Analysis of the friction and wear mechanism of structural ceramic coatings part 2: The effect of operating conditions and substrate material

Jen Fin Lin; Ming Huang Liu; Jen Dow Wu

doi:10.1016/0043-1648(96)06565-9

Analysis of the friction and wear mechanism of structural ceramic coatings part 2: The effect of operating conditions and substrate material

Jen Fin Lin, Ming Huang Liu, Jen Dow Wu

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

19 Citations (Scopus)

Abstract

Both the structural changes and frictional properties of CrN films, on two different substrate materials, were investigated as a function of both the effects of operating conditions and the effects of oxidization. The tribological behaviour reflecting these two kinds of effects is expressed by the tribological parameters of wear loss, the friction coefficient and the wear mechanism. The formation of oxide films affecting wear loss under various operating conditions was also examined. The wear losses, of chromium nitride and titanium nitride films, were compared at different specimen temperatures.

Original language	English
Pages (from-to)	7-14
Number of pages	8
Journal	Wear
Volume	198
Issue number	1-2
DOIs	https://doi.org/10.1016/0043-1648(96)06565-9
Publication status	Published - 1996 Oct

All Science Journal Classification (ASJC) codes

Condensed Matter Physics
Mechanics of Materials
Surfaces and Interfaces
Surfaces, Coatings and Films
Materials Chemistry

Access to Document

10.1016/0043-1648(96)06565-9

Cite this

@article{ecf26e1b61334e7b89e63050b281161c,

title = "Analysis of the friction and wear mechanism of structural ceramic coatings part 2: The effect of operating conditions and substrate material",

abstract = "Both the structural changes and frictional properties of CrN films, on two different substrate materials, were investigated as a function of both the effects of operating conditions and the effects of oxidization. The tribological behaviour reflecting these two kinds of effects is expressed by the tribological parameters of wear loss, the friction coefficient and the wear mechanism. The formation of oxide films affecting wear loss under various operating conditions was also examined. The wear losses, of chromium nitride and titanium nitride films, were compared at different specimen temperatures.",

author = "Lin, {Jen Fin} and Liu, {Ming Huang} and Wu, {Jen Dow}",

year = "1996",

month = oct,

doi = "10.1016/0043-1648(96)06565-9",

language = "English",

volume = "198",

pages = "7--14",

journal = "Wear",

issn = "0043-1648",

publisher = "Elsevier BV",

number = "1-2",

}

TY - JOUR

T1 - Analysis of the friction and wear mechanism of structural ceramic coatings part 2

T2 - The effect of operating conditions and substrate material

AU - Lin, Jen Fin

AU - Liu, Ming Huang

AU - Wu, Jen Dow

PY - 1996/10

Y1 - 1996/10

N2 - Both the structural changes and frictional properties of CrN films, on two different substrate materials, were investigated as a function of both the effects of operating conditions and the effects of oxidization. The tribological behaviour reflecting these two kinds of effects is expressed by the tribological parameters of wear loss, the friction coefficient and the wear mechanism. The formation of oxide films affecting wear loss under various operating conditions was also examined. The wear losses, of chromium nitride and titanium nitride films, were compared at different specimen temperatures.

AB - Both the structural changes and frictional properties of CrN films, on two different substrate materials, were investigated as a function of both the effects of operating conditions and the effects of oxidization. The tribological behaviour reflecting these two kinds of effects is expressed by the tribological parameters of wear loss, the friction coefficient and the wear mechanism. The formation of oxide films affecting wear loss under various operating conditions was also examined. The wear losses, of chromium nitride and titanium nitride films, were compared at different specimen temperatures.

UR - http://www.scopus.com/inward/record.url?scp=0013608898&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0013608898&partnerID=8YFLogxK

U2 - 10.1016/0043-1648(96)06565-9

DO - 10.1016/0043-1648(96)06565-9

M3 - Article

AN - SCOPUS:0013608898

SN - 0043-1648

VL - 198

SP - 7

EP - 14

JO - Wear

JF - Wear

IS - 1-2

ER -

Analysis of the friction and wear mechanism of structural ceramic coatings part 2: The effect of operating conditions and substrate material

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this