Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses

Chang Shuo Chang; Kung Hsu Hou; Ming Der Ger; Chen Kuei Chung; Jen Fin Lin

doi:10.4028/www.scientific.net/KEM.642.286

Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses

Chang Shuo Chang
, Kung Hsu Hou
, Ming Der Ger
, Chen Kuei Chung
, Jen Fin Lin

Department of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

In the present study, SiC reinforced particles were introduced to the Ni-P plating bath, and developed high SiC content composite coatings. Thin films nature properties and mechanical performances were evaluated well. The results showed that the Ni-P alloy embedded SiC particles formed a few cavities, and reduced coatings hardness and wear resistance in as-plated condition. After 400°C heat-treatment, Ni₃P crystalline phase formed and reached the max hardness, and conducted excellent trybological performances. SiC particles were decoposited in 600°C and reacted with Ni to form Ni₃Si and Ni₅Si₂, caused the decreasing in hardness.

Original language	English
Title of host publication	Tribology Engineering
Editors	Yunn-Lin Hwang, Jeng-Haur Horng, Chin-Chung Wei
Publisher	Trans Tech Publications Ltd
Pages	286-291
Number of pages	6
ISBN (Electronic)	9783038354581
DOIs	https://doi.org/10.4028/www.scientific.net/KEM.642.286
Publication status	Published - 2015
Event	International Conference on Engineering Tribology Technology, ICETT 2014 - Nantou, Taiwan Duration: 2014 Nov 21 → 2014 Nov 23

Publication series

Name	Key Engineering Materials
Volume	642
ISSN (Print)	1013-9826
ISSN (Electronic)	1662-9795

Other

Other	International Conference on Engineering Tribology Technology, ICETT 2014
Country/Territory	Taiwan
City	Nantou
Period	14-11-21 → 14-11-23

All Science Journal Classification (ASJC) codes

General Materials Science
Mechanics of Materials
Mechanical Engineering

Access to Document

10.4028/www.scientific.net/KEM.642.286

Cite this

Chang, C. S., Hou, K. H., Ger, M. D., Chung, C. K., & Lin, J. F. (2015). Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses. In Y.-L. Hwang, J.-H. Horng, & C.-C. Wei (Eds.), Tribology Engineering (pp. 286-291). (Key Engineering Materials; Vol. 642). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.642.286

@inproceedings{c7292c868a0541d19898c90a116d547a,

title = "Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses",

abstract = "In the present study, SiC reinforced particles were introduced to the Ni-P plating bath, and developed high SiC content composite coatings. Thin films nature properties and mechanical performances were evaluated well. The results showed that the Ni-P alloy embedded SiC particles formed a few cavities, and reduced coatings hardness and wear resistance in as-plated condition. After 400°C heat-treatment, Ni3P crystalline phase formed and reached the max hardness, and conducted excellent trybological performances. SiC particles were decoposited in 600°C and reacted with Ni to form Ni3Si and Ni5Si2, caused the decreasing in hardness.",

author = "Chang, \{Chang Shuo\} and Hou, \{Kung Hsu\} and Ger, \{Ming Der\} and Chung, \{Chen Kuei\} and Lin, \{Jen Fin\}",

note = "Publisher Copyright: {\textcopyright} 2015 Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; International Conference on Engineering Tribology Technology, ICETT 2014 ; Conference date: 21-11-2014 Through 23-11-2014",

year = "2015",

doi = "10.4028/www.scientific.net/KEM.642.286",

language = "English",

series = "Key Engineering Materials",

publisher = "Trans Tech Publications Ltd",

pages = "286--291",

editor = "Yunn-Lin Hwang and Jeng-Haur Horng and Chin-Chung Wei",

booktitle = "Tribology Engineering",

}

Chang, CS, Hou, KH, Ger, MD, Chung, CK & Lin, JF 2015, Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses. in Y-L Hwang, J-H Horng & C-C Wei (eds), Tribology Engineering. Key Engineering Materials, vol. 642, Trans Tech Publications Ltd, pp. 286-291, International Conference on Engineering Tribology Technology, ICETT 2014, Nantou, Taiwan, 14-11-21. https://doi.org/10.4028/www.scientific.net/KEM.642.286

Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses. / Chang, Chang Shuo; Hou, Kung Hsu; Ger, Ming Der et al.
Tribology Engineering. ed. / Yunn-Lin Hwang; Jeng-Haur Horng; Chin-Chung Wei. Trans Tech Publications Ltd, 2015. p. 286-291 (Key Engineering Materials; Vol. 642).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses

AU - Chang, Chang Shuo

AU - Hou, Kung Hsu

AU - Ger, Ming Der

AU - Chung, Chen Kuei

AU - Lin, Jen Fin

PY - 2015

Y1 - 2015

N2 - In the present study, SiC reinforced particles were introduced to the Ni-P plating bath, and developed high SiC content composite coatings. Thin films nature properties and mechanical performances were evaluated well. The results showed that the Ni-P alloy embedded SiC particles formed a few cavities, and reduced coatings hardness and wear resistance in as-plated condition. After 400°C heat-treatment, Ni3P crystalline phase formed and reached the max hardness, and conducted excellent trybological performances. SiC particles were decoposited in 600°C and reacted with Ni to form Ni3Si and Ni5Si2, caused the decreasing in hardness.

AB - In the present study, SiC reinforced particles were introduced to the Ni-P plating bath, and developed high SiC content composite coatings. Thin films nature properties and mechanical performances were evaluated well. The results showed that the Ni-P alloy embedded SiC particles formed a few cavities, and reduced coatings hardness and wear resistance in as-plated condition. After 400°C heat-treatment, Ni3P crystalline phase formed and reached the max hardness, and conducted excellent trybological performances. SiC particles were decoposited in 600°C and reacted with Ni to form Ni3Si and Ni5Si2, caused the decreasing in hardness.

UR - https://www.scopus.com/pages/publications/84930172658

UR - https://www.scopus.com/pages/publications/84930172658#tab=citedBy

U2 - 10.4028/www.scientific.net/KEM.642.286

DO - 10.4028/www.scientific.net/KEM.642.286

M3 - Conference contribution

AN - SCOPUS:84930172658

T3 - Key Engineering Materials

SP - 286

EP - 291

BT - Tribology Engineering

A2 - Hwang, Yunn-Lin

A2 - Horng, Jeng-Haur

A2 - Wei, Chin-Chung

PB - Trans Tech Publications Ltd

T2 - International Conference on Engineering Tribology Technology, ICETT 2014

Y2 - 21 November 2014 through 23 November 2014

ER -

Fabrications of electroless Ni-P composite coatings before and after annealing and tribological analyses

Abstract

Publication series

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this