Preparation and characterization of non-evaporable porous Ti-Zr-V getter films

Chien Cheng Li, Jow Lay Huang, Ran Jin Lin, Ding Fwu Lii

Research output: Contribution to journalArticlepeer-review

18 Citations (Scopus)

Abstract

Highly porous TiZrV film getters on (100) silicon substrates have been successfully grown by the glancing angle dc magnetron sputtering method. The glancing angle is defined as the angle between the surface normal to the substrate and the surface normal to the target. The main deposition parameters that produce the porous TiZrV films are the pressure of sputtering gas Ar and glancing angle at room temperature. The larger the glancing angle is, the higher the porosity and specific surface area of the TiZrV films are. The specific surface area of the dense and porous TiZrV films is 2 m2/g and 13 m2/g, respectively. The diameter of columnar width and inter-distance between the columnar crystals of the porous film are 200 nm and 50 nm, respectively. The columnar width of dense TiZrV films is about 100 nm. The porous TiZrV films have a larger capability to absorb oxygen than that of the dense TiZrV films.

Original languageEnglish
Pages (from-to)3977-3981
Number of pages5
JournalSurface and Coatings Technology
Volume201
Issue number7 SPEC. ISS.
DOIs
Publication statusPublished - 2006 Dec 20

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Preparation and characterization of non-evaporable porous Ti-Zr-V getter films'. Together they form a unique fingerprint.

Cite this