Skip to main navigation Skip to search Skip to main content

Effects of dry and wet torrefaction pretreatment on microalgae pyrolysis analyzed by TG-FTIR and double-shot Py-GC/MS

  • Yong Yang Gan
  • , Wei Hsin Chen
  • , Hwai Chyuan Ong
  • , Herng Kuang Sheen
  • , Jo Shu Chang
  • , Tzu Hsien Hsieh
  • , Tau Chuan Ling

Research output: Contribution to journalArticlepeer-review

Abstract

TG-FTIR and double-shot Py-GC/MS were executed to investigate the effects of torrefaction pretreatment on microalga (Chlorella vulgaris ESP-31) pyrolysis. TG-FTIR was performed to analyze the pyrolysis and combustion gas of raw and wet torrefied microalgae, whereas double-shot Py-GC/MS was applied to investigate the product distributions of single and two-stage thermal degradation of the microalgae. From the result, wet torrefaction successfully eliminated the release of CO in the pyrolysis gas. The highest generation of C–H during pyrolysis was achieved by the microalgae pretreated with dilute sulfuric acid. In the combustion gas, the intensity of O–H absorption band was removed in the first stage after wet torrefaction. The Py-GC/MS analysis revealed that the fatty acids (48.22%) were the dominant component in the bio-oil derived from the microalgae pretreated by the dilute sulfuric acid in wet torrefaction. Meanwhile, the productivity of carbohydrate-derived products (anhydrous sugars) decreased from 18.58 to 0.39% in the pyrolytic bio-oil after the wet torrefaction pretreatment. In contrast, carbohydrate- and lipid-derived products were decreased in the bio-oil after the dry torrefaction pretreatment. Similarly, microwave-assisted wet torrefaction in sulfuric acid is an effective pretreatment technique to produce high-quality pyrolytic bio-oil for biofuel production.

Original languageEnglish
Article number118579
JournalEnergy
Volume210
DOIs
Publication statusPublished - 2020 Nov 1

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Modelling and Simulation
  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Pollution
  • General Energy
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Management, Monitoring, Policy and Law
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Effects of dry and wet torrefaction pretreatment on microalgae pyrolysis analyzed by TG-FTIR and double-shot Py-GC/MS'. Together they form a unique fingerprint.

Cite this