Design and implementation of FPGA-based single stage photovoltaic energy conversion system

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Abstract

In this paper, a Control Chip implemented with FPGA (Field Programmable Gate Array) for Single Stage Photovoltaic (PV) Energy Conversion System is presented. Such system converts DC power generated from photovoltaic cells into AC power. FPGA chip is used for the MPPT (Maximum Power Point Tracking) operation of photovoltaic array, and then controls the Full-Bridge inverter to converter DC power into AC power. The system can be operated either stand-alone mode or grid-connect mode. Digital technology realizations may improve the former analog circuit restriction, greatly enhances the system performance. Therefore, Spartan-II-XC2S200 FPGA chip is employed for controller design. VHDL (VHSIC Hardware Description Language) is employed as the RTL code. Finally, experimental results demonstrate the excellent performance of the proposed technique.

Original languageEnglish
Pages745-748
Number of pages4
Publication statusPublished - 2004 Dec 1
Event2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology - Tainan, Taiwan
Duration: 2004 Dec 62004 Dec 9

Other

Other2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology
CountryTaiwan
CityTainan
Period04-12-0604-12-09

Fingerprint

Energy conversion
Field programmable gate arrays (FPGA)
Rectifying circuits
Computer hardware description languages
Photovoltaic cells
Analog circuits
Controllers

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Lin, F. S., Chen, J-F., Liang, T-J., Lin, R-L., & Kuo, Y. C. (2004). Design and implementation of FPGA-based single stage photovoltaic energy conversion system. 745-748. Paper presented at 2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology, Tainan, Taiwan.
Lin, F. S. ; Chen, Jiann-Fuh ; Liang, Tsorng-Juu ; Lin, Ray-Lee ; Kuo, Y. C. / Design and implementation of FPGA-based single stage photovoltaic energy conversion system. Paper presented at 2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology, Tainan, Taiwan.4 p.
@conference{2c10da8590bb460699a89944b556b009,
title = "Design and implementation of FPGA-based single stage photovoltaic energy conversion system",
abstract = "In this paper, a Control Chip implemented with FPGA (Field Programmable Gate Array) for Single Stage Photovoltaic (PV) Energy Conversion System is presented. Such system converts DC power generated from photovoltaic cells into AC power. FPGA chip is used for the MPPT (Maximum Power Point Tracking) operation of photovoltaic array, and then controls the Full-Bridge inverter to converter DC power into AC power. The system can be operated either stand-alone mode or grid-connect mode. Digital technology realizations may improve the former analog circuit restriction, greatly enhances the system performance. Therefore, Spartan-II-XC2S200 FPGA chip is employed for controller design. VHDL (VHSIC Hardware Description Language) is employed as the RTL code. Finally, experimental results demonstrate the excellent performance of the proposed technique.",
author = "Lin, {F. S.} and Jiann-Fuh Chen and Tsorng-Juu Liang and Ray-Lee Lin and Kuo, {Y. C.}",
year = "2004",
month = "12",
day = "1",
language = "English",
pages = "745--748",
note = "2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology ; Conference date: 06-12-2004 Through 09-12-2004",

}

Lin, FS, Chen, J-F, Liang, T-J, Lin, R-L & Kuo, YC 2004, 'Design and implementation of FPGA-based single stage photovoltaic energy conversion system', Paper presented at 2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology, Tainan, Taiwan, 04-12-06 - 04-12-09 pp. 745-748.

Design and implementation of FPGA-based single stage photovoltaic energy conversion system. / Lin, F. S.; Chen, Jiann-Fuh; Liang, Tsorng-Juu; Lin, Ray-Lee; Kuo, Y. C.

2004. 745-748 Paper presented at 2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology, Tainan, Taiwan.

Research output: Contribution to conferencePaper

TY - CONF

T1 - Design and implementation of FPGA-based single stage photovoltaic energy conversion system

AU - Lin, F. S.

AU - Chen, Jiann-Fuh

AU - Liang, Tsorng-Juu

AU - Lin, Ray-Lee

AU - Kuo, Y. C.

PY - 2004/12/1

Y1 - 2004/12/1

N2 - In this paper, a Control Chip implemented with FPGA (Field Programmable Gate Array) for Single Stage Photovoltaic (PV) Energy Conversion System is presented. Such system converts DC power generated from photovoltaic cells into AC power. FPGA chip is used for the MPPT (Maximum Power Point Tracking) operation of photovoltaic array, and then controls the Full-Bridge inverter to converter DC power into AC power. The system can be operated either stand-alone mode or grid-connect mode. Digital technology realizations may improve the former analog circuit restriction, greatly enhances the system performance. Therefore, Spartan-II-XC2S200 FPGA chip is employed for controller design. VHDL (VHSIC Hardware Description Language) is employed as the RTL code. Finally, experimental results demonstrate the excellent performance of the proposed technique.

AB - In this paper, a Control Chip implemented with FPGA (Field Programmable Gate Array) for Single Stage Photovoltaic (PV) Energy Conversion System is presented. Such system converts DC power generated from photovoltaic cells into AC power. FPGA chip is used for the MPPT (Maximum Power Point Tracking) operation of photovoltaic array, and then controls the Full-Bridge inverter to converter DC power into AC power. The system can be operated either stand-alone mode or grid-connect mode. Digital technology realizations may improve the former analog circuit restriction, greatly enhances the system performance. Therefore, Spartan-II-XC2S200 FPGA chip is employed for controller design. VHDL (VHSIC Hardware Description Language) is employed as the RTL code. Finally, experimental results demonstrate the excellent performance of the proposed technique.

UR - http://www.scopus.com/inward/record.url?scp=13444304202&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=13444304202&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:13444304202

SP - 745

EP - 748

ER -

Lin FS, Chen J-F, Liang T-J, Lin R-L, Kuo YC. Design and implementation of FPGA-based single stage photovoltaic energy conversion system. 2004. Paper presented at 2004 IEEE Asia-Pacific Conference on Circuits and Systems, APCCAS 2004: SoC Design for Ubiquitous Information Technology, Tainan, Taiwan.