Fabrication of modified lead titanate piezoceramics with zero temperature coefficient and its application on SAW devices

Sheng Yuan Chu; Te Yi Chen

doi:10.1109/TUFFC.2004.1304264

Fabrication of modified lead titanate piezoceramics with zero temperature coefficient and its application on SAW devices

Sheng Yuan Chu, Te Yi Chen

Department of Electrical Engineering

Research output: Contribution to journal › Article › peer-review

17 Citations (Scopus)

Abstract

The Samarium-modified, lead titanate ceramics with a composition of (Pb_0.67Ca_0.15Sr_0.06Sm_0.08) (Ti _0.98Mn_0.02)O₃ were prepared by conventional mixed-oxide method. By properly varying the sintering and poling conditions, the samples with zero temperature coefficient of resonant frequency were fabricated. The piezoelectric and dielectric properties were measured; it showed that the samples with zero temperature coefficient still keep high-thickness, electromechanical coupling coefficient, k_t(>0.55), and small planar electromechanical coupling coefficient, k_p. Surface acoustic wave (SAW) filters were fabricated; and the properties, including phase velocity and electromechanical coupling coefficient, were measured. Microstructural and compositional analyses have been carried out using scanning electron microscopy and x-ray diffraction.

Original language	English
Pages (from-to)	663-667
Number of pages	5
Journal	IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Volume	51
Issue number	6
DOIs	https://doi.org/10.1109/TUFFC.2004.1304264
Publication status	Published - 2004 Jun

All Science Journal Classification (ASJC) codes

Instrumentation
Acoustics and Ultrasonics
Electrical and Electronic Engineering

Access to Document

10.1109/TUFFC.2004.1304264

Cite this

@article{3d9231c05051487e9366dd8ab8c93681,

title = "Fabrication of modified lead titanate piezoceramics with zero temperature coefficient and its application on SAW devices",

abstract = "The Samarium-modified, lead titanate ceramics with a composition of (Pb0.67Ca0.15Sr0.06Sm0.08) (Ti 0.98Mn0.02)O3 were prepared by conventional mixed-oxide method. By properly varying the sintering and poling conditions, the samples with zero temperature coefficient of resonant frequency were fabricated. The piezoelectric and dielectric properties were measured; it showed that the samples with zero temperature coefficient still keep high-thickness, electromechanical coupling coefficient, kt(>0.55), and small planar electromechanical coupling coefficient, kp. Surface acoustic wave (SAW) filters were fabricated; and the properties, including phase velocity and electromechanical coupling coefficient, were measured. Microstructural and compositional analyses have been carried out using scanning electron microscopy and x-ray diffraction.",

author = "Chu, {Sheng Yuan} and Chen, {Te Yi}",

year = "2004",

month = jun,

doi = "10.1109/TUFFC.2004.1304264",

language = "English",

volume = "51",

pages = "663--667",

journal = "IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control",

issn = "0885-3010",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "6",

}

TY - JOUR

T1 - Fabrication of modified lead titanate piezoceramics with zero temperature coefficient and its application on SAW devices

AU - Chu, Sheng Yuan

AU - Chen, Te Yi

PY - 2004/6

Y1 - 2004/6

N2 - The Samarium-modified, lead titanate ceramics with a composition of (Pb0.67Ca0.15Sr0.06Sm0.08) (Ti 0.98Mn0.02)O3 were prepared by conventional mixed-oxide method. By properly varying the sintering and poling conditions, the samples with zero temperature coefficient of resonant frequency were fabricated. The piezoelectric and dielectric properties were measured; it showed that the samples with zero temperature coefficient still keep high-thickness, electromechanical coupling coefficient, kt(>0.55), and small planar electromechanical coupling coefficient, kp. Surface acoustic wave (SAW) filters were fabricated; and the properties, including phase velocity and electromechanical coupling coefficient, were measured. Microstructural and compositional analyses have been carried out using scanning electron microscopy and x-ray diffraction.

AB - The Samarium-modified, lead titanate ceramics with a composition of (Pb0.67Ca0.15Sr0.06Sm0.08) (Ti 0.98Mn0.02)O3 were prepared by conventional mixed-oxide method. By properly varying the sintering and poling conditions, the samples with zero temperature coefficient of resonant frequency were fabricated. The piezoelectric and dielectric properties were measured; it showed that the samples with zero temperature coefficient still keep high-thickness, electromechanical coupling coefficient, kt(>0.55), and small planar electromechanical coupling coefficient, kp. Surface acoustic wave (SAW) filters were fabricated; and the properties, including phase velocity and electromechanical coupling coefficient, were measured. Microstructural and compositional analyses have been carried out using scanning electron microscopy and x-ray diffraction.

UR - http://www.scopus.com/inward/record.url?scp=3042677656&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=3042677656&partnerID=8YFLogxK

U2 - 10.1109/TUFFC.2004.1304264

DO - 10.1109/TUFFC.2004.1304264

M3 - Article

C2 - 15244279

AN - SCOPUS:3042677656

SN - 0885-3010

VL - 51

SP - 663

EP - 667

JO - IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

JF - IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

IS - 6

ER -

Fabrication of modified lead titanate piezoceramics with zero temperature coefficient and its application on SAW devices

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this