Optimum multilayer TiN-TiCN coatings for wear resistance and actual application

Y. L. Su, W. H. Kao

Research output: Contribution to journalArticle

58 Citations (Scopus)

Abstract

This work employed the PVD process to deposit coatings of single layer TiN, binary layer TiN/TiCN, multilayer TiN\Ti\TiN and sequenced TiN\TiCN\TiN multilayer coatings with variable individual TiN and TiCN layers' thickness on tungsten carbide disks and inserts. Also investigated herein were the fracture mechanisms and the influence of sequence and thickness of these coatings on cylinder-on-disk line contact wear mode and ball-on-disk point contact wear mode through SRV reciprocating wear tests. Actual milling tests were also performed to identify the wear performance. Experimental results indicate that the coating with a total thickness of 7 μm and layer sequence TiN/TiCN/TiN exhibits good wear resistance on SRV wear test and milling test. The thickest multilayer TiN/Ti/TiN coating, although having the highest hardness, has the worst wear resistance for all tests. Notably zero-wear performance was observed for all coating disks under cutting fluid lubricated condition due to the transferred layers formed between the contact interface.

Original languageEnglish
Pages (from-to)119-130
Number of pages12
JournalWear
Volume223
Issue number1-2
DOIs
Publication statusPublished - 1998 Dec 1

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Optimum multilayer TiN-TiCN coatings for wear resistance and actual application'. Together they form a unique fingerprint.

Cite this