Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp

Ray-Lee Lin; Chih Lo

doi:10.1109/IECON.2010.5675147

Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp

Ray-Lee Lin, Chih Lo

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This paper presents a novel single-stage charge-pump (CP) power-factor-correction (PFC) electronic ballast for the MH lamps driven with the low-frequency square-wave current to avoid the acoustic-resonance problem. In order to achieve high power factor and meet the IEC regulation, the CPPFC technique is applied to the full-bridge inverter of the conventional electronic ballast. Based on the analyses of the operational modes for the proposed electronic ballast, the design criteria of the CP components for the proposed electronic ballast are presented. A prototype circuit for 35-W MH lamp is implemented to confirm the presented design criteria.

Original language	English
Title of host publication	Proceedings - IECON 2010, 36th Annual Conference of the IEEE Industrial Electronics Society
Pages	2553-2558
Number of pages	6
DOIs	https://doi.org/10.1109/IECON.2010.5675147
Publication status	Published - 2010 Dec 1
Event	36th Annual Conference of the IEEE Industrial Electronics Society, IECON 2010 - Glendale, AZ, United States Duration: 2010 Nov 7 → 2010 Nov 10

Publication series

Name	IECON Proceedings (Industrial Electronics Conference)

Other

Other	36th Annual Conference of the IEEE Industrial Electronics Society, IECON 2010
Country/Territory	United States
City	Glendale, AZ
Period	10-11-07 → 10-11-10

All Science Journal Classification (ASJC) codes

Control and Systems Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/IECON.2010.5675147

Cite this

Lin, R.-L., & Lo, C. (2010). Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp. In Proceedings - IECON 2010, 36th Annual Conference of the IEEE Industrial Electronics Society (pp. 2553-2558). Article 5675147 (IECON Proceedings (Industrial Electronics Conference)). https://doi.org/10.1109/IECON.2010.5675147

@inproceedings{9d1cf2ba228545ae97998819210f6dd9,

title = "Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp",

abstract = "This paper presents a novel single-stage charge-pump (CP) power-factor-correction (PFC) electronic ballast for the MH lamps driven with the low-frequency square-wave current to avoid the acoustic-resonance problem. In order to achieve high power factor and meet the IEC regulation, the CPPFC technique is applied to the full-bridge inverter of the conventional electronic ballast. Based on the analyses of the operational modes for the proposed electronic ballast, the design criteria of the CP components for the proposed electronic ballast are presented. A prototype circuit for 35-W MH lamp is implemented to confirm the presented design criteria.",

author = "Ray-Lee Lin and Chih Lo",

year = "2010",

month = dec,

day = "1",

doi = "10.1109/IECON.2010.5675147",

language = "English",

isbn = "9781424452262",

series = "IECON Proceedings (Industrial Electronics Conference)",

pages = "2553--2558",

booktitle = "Proceedings - IECON 2010, 36th Annual Conference of the IEEE Industrial Electronics Society",

note = "36th Annual Conference of the IEEE Industrial Electronics Society, IECON 2010 ; Conference date: 07-11-2010 Through 10-11-2010",

}

Lin, R-L & Lo, C 2010, Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp. in Proceedings - IECON 2010, 36th Annual Conference of the IEEE Industrial Electronics Society., 5675147, IECON Proceedings (Industrial Electronics Conference), pp. 2553-2558, 36th Annual Conference of the IEEE Industrial Electronics Society, IECON 2010, Glendale, AZ, United States, 10-11-07. https://doi.org/10.1109/IECON.2010.5675147

Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp. / Lin, Ray-Lee; Lo, Chih.
Proceedings - IECON 2010, 36th Annual Conference of the IEEE Industrial Electronics Society. 2010. p. 2553-2558 5675147 (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp

AU - Lin, Ray-Lee

AU - Lo, Chih

PY - 2010/12/1

Y1 - 2010/12/1

N2 - This paper presents a novel single-stage charge-pump (CP) power-factor-correction (PFC) electronic ballast for the MH lamps driven with the low-frequency square-wave current to avoid the acoustic-resonance problem. In order to achieve high power factor and meet the IEC regulation, the CPPFC technique is applied to the full-bridge inverter of the conventional electronic ballast. Based on the analyses of the operational modes for the proposed electronic ballast, the design criteria of the CP components for the proposed electronic ballast are presented. A prototype circuit for 35-W MH lamp is implemented to confirm the presented design criteria.

AB - This paper presents a novel single-stage charge-pump (CP) power-factor-correction (PFC) electronic ballast for the MH lamps driven with the low-frequency square-wave current to avoid the acoustic-resonance problem. In order to achieve high power factor and meet the IEC regulation, the CPPFC technique is applied to the full-bridge inverter of the conventional electronic ballast. Based on the analyses of the operational modes for the proposed electronic ballast, the design criteria of the CP components for the proposed electronic ballast are presented. A prototype circuit for 35-W MH lamp is implemented to confirm the presented design criteria.

UR - http://www.scopus.com/inward/record.url?scp=78751523932&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78751523932&partnerID=8YFLogxK

U2 - 10.1109/IECON.2010.5675147

DO - 10.1109/IECON.2010.5675147

M3 - Conference contribution

AN - SCOPUS:78751523932

SN - 9781424452262

T3 - IECON Proceedings (Industrial Electronics Conference)

SP - 2553

EP - 2558

BT - Proceedings - IECON 2010, 36th Annual Conference of the IEEE Industrial Electronics Society

T2 - 36th Annual Conference of the IEEE Industrial Electronics Society, IECON 2010

Y2 - 7 November 2010 through 10 November 2010

ER -

Design and implementation of novel single-stage charge-pump power factor correction electronic ballast for metal halide lamp

Abstract

Publication series

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this