Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading

Sergei Alexandrov, Elena Lyamina, Yeau-Ren Jeng

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A thin elastic-plastic annular disk subject to thermomechanical loading is considered. It is assumed that plastic yielding is controlled by Hill's quadratic orthotropic yield criterion. A distinguished feature of the boundary value problem considered is that there are two loading parameters. One of these parameters is temperature and the other is pressure over the inner radius of the disk. It is shown that the initiation of plastic yielding may occur either at the inner radius or at the outer radius of the disk depending on the value of anisotropy parameters.

Original languageEnglish
Title of host publicationIntelligent Technologies and Engineering Systems
Pages727-734
Number of pages8
DOIs
Publication statusPublished - 2013 Aug 8
Event2012 1st International Conference on Intelligent Technologies and Engineering Systems, ICITES 2012 - Changhua, Taiwan
Duration: 2012 Dec 132012 Dec 15

Publication series

NameLecture Notes in Electrical Engineering
Volume234 LNEE
ISSN (Print)1876-1100
ISSN (Electronic)1876-1119

Other

Other2012 1st International Conference on Intelligent Technologies and Engineering Systems, ICITES 2012
CountryTaiwan
CityChanghua
Period12-12-1312-12-15

Fingerprint

Anisotropy
Plastics
Boundary value problems
Temperature

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

Cite this

Alexandrov, S., Lyamina, E., & Jeng, Y-R. (2013). Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading. In Intelligent Technologies and Engineering Systems (pp. 727-734). (Lecture Notes in Electrical Engineering; Vol. 234 LNEE). https://doi.org/10.1007/978-1-4614-6747-2_84
Alexandrov, Sergei ; Lyamina, Elena ; Jeng, Yeau-Ren. / Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading. Intelligent Technologies and Engineering Systems. 2013. pp. 727-734 (Lecture Notes in Electrical Engineering).
@inproceedings{cf7ff175519647a3bc65c4f4db023fff,
title = "Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading",
abstract = "A thin elastic-plastic annular disk subject to thermomechanical loading is considered. It is assumed that plastic yielding is controlled by Hill's quadratic orthotropic yield criterion. A distinguished feature of the boundary value problem considered is that there are two loading parameters. One of these parameters is temperature and the other is pressure over the inner radius of the disk. It is shown that the initiation of plastic yielding may occur either at the inner radius or at the outer radius of the disk depending on the value of anisotropy parameters.",
author = "Sergei Alexandrov and Elena Lyamina and Yeau-Ren Jeng",
year = "2013",
month = "8",
day = "8",
doi = "10.1007/978-1-4614-6747-2_84",
language = "English",
isbn = "9781461467465",
series = "Lecture Notes in Electrical Engineering",
pages = "727--734",
booktitle = "Intelligent Technologies and Engineering Systems",

}

Alexandrov, S, Lyamina, E & Jeng, Y-R 2013, Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading. in Intelligent Technologies and Engineering Systems. Lecture Notes in Electrical Engineering, vol. 234 LNEE, pp. 727-734, 2012 1st International Conference on Intelligent Technologies and Engineering Systems, ICITES 2012, Changhua, Taiwan, 12-12-13. https://doi.org/10.1007/978-1-4614-6747-2_84

Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading. / Alexandrov, Sergei; Lyamina, Elena; Jeng, Yeau-Ren.

Intelligent Technologies and Engineering Systems. 2013. p. 727-734 (Lecture Notes in Electrical Engineering; Vol. 234 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading

AU - Alexandrov, Sergei

AU - Lyamina, Elena

AU - Jeng, Yeau-Ren

PY - 2013/8/8

Y1 - 2013/8/8

N2 - A thin elastic-plastic annular disk subject to thermomechanical loading is considered. It is assumed that plastic yielding is controlled by Hill's quadratic orthotropic yield criterion. A distinguished feature of the boundary value problem considered is that there are two loading parameters. One of these parameters is temperature and the other is pressure over the inner radius of the disk. It is shown that the initiation of plastic yielding may occur either at the inner radius or at the outer radius of the disk depending on the value of anisotropy parameters.

AB - A thin elastic-plastic annular disk subject to thermomechanical loading is considered. It is assumed that plastic yielding is controlled by Hill's quadratic orthotropic yield criterion. A distinguished feature of the boundary value problem considered is that there are two loading parameters. One of these parameters is temperature and the other is pressure over the inner radius of the disk. It is shown that the initiation of plastic yielding may occur either at the inner radius or at the outer radius of the disk depending on the value of anisotropy parameters.

UR - http://www.scopus.com/inward/record.url?scp=84881047673&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84881047673&partnerID=8YFLogxK

U2 - 10.1007/978-1-4614-6747-2_84

DO - 10.1007/978-1-4614-6747-2_84

M3 - Conference contribution

SN - 9781461467465

T3 - Lecture Notes in Electrical Engineering

SP - 727

EP - 734

BT - Intelligent Technologies and Engineering Systems

ER -

Alexandrov S, Lyamina E, Jeng Y-R. Effect of anisotropy parameters on the initiation of plastic yielding in thin hollow disks subject to thermomechanical loading. In Intelligent Technologies and Engineering Systems. 2013. p. 727-734. (Lecture Notes in Electrical Engineering). https://doi.org/10.1007/978-1-4614-6747-2_84