Fibers and conductive films using silver nanoparticles and nanowires by near-field electrospinning process

Cheng Tang Pan; Tsung Lin Yang; Yi Chian Chen; Cherng Yuh Su; Shin Pon Ju; Kun Hao Hung; I. Chou Wu; Ci Chang Hsieh; Sheng Chih Shen

doi:10.1155/2015/494052

Fibers and conductive films using silver nanoparticles and nanowires by near-field electrospinning process

Cheng Tang Pan, Tsung Lin Yang, Yi Chian Chen, Cherng Yuh Su, Shin Pon Ju, Kun Hao Hung, I. Chou Wu, Ci Chang Hsieh, Sheng Chih Shen

Department of Systems and Naval Mechatronic Engineering

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Abstract

The silver nanowires (AgNWs) and silver nanoparticles (AgNPs) were synthesized. With near-field electrospinning (NFES) process, fibers and thin films with AgNPs and AgNWs were fabricated. In the NFES process, 10 k voltage was applied and the AgNPs and AgNWs fibers can be directly orderly collected without breaking and bending. Then, the characteristics of the fibers were analyzed by four-point probe and EDS. The conductive film was analyzed. When the thickness of films with AgNWs and AgNPs was 1.6 μm, the sheet resistance of films was 0.032 Ω/sq which was superior to that of the commercial ITO. The transmissivity of films was analyzed. The transmissivity was inversely proportional to sheet resistance of the films. In the future, the fibers and films can be used as transparent conductive electrodes.

Original language	English
Article number	494052
Journal	Journal of Nanomaterials
Volume	2015
DOIs	https://doi.org/10.1155/2015/494052
Publication status	Published - 2015

All Science Journal Classification (ASJC) codes

General Materials Science

Access to Document

10.1155/2015/494052

Cite this

@article{e6816ad9f44a465d836b3b5c1b7489ff,

title = "Fibers and conductive films using silver nanoparticles and nanowires by near-field electrospinning process",

abstract = "The silver nanowires (AgNWs) and silver nanoparticles (AgNPs) were synthesized. With near-field electrospinning (NFES) process, fibers and thin films with AgNPs and AgNWs were fabricated. In the NFES process, 10 k voltage was applied and the AgNPs and AgNWs fibers can be directly orderly collected without breaking and bending. Then, the characteristics of the fibers were analyzed by four-point probe and EDS. The conductive film was analyzed. When the thickness of films with AgNWs and AgNPs was 1.6 μm, the sheet resistance of films was 0.032 Ω/sq which was superior to that of the commercial ITO. The transmissivity of films was analyzed. The transmissivity was inversely proportional to sheet resistance of the films. In the future, the fibers and films can be used as transparent conductive electrodes.",

author = "Pan, {Cheng Tang} and Yang, {Tsung Lin} and Chen, {Yi Chian} and Su, {Cherng Yuh} and Ju, {Shin Pon} and Hung, {Kun Hao} and Wu, {I. Chou} and Hsieh, {Ci Chang} and Shen, {Sheng Chih}",

note = "Publisher Copyright: Copyright {\textcopyright} 2015 Cheng-Tang Pan et al.",

year = "2015",

doi = "10.1155/2015/494052",

language = "English",

volume = "2015",

journal = "Journal of Nanomaterials",

issn = "1687-4110",

publisher = "Hindawi Publishing Corporation",

}

TY - JOUR

T1 - Fibers and conductive films using silver nanoparticles and nanowires by near-field electrospinning process

AU - Pan, Cheng Tang

AU - Yang, Tsung Lin

AU - Chen, Yi Chian

AU - Su, Cherng Yuh

AU - Ju, Shin Pon

AU - Hung, Kun Hao

AU - Wu, I. Chou

AU - Hsieh, Ci Chang

AU - Shen, Sheng Chih

PY - 2015

Y1 - 2015

N2 - The silver nanowires (AgNWs) and silver nanoparticles (AgNPs) were synthesized. With near-field electrospinning (NFES) process, fibers and thin films with AgNPs and AgNWs were fabricated. In the NFES process, 10 k voltage was applied and the AgNPs and AgNWs fibers can be directly orderly collected without breaking and bending. Then, the characteristics of the fibers were analyzed by four-point probe and EDS. The conductive film was analyzed. When the thickness of films with AgNWs and AgNPs was 1.6 μm, the sheet resistance of films was 0.032 Ω/sq which was superior to that of the commercial ITO. The transmissivity of films was analyzed. The transmissivity was inversely proportional to sheet resistance of the films. In the future, the fibers and films can be used as transparent conductive electrodes.

AB - The silver nanowires (AgNWs) and silver nanoparticles (AgNPs) were synthesized. With near-field electrospinning (NFES) process, fibers and thin films with AgNPs and AgNWs were fabricated. In the NFES process, 10 k voltage was applied and the AgNPs and AgNWs fibers can be directly orderly collected without breaking and bending. Then, the characteristics of the fibers were analyzed by four-point probe and EDS. The conductive film was analyzed. When the thickness of films with AgNWs and AgNPs was 1.6 μm, the sheet resistance of films was 0.032 Ω/sq which was superior to that of the commercial ITO. The transmissivity of films was analyzed. The transmissivity was inversely proportional to sheet resistance of the films. In the future, the fibers and films can be used as transparent conductive electrodes.

UR - http://www.scopus.com/inward/record.url?scp=84929346518&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84929346518&partnerID=8YFLogxK

U2 - 10.1155/2015/494052

DO - 10.1155/2015/494052

M3 - Article

AN - SCOPUS:84929346518

SN - 1687-4110

VL - 2015

JO - Journal of Nanomaterials

JF - Journal of Nanomaterials

M1 - 494052

ER -

Fibers and conductive films using silver nanoparticles and nanowires by near-field electrospinning process

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this