Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model

Jui-Chao Kuo, Delphic Chen, Shih Heng Tung, Ming Hsiang Shih

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

The orientation spread in an aluminum bicrystal was predicted using a DIC-based Taylor model during plane strain compression up to a strain of 5%. The modified Taylor model was integrated with a digital image correlation (DIC) technique, with the aid of which the micro-strain behavior of the bicrystal was investigated, using an experimental approach on one hand and, on the other hand, the strain components determined by DIC were computed for the local orientation rotation together with a Taylor model. It was observed that the higher crystal deforms more than the low crystal. The orientation spread predicted using the modified Taylor model shows a similar trend as that measured by EBSD for the higher crystal, but the spread direction of the low crystal was not correctly predicted using the DIC-based Taylor model.

Original languageEnglish
Pages (from-to)564-569
Number of pages6
JournalComputational Materials Science
Volume42
Issue number4
DOIs
Publication statusPublished - 2008 Jun 1

Fingerprint

Bicrystals
bicrystals
plane strain
Plane Strain
Aluminum
Digital Image
Crystal orientation
Compaction
Compression
aluminum
Crystal
Prediction
predictions
Crystals
crystals
Model
trends

All Science Journal Classification (ASJC) codes

  • Computer Science(all)
  • Chemistry(all)
  • Materials Science(all)
  • Mechanics of Materials
  • Physics and Astronomy(all)
  • Computational Mathematics

Cite this

@article{da5efdc9eff248e1bff2a810b6c52a82,
title = "Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model",
abstract = "The orientation spread in an aluminum bicrystal was predicted using a DIC-based Taylor model during plane strain compression up to a strain of 5{\%}. The modified Taylor model was integrated with a digital image correlation (DIC) technique, with the aid of which the micro-strain behavior of the bicrystal was investigated, using an experimental approach on one hand and, on the other hand, the strain components determined by DIC were computed for the local orientation rotation together with a Taylor model. It was observed that the higher crystal deforms more than the low crystal. The orientation spread predicted using the modified Taylor model shows a similar trend as that measured by EBSD for the higher crystal, but the spread direction of the low crystal was not correctly predicted using the DIC-based Taylor model.",
author = "Jui-Chao Kuo and Delphic Chen and Tung, {Shih Heng} and Shih, {Ming Hsiang}",
year = "2008",
month = "6",
day = "1",
doi = "10.1016/j.commatsci.2007.09.004",
language = "English",
volume = "42",
pages = "564--569",
journal = "Computational Materials Science",
issn = "0927-0256",
publisher = "Elsevier",
number = "4",

}

Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model. / Kuo, Jui-Chao; Chen, Delphic; Tung, Shih Heng; Shih, Ming Hsiang.

In: Computational Materials Science, Vol. 42, No. 4, 01.06.2008, p. 564-569.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model

AU - Kuo, Jui-Chao

AU - Chen, Delphic

AU - Tung, Shih Heng

AU - Shih, Ming Hsiang

PY - 2008/6/1

Y1 - 2008/6/1

N2 - The orientation spread in an aluminum bicrystal was predicted using a DIC-based Taylor model during plane strain compression up to a strain of 5%. The modified Taylor model was integrated with a digital image correlation (DIC) technique, with the aid of which the micro-strain behavior of the bicrystal was investigated, using an experimental approach on one hand and, on the other hand, the strain components determined by DIC were computed for the local orientation rotation together with a Taylor model. It was observed that the higher crystal deforms more than the low crystal. The orientation spread predicted using the modified Taylor model shows a similar trend as that measured by EBSD for the higher crystal, but the spread direction of the low crystal was not correctly predicted using the DIC-based Taylor model.

AB - The orientation spread in an aluminum bicrystal was predicted using a DIC-based Taylor model during plane strain compression up to a strain of 5%. The modified Taylor model was integrated with a digital image correlation (DIC) technique, with the aid of which the micro-strain behavior of the bicrystal was investigated, using an experimental approach on one hand and, on the other hand, the strain components determined by DIC were computed for the local orientation rotation together with a Taylor model. It was observed that the higher crystal deforms more than the low crystal. The orientation spread predicted using the modified Taylor model shows a similar trend as that measured by EBSD for the higher crystal, but the spread direction of the low crystal was not correctly predicted using the DIC-based Taylor model.

UR - http://www.scopus.com/inward/record.url?scp=43049162208&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=43049162208&partnerID=8YFLogxK

U2 - 10.1016/j.commatsci.2007.09.004

DO - 10.1016/j.commatsci.2007.09.004

M3 - Article

VL - 42

SP - 564

EP - 569

JO - Computational Materials Science

JF - Computational Materials Science

SN - 0927-0256

IS - 4

ER -