Hydrogen as a quick indicator of organic shock loading in UASB

Y. H. Huang, G. H. Huang, S. Chou, S. S. Cheng

Research output: Contribution to journalConference article

14 Citations (Scopus)

Abstract

This study investigates the influence of organic shock loading on H2 production in an upflow anaerobic sludge bed (UASB) reactor. An esterification wastewater produced from a polyethylene terephthalate (PET) manufacturing plant was applied; the major organic pollutants are ethylene glycol and acetaldehyde. Experiments of two influent modes were performed here: a continuous-flow mode with a step input of shock loading and a batch mode with a pulse input of shock loading. Results of the continuous-flow experiments indicate that biogas production parameters such as H2 concentration and biogas production rate are more sensitive than water quality parameters such as pH, ORP, COD and TOC. In particular, H2, increasing by 140% within 1 hour, is a very important index upon the organic shock loading. It changes from 120 ppm to over 600 ppm as the organic loading rate increases from 4.4 to 13.2 kgCOD/m3 · day through 4 hours of shock loading. Experiments of the batch shock loading with different pulse dosages of ethylene glycol, acetaldehyde and the raw wastewater were also investigated. The amount of H2 production increased in proportion to an increase of organic load. Furthermore, the sequence of H2 production among the three types of shock loading is acetaldehyde>ethylene glycol>raw wastewater. To sum up, H2 shows a faster response rate than the other parameters. Therefore, H2 can be adopted as an important parameter for organic shock loading in UASB.

Original languageEnglish
Pages (from-to)43-50
Number of pages8
JournalWater Science and Technology
Volume42
Issue number3-4
Publication statusPublished - 2000 Nov 13
EventWater Quality Management in Asia (Asian Waterqual'99) - Taipei, Taiwan
Duration: 1999 Oct 181999 Oct 20

Fingerprint

acetaldehyde
sludge
Acetaldehyde
hydrogen
ethylene
Hydrogen
Ethylene glycol
biogas
Wastewater
wastewater
Biogas
experiment
organic pollutant
Organic pollutants
Experiments
Esterification
manufacturing
Polyethylene terephthalates
Water quality
water quality

All Science Journal Classification (ASJC) codes

  • Environmental Engineering
  • Water Science and Technology

Cite this

Huang, Y. H., Huang, G. H., Chou, S., & Cheng, S. S. (2000). Hydrogen as a quick indicator of organic shock loading in UASB. Water Science and Technology, 42(3-4), 43-50.
Huang, Y. H. ; Huang, G. H. ; Chou, S. ; Cheng, S. S. / Hydrogen as a quick indicator of organic shock loading in UASB. In: Water Science and Technology. 2000 ; Vol. 42, No. 3-4. pp. 43-50.
@article{8ba671a2d1044dcb965eb0148d827e53,
title = "Hydrogen as a quick indicator of organic shock loading in UASB",
abstract = "This study investigates the influence of organic shock loading on H2 production in an upflow anaerobic sludge bed (UASB) reactor. An esterification wastewater produced from a polyethylene terephthalate (PET) manufacturing plant was applied; the major organic pollutants are ethylene glycol and acetaldehyde. Experiments of two influent modes were performed here: a continuous-flow mode with a step input of shock loading and a batch mode with a pulse input of shock loading. Results of the continuous-flow experiments indicate that biogas production parameters such as H2 concentration and biogas production rate are more sensitive than water quality parameters such as pH, ORP, COD and TOC. In particular, H2, increasing by 140{\%} within 1 hour, is a very important index upon the organic shock loading. It changes from 120 ppm to over 600 ppm as the organic loading rate increases from 4.4 to 13.2 kgCOD/m3 · day through 4 hours of shock loading. Experiments of the batch shock loading with different pulse dosages of ethylene glycol, acetaldehyde and the raw wastewater were also investigated. The amount of H2 production increased in proportion to an increase of organic load. Furthermore, the sequence of H2 production among the three types of shock loading is acetaldehyde>ethylene glycol>raw wastewater. To sum up, H2 shows a faster response rate than the other parameters. Therefore, H2 can be adopted as an important parameter for organic shock loading in UASB.",
author = "Huang, {Y. H.} and Huang, {G. H.} and S. Chou and Cheng, {S. S.}",
year = "2000",
month = "11",
day = "13",
language = "English",
volume = "42",
pages = "43--50",
journal = "Water Science and Technology",
issn = "0273-1223",
publisher = "IWA Publishing",
number = "3-4",

}

Huang, YH, Huang, GH, Chou, S & Cheng, SS 2000, 'Hydrogen as a quick indicator of organic shock loading in UASB', Water Science and Technology, vol. 42, no. 3-4, pp. 43-50.

Hydrogen as a quick indicator of organic shock loading in UASB. / Huang, Y. H.; Huang, G. H.; Chou, S.; Cheng, S. S.

In: Water Science and Technology, Vol. 42, No. 3-4, 13.11.2000, p. 43-50.

Research output: Contribution to journalConference article

TY - JOUR

T1 - Hydrogen as a quick indicator of organic shock loading in UASB

AU - Huang, Y. H.

AU - Huang, G. H.

AU - Chou, S.

AU - Cheng, S. S.

PY - 2000/11/13

Y1 - 2000/11/13

N2 - This study investigates the influence of organic shock loading on H2 production in an upflow anaerobic sludge bed (UASB) reactor. An esterification wastewater produced from a polyethylene terephthalate (PET) manufacturing plant was applied; the major organic pollutants are ethylene glycol and acetaldehyde. Experiments of two influent modes were performed here: a continuous-flow mode with a step input of shock loading and a batch mode with a pulse input of shock loading. Results of the continuous-flow experiments indicate that biogas production parameters such as H2 concentration and biogas production rate are more sensitive than water quality parameters such as pH, ORP, COD and TOC. In particular, H2, increasing by 140% within 1 hour, is a very important index upon the organic shock loading. It changes from 120 ppm to over 600 ppm as the organic loading rate increases from 4.4 to 13.2 kgCOD/m3 · day through 4 hours of shock loading. Experiments of the batch shock loading with different pulse dosages of ethylene glycol, acetaldehyde and the raw wastewater were also investigated. The amount of H2 production increased in proportion to an increase of organic load. Furthermore, the sequence of H2 production among the three types of shock loading is acetaldehyde>ethylene glycol>raw wastewater. To sum up, H2 shows a faster response rate than the other parameters. Therefore, H2 can be adopted as an important parameter for organic shock loading in UASB.

AB - This study investigates the influence of organic shock loading on H2 production in an upflow anaerobic sludge bed (UASB) reactor. An esterification wastewater produced from a polyethylene terephthalate (PET) manufacturing plant was applied; the major organic pollutants are ethylene glycol and acetaldehyde. Experiments of two influent modes were performed here: a continuous-flow mode with a step input of shock loading and a batch mode with a pulse input of shock loading. Results of the continuous-flow experiments indicate that biogas production parameters such as H2 concentration and biogas production rate are more sensitive than water quality parameters such as pH, ORP, COD and TOC. In particular, H2, increasing by 140% within 1 hour, is a very important index upon the organic shock loading. It changes from 120 ppm to over 600 ppm as the organic loading rate increases from 4.4 to 13.2 kgCOD/m3 · day through 4 hours of shock loading. Experiments of the batch shock loading with different pulse dosages of ethylene glycol, acetaldehyde and the raw wastewater were also investigated. The amount of H2 production increased in proportion to an increase of organic load. Furthermore, the sequence of H2 production among the three types of shock loading is acetaldehyde>ethylene glycol>raw wastewater. To sum up, H2 shows a faster response rate than the other parameters. Therefore, H2 can be adopted as an important parameter for organic shock loading in UASB.

UR - http://www.scopus.com/inward/record.url?scp=0033744352&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033744352&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0033744352

VL - 42

SP - 43

EP - 50

JO - Water Science and Technology

JF - Water Science and Technology

SN - 0273-1223

IS - 3-4

ER -