Error measurement and calibration in developing virtual-reality-assisted microassembly system

Ren Jung Chang, Jia Cheng Jau

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The operational error of a virtual reality (VR) assisted vision-based microassembly system is measured and calibrated during the system development stage. The vision-based microassembly system was designed and its opto-mechanical model was established in a virtual environment. By measuring the errors between the representative points in the images of virtual cameras and charge-coupled device (CCD) visual systems, the errors in the virtual environment were compensated by correcting the projection matrix parameters, the view matrix parameters, the initial components position, and the deviation angle for the working stage motion. The effectiveness of the proposed VR-assisted fine calibration method was tested by performing VR calibration on the virtual system.

Original languageEnglish
Pages (from-to)619-628
Number of pages10
JournalInternational Journal of Automation Technology
Volume9
Issue number6
DOIs
Publication statusPublished - 2015 Nov

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Error measurement and calibration in developing virtual-reality-assisted microassembly system'. Together they form a unique fingerprint.

  • Cite this