Abstract
Hydrolyzed waste aluminum foil in low alkaline aqueous solution and concomitant additives are evaluated to generate hydrogen gas. The result of hydrogen generation using wasted Al foil is efficient in comparison with traditional Al powder. A polythene film coated on waste Al foil was removed by immersing into nitric acid for 5 h prior to hydrolyzed reaction. Low alkaline solution (0.75 M NaOH) combined with Bi additives at elevating temperature (70 °C) in waste Al foil-water hydrolysis system enable to increase hydrogen generation rate to 30 ml s−1 g−1 and total volume 1300 ml g−1. The optimized result is attributed to the micro-galvanic cell formation between Al/Bi and removing hydroxide on Al foil surface by alkaline solution. In this report we develop low cost and waste recovery by hydrolyzing waste Al foil. High efficiency of hydrogen generation is achieved by low alkaline concentration and reducing activation energy. Al oxidation mechanism is explained by the linear-parabolic growth model and polarization curves indicate that corrosion potential of Al foils did not abruptly degrade and the corrosion capability with reliability were verified.
Original language | English |
---|---|
Pages (from-to) | 19622-19628 |
Number of pages | 7 |
Journal | International Journal of Hydrogen Energy |
Volume | 42 |
Issue number | 31 |
DOIs | |
Publication status | Published - 2017 Aug 3 |
All Science Journal Classification (ASJC) codes
- Renewable Energy, Sustainability and the Environment
- Fuel Technology
- Condensed Matter Physics
- Energy Engineering and Power Technology