Design and fabrication development of a micro flow heated channel with measurements of the inside micro-scale flow and heat transfer process

C. W. Liu, Chie Gau, B. T. Dai

Research output: Contribution to journalArticlepeer-review

19 Citations (Scopus)

Abstract

The current work provides a design and fabrication technique for a micro channel system that can provide a uniform heat flux boundary condition on the channel wall and a well insulation on the wall to prevent heat loss from the channel to the outside ambient. Therefore, detailed micro-scale flow and heat transfer process and information along the channel can be studied. Semiconductor sensor material was selected to fabricate both the heaters and the arrays of temperature sensors on a silicon substrate. These heaters and sensors were then moved to a low thermal conductivity epoxy-glass substrate for fabrication of the channel. Design consideration and fabrication techniques involved in this processes will be discussed. A final measurement for the validation of the heaters and the sensors fabricated and a study of the flow friction behavior and the heat transfer coefficient distributions inside the micro channel will be presented. The local Nusselt number distrubution inside the micro channel is reported the first time in the open literature.

Original languageEnglish
Pages (from-to)91-101
Number of pages11
JournalBiosensors and Bioelectronics
Volume20
Issue number1
DOIs
Publication statusPublished - 2004 Jul 30

All Science Journal Classification (ASJC) codes

  • Biotechnology
  • Biophysics
  • Biomedical Engineering
  • Electrochemistry

Fingerprint Dive into the research topics of 'Design and fabrication development of a micro flow heated channel with measurements of the inside micro-scale flow and heat transfer process'. Together they form a unique fingerprint.

Cite this