TY - GEN
T1 - Preparation and characterization of cubic and rod-shaped indium tin oxide powders using the hydrothermal process
AU - Hsu, Kuo Chin
AU - Liao, Jiunn Der
AU - Xie, Zheng Zhong
AU - Fu, Yaw Shyan
N1 - Copyright:
Copyright 2013 Elsevier B.V., All rights reserved.
PY - 2013
Y1 - 2013
N2 - The cubic and rod-shaped powders of indium tin oxide were synthesized at a stable temperature reaction for 18h using the surfactant aid hydrothermal method under various conditions. The cubic and rod-shaped powder size changes with the concentration of the precursor. The finished products of indium tin oxide can be obtained by calcination at 500°C for 2h in air. Characterization was conducted using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffractometry (XRD), thermogravimetric analyzer/differential thermal analysis (TG/DTA) and the Brunauer-Emmett-Teller (BET). XRD analysis shows that the conditions of this experiment can produce pure ITO powders. The characterization of cubic and rod-shaped ITO powders is also discussed.
AB - The cubic and rod-shaped powders of indium tin oxide were synthesized at a stable temperature reaction for 18h using the surfactant aid hydrothermal method under various conditions. The cubic and rod-shaped powder size changes with the concentration of the precursor. The finished products of indium tin oxide can be obtained by calcination at 500°C for 2h in air. Characterization was conducted using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffractometry (XRD), thermogravimetric analyzer/differential thermal analysis (TG/DTA) and the Brunauer-Emmett-Teller (BET). XRD analysis shows that the conditions of this experiment can produce pure ITO powders. The characterization of cubic and rod-shaped ITO powders is also discussed.
UR - http://www.scopus.com/inward/record.url?scp=84874996562&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84874996562&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/AMM.311.430
DO - 10.4028/www.scientific.net/AMM.311.430
M3 - Conference contribution
AN - SCOPUS:84874996562
SN - 9783037856727
T3 - Applied Mechanics and Materials
SP - 430
EP - 434
BT - Information, Communication and Engineering
T2 - 2012 International Conference on Information, Communication and Engineering, ICICE 2012
Y2 - 15 December 2012 through 20 December 2012
ER -