Influence of conductive nano-TiC on microstructural evolution of Si 3N4-based nanocomposites in spark plasma sintering

Ching Huan Lee, Horng Hwa Lu, Chang An Wang, Pramoda K. Nayak, Jow Lay Huang

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

A conductive TiC nanopowder was incorporated into nanosized β-Si 3N4-based powder and consolidated by a spark plasma sintering (SPS) technique with a rapid heating process. The influence of the conductive phase on the microstructure development of the Si3N 4 matrix was demonstrated. After sintering, the conductive phase transformed into titanium oxycarbonitride. The Si3N4-based composite containing 5 wt% nano-TiCxOyNz shows a larger average grain size and aspect ratio than the monolithic Si 3N4-based ceramic. This is possibly because a leakage current hops across the conductive titanium oxycarbonitride grains and causes Joule heating during sintering. The transmission electron microscopy analysis confirmed that dissolution-reprecipitation and coalescence occur. In addition, although the increasing amount of incorporated nano-TiCxO yNz (10 and 20 wt%) decreases the electrical resistivity of the composites, the pinning effect of the titanium-based phase significantly suppresses the grain growth of Si3N4 matrix grains. β-Si3N4-based nanocomposites containing nanosized titanium oxycarbonitride were thus obtained in the present study.

Original languageEnglish
Pages (from-to)959-967
Number of pages9
JournalJournal of the American Ceramic Society
Volume94
Issue number3
DOIs
Publication statusPublished - 2011 Mar 1

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Influence of conductive nano-TiC on microstructural evolution of Si <sub>3</sub>N<sub>4</sub>-based nanocomposites in spark plasma sintering'. Together they form a unique fingerprint.

  • Cite this