Microstructures and charge-discharging properties of selective laser sintering applied to the anode of magnesium matrix

Yen Ting Chen; Fei Yi Hung; Truan Sheng Lui; Jia Zheng Hong

doi:10.2320/matertrans.M2016415

Microstructures and charge-discharging properties of selective laser sintering applied to the anode of magnesium matrix

Yen Ting Chen, Fei Yi Hung, Truan Sheng Lui, Jia Zheng Hong

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Abstract

Selective laser sintering (SLS) is an additive manufacturing (3D printing) technique that can be applied to the anode of lithium batteries to simplify the manufacturing process and enhance the production efficiency. The specific surface nanostructures and intermetallic compounds (IMC) induced by the SLS process can improve the capacity and cycle life. In this study, a stable anode for a lithium ion battery was successfully fabricated by the SLS process, the capacity of the battery exceeded 150 mAhg^-1 after 10 cycles under a 0.1 C current rate at room temperature. Moreover, the capacity enhanced to 250 mAhg^-1 after 10 cycles under a 0.1 C current rate at the high temperature of 55°C. The results show the potential of the SLS technique for application in the lithium ion battery industry.

Original language	English
Pages (from-to)	525-529
Number of pages	5
Journal	Materials Transactions
Volume	58
Issue number	4
DOIs	https://doi.org/10.2320/matertrans.M2016415
Publication status	Published - 2017

All Science Journal Classification (ASJC) codes

Materials Science(all)
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.2320/matertrans.M2016415

Cite this

@article{ba155f3370b5454da9ee2edd6c7d42ce,

title = "Microstructures and charge-discharging properties of selective laser sintering applied to the anode of magnesium matrix",

abstract = "Selective laser sintering (SLS) is an additive manufacturing (3D printing) technique that can be applied to the anode of lithium batteries to simplify the manufacturing process and enhance the production efficiency. The specific surface nanostructures and intermetallic compounds (IMC) induced by the SLS process can improve the capacity and cycle life. In this study, a stable anode for a lithium ion battery was successfully fabricated by the SLS process, the capacity of the battery exceeded 150 mAhg-1 after 10 cycles under a 0.1 C current rate at room temperature. Moreover, the capacity enhanced to 250 mAhg-1 after 10 cycles under a 0.1 C current rate at the high temperature of 55°C. The results show the potential of the SLS technique for application in the lithium ion battery industry.",

author = "Chen, {Yen Ting} and Hung, {Fei Yi} and Lui, {Truan Sheng} and Hong, {Jia Zheng}",

note = "Funding Information: The authors are grateful to the Instrument Center of National Cheng Kung University and the National Science Council of Taiwan (MOST 105-2628-E-006-001-MY2) for their financial support. Publisher Copyright: {\textcopyright} 2017 The Japan Institute of Metals and Materials.",

year = "2017",

doi = "10.2320/matertrans.M2016415",

language = "English",

volume = "58",

pages = "525--529",

journal = "Materials Transactions",

issn = "0916-1821",

publisher = "Japan Institute of Metals (JIM)",

number = "4",

}

TY - JOUR

T1 - Microstructures and charge-discharging properties of selective laser sintering applied to the anode of magnesium matrix

AU - Chen, Yen Ting

AU - Hung, Fei Yi

AU - Lui, Truan Sheng

AU - Hong, Jia Zheng

N1 - Funding Information: The authors are grateful to the Instrument Center of National Cheng Kung University and the National Science Council of Taiwan (MOST 105-2628-E-006-001-MY2) for their financial support. Publisher Copyright: © 2017 The Japan Institute of Metals and Materials.

PY - 2017

Y1 - 2017

N2 - Selective laser sintering (SLS) is an additive manufacturing (3D printing) technique that can be applied to the anode of lithium batteries to simplify the manufacturing process and enhance the production efficiency. The specific surface nanostructures and intermetallic compounds (IMC) induced by the SLS process can improve the capacity and cycle life. In this study, a stable anode for a lithium ion battery was successfully fabricated by the SLS process, the capacity of the battery exceeded 150 mAhg-1 after 10 cycles under a 0.1 C current rate at room temperature. Moreover, the capacity enhanced to 250 mAhg-1 after 10 cycles under a 0.1 C current rate at the high temperature of 55°C. The results show the potential of the SLS technique for application in the lithium ion battery industry.

AB - Selective laser sintering (SLS) is an additive manufacturing (3D printing) technique that can be applied to the anode of lithium batteries to simplify the manufacturing process and enhance the production efficiency. The specific surface nanostructures and intermetallic compounds (IMC) induced by the SLS process can improve the capacity and cycle life. In this study, a stable anode for a lithium ion battery was successfully fabricated by the SLS process, the capacity of the battery exceeded 150 mAhg-1 after 10 cycles under a 0.1 C current rate at room temperature. Moreover, the capacity enhanced to 250 mAhg-1 after 10 cycles under a 0.1 C current rate at the high temperature of 55°C. The results show the potential of the SLS technique for application in the lithium ion battery industry.

UR - http://www.scopus.com/inward/record.url?scp=85016413941&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85016413941&partnerID=8YFLogxK

U2 - 10.2320/matertrans.M2016415

DO - 10.2320/matertrans.M2016415

M3 - Article

AN - SCOPUS:85016413941

SN - 0916-1821

VL - 58

SP - 525

EP - 529

JO - Materials Transactions

JF - Materials Transactions

IS - 4

ER -

Microstructures and charge-discharging properties of selective laser sintering applied to the anode of magnesium matrix

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this