Prediction of equivalent-circuit parameters for double-layer capacitors module

Chien-Hsing Lee, Shih Hsien Hsu

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Although low energy density and low voltage tolerance limit the effectiveness of double-layer capacitors (DLCs) as a storage unit, many different lumped-parameter equivalent circuits have been recently proposed for the DLC. The purpose of this work is to predict equivalent-circuit parameters for DLC modules consisting of a single supercapacitor product of Maxwell BCAP3000-P270-T04 with a capacitance of 3000 F and NessCap ESHSR-1600C0-002R7A5T with a capacitance of 1600 F in series, in parallel, or the combination of the both. The equivalent circuit model for the single DLC consists of three RC branches, one of them with a voltage-dependent capacitance. The parameters for the DLC module are identified by charging it from zero to the rated voltage and by measuring its terminal voltage during the internal charge redistribution over the time of 30 min. The simulation and experiment results indicate the prediction of equivalent-circuit parameters concluded in this paper are feasible and effective.

Original languageEnglish
Article number6642061
Pages (from-to)913-920
Number of pages8
JournalIEEE Transactions on Energy Conversion
Volume28
Issue number4
DOIs
Publication statusPublished - 2013 Dec

Fingerprint

Equivalent circuits
Capacitors
Capacitance
Electric potential
Experiments

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

@article{12da4fa3095b405295b5e31f73bcb686,
title = "Prediction of equivalent-circuit parameters for double-layer capacitors module",
abstract = "Although low energy density and low voltage tolerance limit the effectiveness of double-layer capacitors (DLCs) as a storage unit, many different lumped-parameter equivalent circuits have been recently proposed for the DLC. The purpose of this work is to predict equivalent-circuit parameters for DLC modules consisting of a single supercapacitor product of Maxwell BCAP3000-P270-T04 with a capacitance of 3000 F and NessCap ESHSR-1600C0-002R7A5T with a capacitance of 1600 F in series, in parallel, or the combination of the both. The equivalent circuit model for the single DLC consists of three RC branches, one of them with a voltage-dependent capacitance. The parameters for the DLC module are identified by charging it from zero to the rated voltage and by measuring its terminal voltage during the internal charge redistribution over the time of 30 min. The simulation and experiment results indicate the prediction of equivalent-circuit parameters concluded in this paper are feasible and effective.",
author = "Chien-Hsing Lee and Hsu, {Shih Hsien}",
year = "2013",
month = "12",
doi = "10.1109/TEC.2013.2285252",
language = "English",
volume = "28",
pages = "913--920",
journal = "IEEE Transactions on Energy Conversion",
issn = "0885-8969",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "4",

}

Prediction of equivalent-circuit parameters for double-layer capacitors module. / Lee, Chien-Hsing; Hsu, Shih Hsien.

In: IEEE Transactions on Energy Conversion, Vol. 28, No. 4, 6642061, 12.2013, p. 913-920.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Prediction of equivalent-circuit parameters for double-layer capacitors module

AU - Lee, Chien-Hsing

AU - Hsu, Shih Hsien

PY - 2013/12

Y1 - 2013/12

N2 - Although low energy density and low voltage tolerance limit the effectiveness of double-layer capacitors (DLCs) as a storage unit, many different lumped-parameter equivalent circuits have been recently proposed for the DLC. The purpose of this work is to predict equivalent-circuit parameters for DLC modules consisting of a single supercapacitor product of Maxwell BCAP3000-P270-T04 with a capacitance of 3000 F and NessCap ESHSR-1600C0-002R7A5T with a capacitance of 1600 F in series, in parallel, or the combination of the both. The equivalent circuit model for the single DLC consists of three RC branches, one of them with a voltage-dependent capacitance. The parameters for the DLC module are identified by charging it from zero to the rated voltage and by measuring its terminal voltage during the internal charge redistribution over the time of 30 min. The simulation and experiment results indicate the prediction of equivalent-circuit parameters concluded in this paper are feasible and effective.

AB - Although low energy density and low voltage tolerance limit the effectiveness of double-layer capacitors (DLCs) as a storage unit, many different lumped-parameter equivalent circuits have been recently proposed for the DLC. The purpose of this work is to predict equivalent-circuit parameters for DLC modules consisting of a single supercapacitor product of Maxwell BCAP3000-P270-T04 with a capacitance of 3000 F and NessCap ESHSR-1600C0-002R7A5T with a capacitance of 1600 F in series, in parallel, or the combination of the both. The equivalent circuit model for the single DLC consists of three RC branches, one of them with a voltage-dependent capacitance. The parameters for the DLC module are identified by charging it from zero to the rated voltage and by measuring its terminal voltage during the internal charge redistribution over the time of 30 min. The simulation and experiment results indicate the prediction of equivalent-circuit parameters concluded in this paper are feasible and effective.

UR - http://www.scopus.com/inward/record.url?scp=84889086654&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84889086654&partnerID=8YFLogxK

U2 - 10.1109/TEC.2013.2285252

DO - 10.1109/TEC.2013.2285252

M3 - Article

AN - SCOPUS:84889086654

VL - 28

SP - 913

EP - 920

JO - IEEE Transactions on Energy Conversion

JF - IEEE Transactions on Energy Conversion

SN - 0885-8969

IS - 4

M1 - 6642061

ER -