Design of wireless power transfer for dynamic power transmission with position-detection mechanism

Tsong Shing Lee, Shyh-Jier Huang, Cheng-Chi Tai, Ruei Yuan Chen, Bei Ren Jiang

Research output: Contribution to conferencePaper

Abstract

This paper presents a wireless power transfer design with pick-up device position detection for dynamic power transmission. Since the fixed-point inductive charging is short of providing the power to the moving equipment, the paper is hence motivated to sense the pick-up device, by which the power and flux can be better regulated, meanwhile benefiting the efficiency and maintaining the voltage profile. As for the control strategy made in this study, the voltage of transmission coil is served as the feedback signal, with which the dynamic protection is reached while the modular platform organized by inductive coils are well accomplished. To validate the effectiveness of this method, the prototype is tested to dynamically deliver the power at 5 cm gap. Test results indicate that the power of each transmission coil can be effectively adjusted, where an 82.55% efficiency of the system can be expected. This method owns a high potential of extending to industrial applications when the dynamic power delivery is considered.

Original languageEnglish
Pages976-981
Number of pages6
DOIs
Publication statusPublished - 2015 Jun 16
Event2015 IEEE International Conference on Industrial Technology, ICIT 2015 - Seville, Spain
Duration: 2015 Mar 172015 Mar 19

Other

Other2015 IEEE International Conference on Industrial Technology, ICIT 2015
CountrySpain
CitySeville
Period15-03-1715-03-19

Fingerprint

Power transmission
Electric potential
Industrial applications
Fluxes
Feedback

All Science Journal Classification (ASJC) codes

  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

Lee, T. S., Huang, S-J., Tai, C-C., Chen, R. Y., & Jiang, B. R. (2015). Design of wireless power transfer for dynamic power transmission with position-detection mechanism. 976-981. Paper presented at 2015 IEEE International Conference on Industrial Technology, ICIT 2015, Seville, Spain. https://doi.org/10.1109/ICIT.2015.7125224
Lee, Tsong Shing ; Huang, Shyh-Jier ; Tai, Cheng-Chi ; Chen, Ruei Yuan ; Jiang, Bei Ren. / Design of wireless power transfer for dynamic power transmission with position-detection mechanism. Paper presented at 2015 IEEE International Conference on Industrial Technology, ICIT 2015, Seville, Spain.6 p.
@conference{4213326e23d44c238b246e4674a0e39a,
title = "Design of wireless power transfer for dynamic power transmission with position-detection mechanism",
abstract = "This paper presents a wireless power transfer design with pick-up device position detection for dynamic power transmission. Since the fixed-point inductive charging is short of providing the power to the moving equipment, the paper is hence motivated to sense the pick-up device, by which the power and flux can be better regulated, meanwhile benefiting the efficiency and maintaining the voltage profile. As for the control strategy made in this study, the voltage of transmission coil is served as the feedback signal, with which the dynamic protection is reached while the modular platform organized by inductive coils are well accomplished. To validate the effectiveness of this method, the prototype is tested to dynamically deliver the power at 5 cm gap. Test results indicate that the power of each transmission coil can be effectively adjusted, where an 82.55{\%} efficiency of the system can be expected. This method owns a high potential of extending to industrial applications when the dynamic power delivery is considered.",
author = "Lee, {Tsong Shing} and Shyh-Jier Huang and Cheng-Chi Tai and Chen, {Ruei Yuan} and Jiang, {Bei Ren}",
year = "2015",
month = "6",
day = "16",
doi = "10.1109/ICIT.2015.7125224",
language = "English",
pages = "976--981",
note = "2015 IEEE International Conference on Industrial Technology, ICIT 2015 ; Conference date: 17-03-2015 Through 19-03-2015",

}

Lee, TS, Huang, S-J, Tai, C-C, Chen, RY & Jiang, BR 2015, 'Design of wireless power transfer for dynamic power transmission with position-detection mechanism' Paper presented at 2015 IEEE International Conference on Industrial Technology, ICIT 2015, Seville, Spain, 15-03-17 - 15-03-19, pp. 976-981. https://doi.org/10.1109/ICIT.2015.7125224

Design of wireless power transfer for dynamic power transmission with position-detection mechanism. / Lee, Tsong Shing; Huang, Shyh-Jier; Tai, Cheng-Chi; Chen, Ruei Yuan; Jiang, Bei Ren.

2015. 976-981 Paper presented at 2015 IEEE International Conference on Industrial Technology, ICIT 2015, Seville, Spain.

Research output: Contribution to conferencePaper

TY - CONF

T1 - Design of wireless power transfer for dynamic power transmission with position-detection mechanism

AU - Lee, Tsong Shing

AU - Huang, Shyh-Jier

AU - Tai, Cheng-Chi

AU - Chen, Ruei Yuan

AU - Jiang, Bei Ren

PY - 2015/6/16

Y1 - 2015/6/16

N2 - This paper presents a wireless power transfer design with pick-up device position detection for dynamic power transmission. Since the fixed-point inductive charging is short of providing the power to the moving equipment, the paper is hence motivated to sense the pick-up device, by which the power and flux can be better regulated, meanwhile benefiting the efficiency and maintaining the voltage profile. As for the control strategy made in this study, the voltage of transmission coil is served as the feedback signal, with which the dynamic protection is reached while the modular platform organized by inductive coils are well accomplished. To validate the effectiveness of this method, the prototype is tested to dynamically deliver the power at 5 cm gap. Test results indicate that the power of each transmission coil can be effectively adjusted, where an 82.55% efficiency of the system can be expected. This method owns a high potential of extending to industrial applications when the dynamic power delivery is considered.

AB - This paper presents a wireless power transfer design with pick-up device position detection for dynamic power transmission. Since the fixed-point inductive charging is short of providing the power to the moving equipment, the paper is hence motivated to sense the pick-up device, by which the power and flux can be better regulated, meanwhile benefiting the efficiency and maintaining the voltage profile. As for the control strategy made in this study, the voltage of transmission coil is served as the feedback signal, with which the dynamic protection is reached while the modular platform organized by inductive coils are well accomplished. To validate the effectiveness of this method, the prototype is tested to dynamically deliver the power at 5 cm gap. Test results indicate that the power of each transmission coil can be effectively adjusted, where an 82.55% efficiency of the system can be expected. This method owns a high potential of extending to industrial applications when the dynamic power delivery is considered.

UR - http://www.scopus.com/inward/record.url?scp=84937682801&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937682801&partnerID=8YFLogxK

U2 - 10.1109/ICIT.2015.7125224

DO - 10.1109/ICIT.2015.7125224

M3 - Paper

AN - SCOPUS:84937682801

SP - 976

EP - 981

ER -

Lee TS, Huang S-J, Tai C-C, Chen RY, Jiang BR. Design of wireless power transfer for dynamic power transmission with position-detection mechanism. 2015. Paper presented at 2015 IEEE International Conference on Industrial Technology, ICIT 2015, Seville, Spain. https://doi.org/10.1109/ICIT.2015.7125224