a double analysis

  Chen, W. H., Lin, Y. Y., Liu, H. C. & Baroutian, S., 2020 May 15, In: Energy. 199, 117438.

  Research output: Contribution to journal › Article › peer-review

  • Liquefaction
  • food waste
  • liquefaction
  • Optimization
  • Analysis of variance (ANOVA)
  2 Citations (Scopus)

• Optimization of experimental conditions in preparation of manganese oxide electrodes for electrochemical capacitors

  Liang, C. H., Hwang, C. S. & Yoshimura, M., 2007 Jun, In: Journal of the Ceramic Society of Japan. 115, 1342, p. 349-353 5 p.

  Research output: Contribution to journal › Article › peer-review

  • manganese oxide
  • Manganese oxide
  • electrochemical capacitors
  • manganese oxides
  • Capacitors
  3 Citations (Scopus)

• Optimization of experimental conditions based on Taguchi robust design for the preparation of nano-sized TiO₂ particles by solution combustion method

  Wang, C. M., Wu, H. & Chung, S. L., 2006 Aug 1, In: Journal of Porous Materials. 13, 3, p. 307-314 8 p.

  Research output: Contribution to journal › Article › peer-review

  • titanium dioxide
  • Nitrates
  • Glycine
  • Titanium
  • Amino acids
  17 Citations (Scopus)

• Optimization of engineering tolerance design using revised loss functions

  Pan, J. N. & Pan, J., 2009 Feb, In: Engineering Optimization. 41, 2, p. 99-118 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Loss Function
  • Tolerance
  • Engineering
  • Optimization
  • Design
  17 Citations (Scopus)

• Optimization of DNA-directed immobilization on mixed oligo(ethylene glycol) monolayers for immunodetection

  Hu, W. P., Huang, L. Y., Kuo, T. C., Hu, W. W., Chang, Y., Chen, C. S., Chen, H. C. & Chen, W. Y., 2012 Apr 1, In: Analytical Biochemistry. 423, 1, p. 26-35 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Monolayers
  • Protein Array Analysis
  • Ethylene Glycol
  • Immobilization
  • Single-Stranded DNA
  13 Citations (Scopus)

• Optimization of corrugated bulkhead forms by genetic algorithm

  Yang, J-M. & Hwang, C. N., 2002, In: Journal of Marine Science and Technology. 10, 2, p. 146-153 8 p.

  Research output: Contribution to journal › Article › peer-review

  • genetic algorithm
  • Genetic algorithms
  • cost
  • Costs
  • linear programing
  7 Citations (Scopus)

• Optimization of conditions for protease production by Chryseobacterium taeanense TKU001

  Wang, S. L., Yang, C. H., Liang, T. W. & Yen, Y. H., 2008 Jun 1, In: Bioresource technology. 99, 9, p. 3700-3707 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Peptide Hydrolases
  • shell
  • surfactant
  • nitrogen
  • organic solvent
  54 Citations (Scopus)

• Optimization of channel width distribution of a gas flow field by integrating computational fluid dynamics code with a simplified conjugate-gradient method

  Jang, J-Y., Cheng, C-H. & Huang, Y. X., 2010 Jan 21, In: Energy and Fuels. 24, 1, p. 570-580 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Conjugate gradient method
  • Flow of gases
  • Flow fields
  • Computational fluid dynamics
  • Flow rate
  7 Citations (Scopus)

• Optimization of capital budgeting for interrelated capacity expansion projects

  Haghani, A. E. & Wei, C. H., 1993 Dec 1, Transportation Research Record. 1400 ed. p. 27-35 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Budget control
  • Computational efficiency
  • Program processors
  1 Citation (Scopus)

• Optimization of biodiesel production from transesterification of triolein using zeolite LTA catalysts synthesized from kaolin clay

  Đặng, T. H., Chen, B. H. & Lee, D. J., 2017 Oct, In: Journal of the Taiwan Institute of Chemical Engineers. 79, p. 14-22 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Zeolites
  • Triolein
  • Biofuels
  • Kaolin
  • Clay
  21 Citations (Scopus)

• Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology

  Milano, J., Ong, H. C., Masjuki, H. H., Silitonga, A. S., Chen, W. H., Kusumo, F., Dharma, S. & Sebayang, A. H., 2018 Feb 15, In: Energy Conversion and Management. 158, p. 400-415 16 p.

  Research output: Contribution to journal › Article › peer-review

  • Microwave irradiation
  • Transesterification
  • Cooking
  • Biodiesel
  • Oils
  83 Citations (Scopus)

• Optimization of bent wire antennas using genetic algorithms

  Lee, K. C., 2002 Jan 1, In: Journal of Electromagnetic Waves and Applications. 16, 4, p. 515-522 8 p.

  Research output: Contribution to journal › Article › peer-review

  • genetic algorithms
  • antennas
  • Wire
  • wire
  • Genetic algorithms
  1 Citation (Scopus)

• Optimization of back side cleaning process to eliminate copper contamination

  Chou, W. Y., Tsui, B. Y., Kuo, C. W. & Kang, T. K., 2005, In: Journal of the Electrochemical Society. 152, 2, p. G131-G137

  Research output: Contribution to journal › Article › peer-review

  • Copper
  • Contamination
  • Cleaning
  • Atoms
  • Industrial Oils
  7 Citations (Scopus)

• Optimization of axially compressed laminated curved panels with cutouts

  Hu, H. T. & Peng, H. W., 2012 Dec 1, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2012-1390. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fiber reinforced materials
  • Laminated composites
  • Aspect ratio

• Optimization of axially compressed laminated curved panels with cutouts

  Hu, H. T. & Peng, H. W., 2012, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2012. American Institute of Aeronautics and Astronautics Inc., (53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • curved panels
  • Fiber reinforced materials
  • fiber orientation
  • optimization
  • Laminated composites

• Optimization of a stirling engine by variable-step simplified conjugate-gradient method and neural network training algorithm

  Cheng, C. H. & Lin, Y. T., 2020 Oct, In: Energies. 13, 19, 5164.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Training Algorithm
  • Network Algorithms
  • Stirling engines
  • Conjugate gradient method
  • Engine

• Optimization of a slab heating pattern for minimum energy consumption in a walking-beam type reheating furnace

  Jang, J. Y. & Huang, J. B., 2015 Jun 25, In: Applied Thermal Engineering. 85, p. 313-321 9 p., 6547.

  Research output: Contribution to journal › Article › peer-review

  • Furnaces
  • Heating
  • Energy utilization
  • Preheating
  • Temperature
  36 Citations (Scopus)

• Optimization of a pulsed carbon dioxide snow jet for cleaning CMOS image sensors by using the Taguchi method

  Yang, S. C., Huang, K. S. & Lin, Y. C., 2007 Sep 12, In: Sensors and Actuators, A: Physical. 139, 1-2 SPEC. ISS., p. 265-271 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Dry Ice
  • Taguchi methods
  • snow
  • Snow
  • Oxide semiconductors
  26 Citations (Scopus)

• Optimization of an optical inspection system based on the taguchi method for quantitative analysis of point-of-care testing

  Yeh, C. H., Zhao, Z. Q., Shen, P. L. & Lin, Y. C., 2014 Sep 1, In: Sensors (Switzerland). 14, 9, p. 16148-16158 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Gonadotropins
  • Taguchi methods
  • Point-of-Care Testing
  • Optical Devices
  • Chorionic Gonadotropin
  9 Citations (Scopus)

• Optimization of an optical disk manufacturing process for polymer microfluidic substrates by using the design of experiment methodology

  Wu, C. H., Hsu, W. S., Fan, K. W., Lin, Y. L. & Lin, Y-C., 2010 Jan 1, In: Journal of Micro/Nanolithography, MEMS, and MOEMS. 9, 3, 031011.

  Research output: Contribution to journal › Article › peer-review

  • experiment design
  • optical disks
  • Microfluidics
  • Mirrors
  • Molding
  2 Citations (Scopus)

• Optimization of an MRT train schedule: Reducing maximum traction power by using genetic algorithms

  Chen, J-F., Lin, R-L. & Liu, Y. C., 2005 Aug 1, In: IEEE Transactions on Power Systems. 20, 3, p. 1366-1372 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Rapid transit
  • Genetic algorithms
  • Scheduling
  43 Citations (Scopus)

• Optimization of an enzyme linked DNA aptamer assay for cardiac troponin i detection: Synchronous multiple sample analysis on an integrated microfluidic platform

  Gopinathan, P., Sinha, A., Chung, Y. D., Shiesh, S. C. & Lee, G. B., 2019 Aug 21, In: Analyst. 144, 16, p. 4943-4951 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Nucleotide Aptamers
  • Microfluidics
  • Troponin
  • Troponin I
  • Assays
  9 Citations (Scopus)

• Optimization of an electroporation system for gene transfection by taguchi method

  Lin, Y. C., Hung, C. Y., Huang, K. S., Fang, C. S. & Yang, C. H., 2005 Jan 1, Micro Total Analysis Systems - Proceedings of MicroTAS 2005 Conference: 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Transducer Research Foundation, p. 1425-1427 3 p. (Micro Total Analysis Systems - Proceedings of MicroTAS 2005 Conference: 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electroporation
  • Taguchi methods
  • Cells
  • Genes
  • Electrostatic force

• Optimization of an algae ball mill grinder using artificial neural network

  Fernando, A. H., Maglaya, A. B. & Ubando, A. T., 2017 Feb 8, Proceedings of the 2016 IEEE Region 10 Conference, TENCON 2016. Institute of Electrical and Electronics Engineers Inc., p. 3752-3756 5 p. 7848762. (IEEE Region 10 Annual International Conference, Proceedings/TENCON).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Algae
  • Ball mills
  • Grinding mills
  • MATLAB
  • Proteins

• Optimization of a multi-tube annular membrane methanol reformer for fuel cell-powered vehicles

  Wu, W., Yang, S. B., Chuang, B. N. & Shi, B., 2018 Jan 1, In: Energy Procedia. 152, p. 661-666 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Methanol
  • Fuel cells
  • Membranes
  • Preheating
  • Steam reforming
  1 Citation (Scopus)

• Optimization of a methane autothermal reforming-based hydrogen production system with low CO ₂ emissions

  Wu, W. & Tungpanututh, C., 2012 Oct 9, 8th International Symposium on Advanced Control of Chemical Processes, ADCHEM 2012. PART 1 ed. p. 661-666 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 8, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Reforming reactions
  • Hydrogen production
  • Methane
  • Carbon dioxide
  • Waste heat utilization
  3 Citations (Scopus)

• Optimization of a fuzzy controller using taguchi methods with multiple performance characteristics

  Chiang, C. H. & Chen, L. H., 2006, Proceedings of the 9th Joint Conference on Information Sciences, JCIS 2006. FTT-36. (Proceedings of the 9th Joint Conference on Information Sciences, JCIS 2006; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Taguchi methods
  • Poles
  • Controllers

• Optimization of a finite dipole array with genetic algorithm including mutual coupling effects

  Lee, K. C., 2000 Nov, In: International Journal of RF and Microwave Computer-Aided Engineering. 10, 6, p. 379-382 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Genetic algorithms
  • Networks (circuits)
  • Antenna arrays
  3 Citations (Scopus)

• Optimization of adiabaticity in coupled-waveguide devices using shortcuts to adiabaticity

  Ho, C. P. & Tseng, S. Y., 2015 Nov 1, In: Optics Letters. 40, 21, p. 4831-4834 4 p.

  Research output: Contribution to journal › Article › peer-review

  • waveguides
  • optimization
  • engineers
  • fabrication
  • propagation
  24 Citations (Scopus)

• Optimization of acridine orange loading on 1:1 layered clay minerals for fluorescence enhancement

  Jiang, W. T., Tsai, Y., Wang, X. & Li, Z., 2020 Oct 25, In: Journal of Industrial and Engineering Chemistry. 90, p. 407-418 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Clay minerals
  • Acridine Orange
  • Fluorescence
  • Kaolinite
  • Light absorption

• Optimization model in microalgae based biodiesel supply chain: A case study in the Philippines

  Manalac, A. J. & Ubando, A. T., 2016 Jan 25, IEEE Region 10 Humanitarian Technology Conference, R10-HTC 2015 - co-located with 8th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, HNICEM 2015. Institute of Electrical and Electronics Engineers Inc., 7391858. (IEEE Region 10 Humanitarian Technology Conference, R10-HTC 2015 - co-located with 8th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, HNICEM 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biodiesel
  • Supply chains
  • land transportation
  • Transportation routes
  • cost
  1 Citation (Scopus)

• Optimization Method of IR Thermography Facial Image Registration

  Jian, B. L., Chen, C. L., Lin, C. J. & Yau, H. T., 2019, In: IEEE Access. 7, p. 93501-93510 10 p., 8758960.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Image registration
  • Parallel processing systems
  • Simulated annealing
  • Image quality
  • Particle swarm optimization (PSO)
  3 Citations (Scopus)

• Optimization method for highway horizontal alignment design

  Lee, Y., Tsou, Y. R. & Liu, H. L., 2009 Mar 26, In: Journal of Transportation Engineering. 135, 4, p. 217-224 8 p.

  Research output: Contribution to journal › Article › peer-review

  • heuristics
  29 Citations (Scopus)

• Optimization in esterification of palmitic acid with excess methanol by solid acid catalyst

  Dang, T. H. & Chen, B. H., 2013 May, In: Fuel processing technology. 109, p. 7-12 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Palmitic acid
  • Esterification
  • Palmitic Acid
  • Methanol
  • Acids
  7 Citations (Scopus)

• Optimization for buckling resistance of fiber-composite laminate shells with and without cutouts

  Hu, H-T. & Wang, S. S., 1992 Jan 1, In: Composite Structures. 22, 1, p. 3-13 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Laminates
  • Buckling
  • Fibers
  • Fiber reinforced materials
  • Composite materials
  17 Citations (Scopus)

• Optimization for buckling resistance of fiber-composite laminate shells with and without cutouts

  Hu, H. T. & Wang, S. S., 1990 Jan 1, In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. pt 2, p. 1300-1312 13 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Laminates
  • Buckling
  • Fibers
  • Composite materials
  • Fiber reinforced materials
  6 Citations (Scopus)

• Optimization for buckling of composite sandwich plates

  Moh, J. S. & Hwu, C., 1997 May, In: AIAA journal. 35, 5, p. 863-868 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Buckling
  • Composite materials
  • Laminated composites
  • Laminates
  • Boundary conditions
  30 Citations (Scopus)

• Optimization design of a DC commutator motor with an integrated planetary gear train

  Wu, Y. C., Chen, G. C. & Yan, H. S., 2011 Oct 1, In: IEEE Transactions on Magnetics. 47, 10, p. 4461-4464 4 p., 6028242.

  Research output: Contribution to journal › Article › peer-review

  • Electric commutators
  • Gears
  • Torque
  • Gear teeth
  • Rotors
  2 Citations (Scopus)

• Optimization and neural network in new product development

  Lin, C., Madu, C. N., Kuei, C. H. & Yeh, J. M., 1995 Jan 1, In: International Transactions in Operational Research. 2, 4, p. 321-329 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Analytic hierarchy process
  • Product development
  • Analytic Hierarchy Process
  • Neural Networks
  • Linear Programming
  1 Citation (Scopus)