Effects of passivation and extraction surface trap density on the 1/f noise of HgCdTe photoconductive detector

C. T. Lin, Y. K. Su, S. J. Chang, H. T. Huang, S. M. Chang, T. P. Sun

Research output: Contribution to journalArticlepeer-review

24 Citations (Scopus)

Abstract

Experimental results are presented for noise voltage, responsivity, and specific detectivity (D*) for the long wavelength infrared (IR) HgCdTe photoconductive detectors. Hg0.8Cd0.2Te photoconductive detectors passivated with ZnS/photo-enhanced native oxide have an improved noise spectral density and D* than the detectors passivated with only ZnS. The low frequency 1/f noise charges were measured for a Hg0.8Cd0.2Te photo detector, as a function of bias at 77 K, and the effective surface trap density determined from the 1/f noise charges measured at 1 Hz. It was found that the surface effective trap densities of stacked passivated sample and the sample passivated only with ZnS are close to 4 × 1017 and 9 × 1017 cm-2. eV-1 under 0.4 V bias and 1 μs integration time, respectively. We found that the numerical values of noise are strongly dependent upon surface passivation properties. It can be seen clearly that an HgCdTe photo detector with a stacked ZnS/photo-enhanced native oxide passivation is better than the HgCdTe photo detector passivated with a single ZnS layer.

Original languageEnglish
Pages (from-to)232-234
Number of pages3
JournalIEEE Photonics Technology Letters
Volume9
Issue number2
DOIs
Publication statusPublished - 1997 Feb 1

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Effects of passivation and extraction surface trap density on the 1/f noise of HgCdTe photoconductive detector'. Together they form a unique fingerprint.

Cite this