CAD procedures for planar re-entrant type couplers and three-line baluns

Chih-Ming Tsai, K. C. Gupta

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Abstract

A generalized network model for coupled multiconductor transmission lines is derived based on normal mode parameters. The model is used in the design of planar re-entrant type couplers. By using this network model, the design of a planar re-entrant coupler can be derived from the design of a traditional two-line coupler. The design procedure for single-layer planar baluns using three-conductor transmission lines has also been developed based on this network model. Design procedures and examples are included.

Original languageEnglish
Title of host publicationDigest IEEE MTT-S International Symposium Digest
PublisherPubl by IEEE
Pages1013-1016
Number of pages4
Volume2
ISBN (Print)0780312090
Publication statusPublished - 1993
EventProceedings of the 1993 IEEE MTT-S International Symposium on Circuits and Systems, Part 4 (of 4) - Atlanta, GA, USA
Duration: 1993 Jun 141993 Jun 18

Other

OtherProceedings of the 1993 IEEE MTT-S International Symposium on Circuits and Systems, Part 4 (of 4)
CityAtlanta, GA, USA
Period93-06-1493-06-18

Fingerprint

computer aided design
couplers
Computer aided design
transmission lines
Electric lines
conductors

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Tsai, C-M., & Gupta, K. C. (1993). CAD procedures for planar re-entrant type couplers and three-line baluns. In Digest IEEE MTT-S International Symposium Digest (Vol. 2, pp. 1013-1016). Publ by IEEE.
Tsai, Chih-Ming ; Gupta, K. C. / CAD procedures for planar re-entrant type couplers and three-line baluns. Digest IEEE MTT-S International Symposium Digest. Vol. 2 Publ by IEEE, 1993. pp. 1013-1016
@inproceedings{b765fa055a0f4ae0ac7634c9fae9f5c7,
title = "CAD procedures for planar re-entrant type couplers and three-line baluns",
abstract = "A generalized network model for coupled multiconductor transmission lines is derived based on normal mode parameters. The model is used in the design of planar re-entrant type couplers. By using this network model, the design of a planar re-entrant coupler can be derived from the design of a traditional two-line coupler. The design procedure for single-layer planar baluns using three-conductor transmission lines has also been developed based on this network model. Design procedures and examples are included.",
author = "Chih-Ming Tsai and Gupta, {K. C.}",
year = "1993",
language = "English",
isbn = "0780312090",
volume = "2",
pages = "1013--1016",
booktitle = "Digest IEEE MTT-S International Symposium Digest",
publisher = "Publ by IEEE",

}

Tsai, C-M & Gupta, KC 1993, CAD procedures for planar re-entrant type couplers and three-line baluns. in Digest IEEE MTT-S International Symposium Digest. vol. 2, Publ by IEEE, pp. 1013-1016, Proceedings of the 1993 IEEE MTT-S International Symposium on Circuits and Systems, Part 4 (of 4), Atlanta, GA, USA, 93-06-14.

CAD procedures for planar re-entrant type couplers and three-line baluns. / Tsai, Chih-Ming; Gupta, K. C.

Digest IEEE MTT-S International Symposium Digest. Vol. 2 Publ by IEEE, 1993. p. 1013-1016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - CAD procedures for planar re-entrant type couplers and three-line baluns

AU - Tsai, Chih-Ming

AU - Gupta, K. C.

PY - 1993

Y1 - 1993

N2 - A generalized network model for coupled multiconductor transmission lines is derived based on normal mode parameters. The model is used in the design of planar re-entrant type couplers. By using this network model, the design of a planar re-entrant coupler can be derived from the design of a traditional two-line coupler. The design procedure for single-layer planar baluns using three-conductor transmission lines has also been developed based on this network model. Design procedures and examples are included.

AB - A generalized network model for coupled multiconductor transmission lines is derived based on normal mode parameters. The model is used in the design of planar re-entrant type couplers. By using this network model, the design of a planar re-entrant coupler can be derived from the design of a traditional two-line coupler. The design procedure for single-layer planar baluns using three-conductor transmission lines has also been developed based on this network model. Design procedures and examples are included.

UR - http://www.scopus.com/inward/record.url?scp=0027150685&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027150685&partnerID=8YFLogxK

M3 - Conference contribution

SN - 0780312090

VL - 2

SP - 1013

EP - 1016

BT - Digest IEEE MTT-S International Symposium Digest

PB - Publ by IEEE

ER -

Tsai C-M, Gupta KC. CAD procedures for planar re-entrant type couplers and three-line baluns. In Digest IEEE MTT-S International Symposium Digest. Vol. 2. Publ by IEEE. 1993. p. 1013-1016