Skip to main navigation Skip to search Skip to main content

Accurate non-destructive evaluation of pavement stiffness profile based on Monte Carlo inversion of surface-wave dispersion spectra

  • Tsai Jung Wu
  • , Chih Ping Lin
  • , Yin Ming Po
  • , Quoc Kinh Tran
  • , Ernian Pan
  • , Shih Hsien Yang

Research output: Contribution to journal › Article › peer-review

Abstract

Surface wave methods provide significant advantages for non-destructive pavement evaluation, particularly in estimating layer thickness and stiffness. Inversion based on fitting the full surface-wave dispersion spectrum leverages complete phase information, accounts for survey configuration, and eliminates the need for mode identification and dispersion curve picking. This study proposes a dispersion-spectrum inversion scheme for shear-wave velocity (VS) profiling, integrating an efficient full-wavefield forward model of layered media with the Markov chain Monte Carlo (McMC) simulations. Both layer thickness and VS are treated as inversion variables to enable accurate stratification. The non-linearity of the problem is addressed using a global search via McMC, which also quantifies uncertainty in the inversion results. Synthetic tests show that McMC dispersion-spectrum inversion reduces uncertainty in VS estimates by 10–75 % compared to effective-mode inversion. Incorporating higher-frequency content further decreases inversion uncertainty for both shallow and deep layers. For instance, expanding the frequency range from 2 kHz to 5 kHz results in a reduction of estimation uncertainty by more than 60 % for layer thicknesses and over 30 % for VS. A field experiment was conducted to validate the robustness of the proposed dispersion-spectrum inversion approach under practical conditions.

Original languageEnglish
Article number103496
JournalNDT and E International
Volume156
DOIs
Publication statusPublished - 2025 Dec

All Science Journal Classification (ASJC) codes

  • General Materials Science
  • Condensed Matter Physics
  • Mechanical Engineering

Cite this